Reset
Showing 20 of 23 academic articles

Equilibrial service composition model in Cloud manufacturing (ESCM) based on non-cooperative and cooperative game theory for healthcare service equipping

Ehsan Vaziri Goudarzi, Mahmoud Houshmand, Omid Fatahi Valilai, Vahidreza Ghezavati et al. • PeerJ Computer Science (2021)

Industry 4.0 is the digitalization of the manufacturing systems based on Information and Communication Technologies (ICT) for developing a manufacturing system to gain efficiency and improve productivity. Cloud Manufacturing (CM) is a parad...

DOAJ Open Access (DOAJ) DOI: 10.7717/peerj-cs.410

Presenting a Productivity Pattern Based on Social Capital Using the Meta-Synthesis Approach

Ali Heydarnezhad, Seyed Mohammadbagher Jafari, Jafar Rahmani, Hassan Zare Matin • مدیریت بهره وری (2023)

The Asian Productivity Organization (APO) reports a one percent increase in Iran's Total Factor Productivity (TFP) index when compared to the majority of Asian countries and some reference countries in the long-term horizon of 50 years. In ...

DOAJ Open Access (DOAJ) DOI: 10.30495/qjopm.2022.1962985.3407

EFFECT OF COVID-19 ON PSYCHOSOCIAL BEHAVIOUR OF AUTOMOBILE WORKERS PERFORMANCE - AN ERGONOMIC STUDY

Syam Babu Bokka, Anil Kumar Birru, Amandeep Kaur, Netai Chandr Dey et al. • Proceedings on Engineering Sciences (2024)

The COVID-19 lockdown has had a significant negative impact on the automotive industry, particularly on the small and medium-sized businesses and daily wage workers who rely on autonagar industrial area as their main source of income. Emplo...

DOAJ Open Access (DOAJ) DOI: 10.24874/PES.SI.25.03b.010

Nanotechnology and Agroecosystem

CHINNAMUTHU C.R, Murugesa Boopathi P. • Madras Agricultural Journal (2009)

Nanotechnology is working with the smallest possible particles which raise hopes for improving agricultural productivity through encountering problems unsolved conventionally. Improvement of crops in agriculture is a continuous process. Bre...

OPENALEX cc-by DOI: https://doi.org/10.29321/maj.10.100436

Estimation of China’s Green Investment Efficiency in Belt and Road Countries -Based on SBM-Undesirable Model and Malmquist Index Model

Qingxin Lan, Wan Tang, Qiao Hu • Frontiers in Energy Research (2022)

Green and low-carbon development is an important element of the Belt and Road Initiative, and a reasonable and objective evaluation of China’s green investment efficiency in B&R countries is of great significance to promote the sustaina...

DOAJ Open Access (DOAJ) DOI: 10.3389/fenrg.2021.802946

Global supply chains and China’s textile cross-border trade: case study of Jiangsu province

T. Bitkova, T. Chen • Вісник Харківського національного університету імені В.Н. Каразіна: Серія Економіка (2025)

As one of the world's largest producers and exporters of textiles and clothing, China plays a key role in the reconstruction of the global supply chain and in the changes in the international trade situation. China's textile industry, as a ...

DOAJ Open Access (DOAJ) DOI: 10.26565/2311-2379-2025-108-01

Ovule and seed development of crop plants in response to climate change

Mohammad Erfatpour, Dustin MacLean, Rachid Lahlali, Yunfei Jiang • Frontiers in Sustainable Food Systems (2024)

The ovule is a plant structure that upon fertilization, transforms into a seed. Successful fertilization is required for optimum crop productivity and is strongly affected by environmental conditions including temperature and precipitation....

DOAJ Open Access (DOAJ) DOI: 10.3389/fsufs.2024.1495610

Biostimulants in Plant Science: A Global Perspective

Oleg I. Yakhin, Лубянов Александр Александрович, I. A. Yakhin, Patrick H. Brown • Frontiers in Plant Science (2017)

This review presents a comprehensive and systematic study of the field of plant biostimulants and considers the fundamental and innovative principles underlying this technology. The elucidation of the biological basis of biostimulant functi...

