Home »
Academic Articles »
C »
Experimental study on unloading induced shear performances of 3D saw-tooth rock fractures
Experimental study on unloading induced shear performances of 3D saw-tooth rock fractures
Qian Yin
(State Key Laboratory for Geomechanics & Deep Underground Engineering, China University of Mining and Technology, Xuzhou 221116, China)
Xinxin Nie
(State Key Laboratory for Geomechanics & Deep Underground Engineering, China University of Mining and Technology, Xuzhou 221116, China)
Jiangyu Wu
(State Key Laboratory for Geomechanics & Deep Underground Engineering, China University of Mining and Technology, Xuzhou 221116, China; State Key Laboratory of High Performance Civil Engineering Materials, Jiangsu Research Institute of Building Science Co., Ltd., Nanjing 210008, China; Department of Materials, University of Oxford, Oxford OX1 3PH, UK; Corresponding author.)
Qi Wang
(State Key Laboratory for Geomechanics & Deep Underground Engineering, China University of Mining and Technology - Beijing, Beijing 100083, China)
Kaiqi Bian
(State Key Laboratory for Geomechanics & Deep Underground Engineering, China University of Mining and Technology, Xuzhou 221116, China)
Hongwen Jing
(State Key Laboratory for Geomechanics & Deep Underground Engineering, China University of Mining and Technology, Xuzhou 221116, China)
Journal: International Journal of Mining Science and Technology
•
• Elsevier
• ISSN: 2095-2686
Abstract
A fractal model governing saw-tooth fractures was first introduced to replicate sandstone samples containing an inclined 3D penetrating rough fracture surface with various joint roughness coefficients (JRC). In conventional triaxial compression, the peak strength for fractured samples increased with both confining pressure and JRC. During the unloading confining pressure process, the normal stress of fractures declined but the shear stress increased, resulting in shear sliding of fractures. The shear displacement of fractures exponentially increased, and the positive normal displacement decreased gradually to negative values under coupling effects of shear contraction caused by normal stress and shear dilation due to climbing effects of fractures. Transition from quasi-static to dynamic sliding of the fractures was identified. The sliding resistance duration increased with confining pressure but decreased with JRC. After pre-peak unloading, the fracture surfaces presented a more significant surface wear response and JRC values decreased by 1.70%–59.20% due to more remarkable asperity degradation compared with those after conventional triaxial compression. The theoretical model for shear strength of fractures was established through improving the Ladanyi & Archambault model by introducing the relations between normal stress and surface wear ratios of fractures, which agreed well with the experimental results.
Qian Yin, Xinxin Nie, Jiangyu Wu, et al. (2023). "Experimental study on unloading induced shear performances of 3D saw-tooth rock fractures". International Journal of Mining Science and Technology. https://doi.org/10.1016/j.ijmst.2023.02.002