Bi‐Functional Materials for Sulfur Cathode and Lithium Metal Anode of Lithium–Sulfur Batteries: Status and Challenges
Ying Dou
(Country State Center for International Cooperation on Designer Low carbon & Environmental Materials School of Materials Science and Engineering Zhengzhou University 100 Kexue Avenue Zhengzhou 450001 P. R. China)
Junling Guo
(Country State Center for International Cooperation on Designer Low carbon & Environmental Materials School of Materials Science and Engineering Zhengzhou University 100 Kexue Avenue Zhengzhou 450001 P. R. China)
Junke Shao
(Country State Center for International Cooperation on Designer Low carbon & Environmental Materials School of Materials Science and Engineering Zhengzhou University 100 Kexue Avenue Zhengzhou 450001 P. R. China)
Jiaozi Duan
(Country State Center for International Cooperation on Designer Low carbon & Environmental Materials School of Materials Science and Engineering Zhengzhou University 100 Kexue Avenue Zhengzhou 450001 P. R. China)
Huan Liang
(Country State Center for International Cooperation on Designer Low carbon & Environmental Materials School of Materials Science and Engineering Zhengzhou University 100 Kexue Avenue Zhengzhou 450001 P. R. China)
Xing Cheng
(Shenzhen All‐Solid‐State Lithium Battery Electrolyte Engineering Research Center Institute of Materials Research (IMR) Tsinghua Shenzhen International Graduate School Tsinghua University Shenzhen 518055 P. R. China)
Yanbing He
(Shenzhen All‐Solid‐State Lithium Battery Electrolyte Engineering Research Center Institute of Materials Research (IMR) Tsinghua Shenzhen International Graduate School Tsinghua University Shenzhen 518055 P. R. China)
Jinping Liu
(School of Chemistry Chemical Engineering and Life Science State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan 430070 P. R. China)
Abstract Over the past decade, the most fundamental challenges faced by the development of lithium–sulfur batteries (LSBs) and their effective solutions have been extensively studied. To further transfer LSBs from the research phase into the industrial phase, strategies to improve the performance of LSBs under practical conditions are comprehensively investigated. These strategies can simultaneously optimize the sulfur cathode and Li‐metal anode to account for their interactions under practical conditions, without involving complex preparation or costly processes. Therefore, “two‐in‐one” strategies, which meet the above requirements because they can simultaneously improve the performance of both electrodes, are widely investigated. However, their development faces several challenges, such as confused design ideas for bi‐functional sites and simplex evaluation methods (i. e. evaluating strategies based on their bi‐functionality only). To date, as few reviews have focused on these challenges, the modification direction of these strategies is indistinct, hindering further developments in the field. In this review, the advances achieved in “two‐in‐one” strategies and categorizing them based on their design ideas are summarized. These strategies are then comprehensively evaluated in terms of bi‐functionality, large‐scale preparation, impact on energy density, and economy. Finally, the challenges still faced by these strategies and some research prospects are discussed.
Ying Dou, Junling Guo, Junke Shao, et al. (2024). "Bi‐Functional Materials for Sulfur Cathode and Lithium Metal Anode of Lithium–Sulfur Batteries: Status and Challenges". Advanced Science. https://doi.org/10.1002/advs.202407304