OPENALEX cc-by DOI: https://doi.org/10.3389/fpls.2016.02049 PMC: 5266735

REDUCING CLIMATE IMPACTS ON WATER RESOURCES AS THE LEGAL AND ECONOMIC BASIS FOR ENVIRONMENTAL SECURITY IN THE EU CANDIDATE COUNTRIES: THE CASE OF UKRAINE

Ielyzaveta Lvova, Kateryna Kozmuliak, Liudmyla Strutynska-Struk • Baltic Journal of Economic Studies (2022)

As climate change is one of the greatest challenges of our time, the legal and economic issues of global environmental security deserve high praise. In the area of industrial competitiveness, where the negative effects of global climate cha...

DOAJ Open Access (DOAJ) DOI: 10.30525/2256-0742/2022-8-3-101-114

Optimized two-stage process of Haematococcus sp. for enhanced astaxanthin and essential fatty acids accumulation

Pablo N. Refolio-Samperi, Elena Adaschewski, Dieter Hanelt, Abdelfatah Abomohra • Applied Food Research (2025)

The present study evaluated a two-stage process of Haematococcus sp. to enhance the nutritional value by astaxanthin and fatty acid accumulation. Initial screening of different growth media during the green stage, focusing on enhanced bioma...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.afres.2025.101144

Implementation of a Tunnel System for Scaling-Out High-Quality Cassava Planting Material

Jazmín Vanessa Pérez-Pazos, Deimer Fuentes-Cassiani, Sol-Mara Regino, Jorge-Luis García et al. • Plants (2025)

The production of high-quality cassava planting material is a key strategy for mitigating the spread of pests and diseases. To promote the adoption of such strategies by farmers, it is essential to strengthen local capacities through knowle...

DOAJ Open Access (DOAJ) DOI: 10.3390/plants14192983

Bioconversion of Date Waste into Bacterial Nanocellulose by a New Isolate <i>Komagataeibacter</i> sp. IS22 and Its Use as Carrier Support for Probiotics Delivery

Islam Sayah, Ibtissem Chakroun, Claudio Gervasi, Davide Barreca et al. • Foods (2025)

Bacterial nanocellulose (BNC) has gained considerable interest over the last decade due to its unique properties and versatile applications. However, the low yield and the high production cost significantly limit its industrial scalability....

DOAJ Open Access (DOAJ) DOI: 10.3390/foods14162853

Medical Informatics as a Concept and Field-Based Medical Informatics Research: The Case of Turkey

Muhammet Damar, Tuncay Küme, İbrahim Yüksel, Ali Emre Çetinkol et al. • Düzce Tıp Fakültesi Dergisi (2024)

Aim: This study aimed to evaluate the position of Turkey in the field of Medical Informatics and assess the general structure of research by analyzing Medical Informatics research with bibliometric methods. Material and Methods: In this stu...

OPENALEX cc-by-nc-nd DOI: https://doi.org/10.18678/dtfd.1410276

Structural Modeling Based on Supply Chain Integration in Relation to Supply Chain Risk, Product Quality and Innovation Capability

Abolfazl Kazzazi, Amir Mohammad khani • مدیریت بهره وری (2024)

This study aims to investigate the unique features of the food supply chain, examining the impact of food supply chain integration, consisting of internal integration, supplier and customer, the quality of food products and product innovati...

DOAJ Open Access (DOAJ)

The impact of the consistency evaluation policy of generic drugs on the integration of innovation chain and industrial chain in the pharmaceutical manufacturing industry

Yanqing Xie, Wenjing Zhang • Frontiers in Public Health (2026)

IntroductionThe Consistency Evaluation Policy of Generic Drugs is a major quality-oriented regulatory reform in China’s pharmaceutical manufacturing industry. Whether and how this policy facilitates the integration of the innovation chain a...

DOAJ Open Access (DOAJ) DOI: 10.3389/fpubh.2026.1791110

Robots at Work

Georg Graetz, Guy Michaels • The Review of Economics and Statistics (2018)

We analyze for the first time the economic contributions of modern industrial robots, which are flexible, versatile, and autonomous machines. We use novel panel data on robot adoption within industries in seventeen countries from 1993 to 20...

OPENALEX Open Access DOI: https://doi.org/10.1162/rest_a_00754

Cybersecurity for Industry 5.0: trends and gaps

Ravdeep Kour, Ramin Karim, Pierre Dersin, Naveen Venkatesh Sridharan • Frontiers in Computer Science (2024)

Industry 5.0 promises to revolutionize the industry by focusing on human-centric, sustainability, and resilience empowered by emerging technologies such as Artificial Intelligence (AI) and digitalization. This paradigm shift is expected to ...

OPENALEX cc-by DOI: https://doi.org/10.3389/fcomp.2024.1434436