Home »
Academic Articles »
C »
Experimental study on the impact of sulfate attack on the performance of shaft lining concrete under sustained compressive load
Experimental study on the impact of sulfate attack on the performance of shaft lining concrete under sustained compressive load
Guo-qiang Xu
(College of Civil and Architectural Engineering, North China University of Science and Technology, Tangshan 063210, China; Hebei Key Laboratory of Earthquake Engineering and Disaster Prevention, Tangshan 063210, China)
Wei Zhang
(College of Civil and Architectural Engineering, North China University of Science and Technology, Tangshan 063210, China; Hebei Key Laboratory of Earthquake Engineering and Disaster Prevention, Tangshan 063210, China; Corresponding author at: College of Civil and Architectural Engineering, North China University of Science and Technology, Tangshan 063210, China.)
Si Chen
(College of Civil and Architectural Engineering, North China University of Science and Technology, Tangshan 063210, China)
Zhen-kai Zhu
(College of Civil and Architectural Engineering, North China University of Science and Technology, Tangshan 063210, China)
Wang-jiu Liu
(College of Civil and Architectural Engineering, North China University of Science and Technology, Tangshan 063210, China)
Journal: Case Studies in Construction Materials
•
• Elsevier
• ISSN: 2214-5095
Abstract
To investigate the impact of sulfate corrosion on the performance of shaft lining concrete under sustained compressive loads, this study immersed samples in a 10 % sodium sulfate solution after subjecting to sustained compressive loads of 0.2fcand 0.4fc. The variation in compressive strength, ultrasonic velocity, and dynamic elasticity modulus with corrosion age were examined. The corrosion mechanisms were analyzed using field emission scanning electron microscope and energy dispersive spectrometer. The impact tendency of concrete was also evaluated. The results indicated that under sustained compressive loads of 0.2fcand 0.4fc, the compressive strength, ultrasonic velocity, and dynamic elasticity modulus are all increased with age, in the order of 0.2fc> 0.4fc>no-load. When exposed to a 10 % sodium sulfate solution under sustained compressive loads, these properties initially increased and then decreased, peaking at 90 days of corrosion age, and the order was 0.2fc> no-load > 0.4fc when the corrosion age was longer than 240 days.The shaft lining concrete exhibited weak impact tendency, with the brittleness index increasing as the corrosion age progressed. The outcome of this work might provide a reference for the further research on the design of shaft lining concrete materials.
Guo-qiang Xu, Wei Zhang, Si Chen, et al. (2024). "Experimental study on the impact of sulfate attack on the performance of shaft lining concrete under sustained compressive load". Case Studies in Construction Materials. https://doi.org/10.1016/j.cscm.2024.e03657