Overcoming the sensitivity–speed trade-off in two-dimensional photodetectors via a functional oxide interlayer
Yuhui Yang
(School of Electrical and Electronic Engineering, Nanyang Technological University)
Qingyun Wu
(Science, Mathematics and Technology, Singapore University of Technology and Design, 8 Somapah Road)
Xiangxin Gong
(School of Electrical and Electronic Engineering, Nanyang Technological University)
Ruihuan Duan
(School of Materials Science and Engineering, Nanyang Technological University)
Shi Guo
(School of Electrical and Electronic Engineering, Nanyang Technological University)
Cheng Sun
(Department of Chemistry, Zhejiang University)
Lalit Singh
(School of Electrical and Electronic Engineering, Nanyang Technological University)
Jinpeng Huo
(School of Electrical and Electronic Engineering, Nanyang Technological University)
Sung-Gyu Lee
(School of Electrical and Electronic Engineering, Nanyang Technological University)
Fan Zhang
(School of Electrical and Electronic Engineering, Nanyang Technological University)
Rui Yu
(School of Electrical and Electronic Engineering, Nanyang Technological University)
Wenduo Chen
(School of Electrical and Electronic Engineering, Nanyang Technological University)
Takashi Taniguchi
(Research Center for Materials Nanoarchitectonics, National Institute for Materials Science)
Kenji Watanabe
(Research Center for Electronic and Optical Materials, National Institute for Materials Science)
Fabio Bussolotti
(Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, 08-03 Innovis)
Calvin Pei Yu Wong
(Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, 08-03 Innovis)
Kuan Eng Johnson Goh
(Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, 08-03 Innovis)
Diing Shenp Ang
(School of Electrical and Electronic Engineering, Nanyang Technological University)
Haiming Zhu
(Department of Chemistry, Zhejiang University)
Qi Jie Wang
(School of Electrical and Electronic Engineering, Nanyang Technological University)
Zheng Liu
(School of Materials Science and Engineering, Nanyang Technological University)
Lay Kee Ang
(Science, Mathematics and Technology, Singapore University of Technology and Design, 8 Somapah Road)
Sang Hoon Chae
(School of Electrical and Electronic Engineering, Nanyang Technological University)
Abstract Photodetectors that can achieve both high sensitivity and fast speed remain a challenge due to inherent trade-offs, particularly limiting in photonic integrated circuits. While substantial progress has been made in broadening spectral response, few strategies have directly addressed the simultaneous enhancement of sensitivity and speed. Here, we introduce a two-dimensional photodetector incorporating a functional interlayer, monolayer tungsten oxyselenide (TOS), formed between n-type PdPSe and p-type WSe2. TOS serves multifunctional roles to overcome the trade-offs: suppressing dark current as a hole barrier, enhancing responsivity via photogating, and preserving speed through trap-assisted tunneling and direct tunneling. Under spatially resolved illumination, the device shows a detectivity (D*) of 3.78 × 1015 Jones at 520 nm, with a bandwidth of 0.055 GHz at 785 nm. When integrated onto a silicon photonic platform, it achieves D* of 3.69 × 1011 Jones and a bandwidth of 0.11 GHz at 785 nm, outperforming most reported on-chip photodetectors. These results establish a route to sensitive, high-speed photodetectors for optical interconnect, communications, and sensing applications.
Yuhui Yang, Qingyun Wu, Xiangxin Gong, et al. (2026). "Overcoming the sensitivity–speed trade-off in two-dimensional photodetectors via a functional oxide interlayer". Nature Communications. https://doi.org/10.1038/s41467-026-72259-1