Acoustic Cell Patterning for Structured Cell‐Laden Hydrogel Fibers/Tubules
Qiu Yin
(State Key Laboratory of Mechanical System and Vibration Shanghai Jiao Tong University Shanghai 200240 China)
Yucheng Luo
(Institute of Medical Robotics, School of Biomedical Engineering Shanghai Jiao Tong University No.800 Dongchuan Road Shanghai 200240 China)
Xianglin Yu
(SJTU Paris Elite Institute of Technology Shanghai Jiao Tong University Shanghai 200240 China)
Keke Chen
(Institute of Medical Robotics, School of Biomedical Engineering Shanghai Jiao Tong University No.800 Dongchuan Road Shanghai 200240 China)
Wanlu Li
(School of Biomedical Engineering and Med‐X Research Institute and Shanghai Jiao Tong University Shanghai 200030 P. R. China)
Hu Huang
(Key Laboratory of CNC Equipment Reliability, Ministry of Education, School of Mechanical and Aerospace Engineering Jilin University Changchun Jilin 130022 China)
Lin Zhang
(School of Mechatronic Engineering Changchun University of Technology Changchun 130012 China)
Yinning Zhou
(Joint Key Laboratory of the Ministry of Education, Institute of Applied Physics and Materials Engineering University of Macau, Avenida da Universidade Taipa, Macau 999078 China)
Benpeng Zhu
(School of Integrated Circuit, Wuhan National Laboratory for Optoelectronics Huazhong University of Science and Technology Wuhan 430074 China)
Zhichao Ma
(Institute of Medical Robotics, School of Biomedical Engineering Shanghai Jiao Tong University No.800 Dongchuan Road Shanghai 200240 China)
Wenming Zhang
(State Key Laboratory of Mechanical System and Vibration Shanghai Jiao Tong University Shanghai 200240 China)
Abstract Cell‐laden hydrogel fibers/tubules are one of the fundamentals of tissue engineering. They have been proven as a promising method for constructing biomimetic tissues, such as muscle fibers, nerve conduits, tendon and vessels, etc. However, current hydrogel fiber/tubule production methods have limitations in ordered cell arrangements, thus impeding the biomimetic configurations. Acoustic cell patterning is a cell manipulation method that has good biocompatibility, wide tunability, and is contact‐free. However, there are few studies on acoustic cell patterning for fiber production, especially on the radial figure cell arrangements, which mimic many native tissue‐like cell arrangements. Here, an acoustic cell patterning system that can be used to produce hydrogel fibers/tubules with tunable cell patterns is shown. Cells can be pre‐patterned in the liquid hydrogel before being extruded as cross‐linked hydrogel fibers/tubules. The radial patterns can be tuned with different complexities based on the acoustic resonances. Cell viability assays after 72 h confirm good cell viability and proliferation. Considering the biocompatibility and reliability, the present method can be further used for a variety of biomimetic fabrications.