Determination of Optimal Principal Ship Dimensions Considering EEDI and Operational Efficiency

Journal: Journal of Marine Science and Engineering • • MDPI AG • ISSN: 2077-1312

Abstract

The determination of principal dimensions in the early ship design stage requires iterative calculations based on the basis ship particulars and ship owner’s requirements, demanding considerable time and engineering effort. In modern shipbuilding practice, errors introduced at the early design stage carry a high risk of necessitating a complete redesign, particularly under the mandatory EEDI Phase 3 requirements. To address these challenges, this study presents an automated optimization system for the determination of principal dimensions, adopting <inline-formula><math xmlns="http://www.w3.org/1998/Math/MathML" display="inline"><semantics><mrow><msub><mrow><mi>L</mi></mrow><mrow><mi>B</mi><mi>P</mi></mrow></msub></mrow></semantics></math></inline-formula> (Length Between Perpendiculars), B (Breadth), D (Depth), and <inline-formula><math xmlns="http://www.w3.org/1998/Math/MathML" display="inline"><semantics><mrow><msub><mrow><mi>C</mi></mrow><mrow><mi>B</mi></mrow></msub></mrow></semantics></math></inline-formula> (Block Coefficient) as design variables. The NSGA-II (Non-Dominated Sorting Genetic Algorithm) is employed to minimize total resistance (<inline-formula><math xmlns="http://www.w3.org/1998/Math/MathML" display="inline"><semantics><mrow><msub><mrow><mi>R</mi></mrow><mrow><mi>T</mi></mrow></msub></mrow></semantics></math></inline-formula>), specific fuel oil consumption (SFOC), and lightweight (LWT) as objective functions, with EEDI Phase 3 compliance and minimum freeboard requirements imposed as design constraints. The developed program was applied to a 114K Aframax Tanker with VLSFO/LNG dual-fuel capability, yielding a reduction in total resistance of approximately 65 kN relative to the basis ship with improved propulsive efficiency and economic feasibility. The proposed methodology is expected to enhance the efficiency of the early ship design process and provide a systematic framework for meeting stringent environmental regulations.

Subjects & Keywords

How to Cite this Article

Bo-Sung Jung, Seung-Ho Ham (2026). "Determination of Optimal Principal Ship Dimensions Considering EEDI and Operational Efficiency". Journal of Marine Science and Engineering. https://doi.org/10.3390/jmse14100939