Reset
Showing 20 of 99 academic articles

Mechanochemical Synthesis of TiO<sub>2</sub>-CeO<sub>2</sub> Mixed Oxides Utilized as a Screen-Printed Sensing Material for Oxygen Sensor

Jelena N. Stevanović, Srđan P. Petrović, Nenad B. Tadić, Katarina Cvetanović et al. • Sensors (2023)

TiO2 and CeO2 are well known as oxygen sensing materials. Despite high sensitivity, the actual utilization of these materials in gas detection remains limited. Research conducted over the last two decades has revealed synergistic effects of...

DOAJ Open Access (DOAJ) DOI: 10.3390/s23031313

Organic Waste Bio-Based Materials for 3D Extrusion

Carolina Vasco Costa Delgado, Gabriela Alexandra da Cunha Santos Forman, Rebecca Louise Antoinette Breuer • Convergências - Revista de Investigação e Ensino das Artes (2022)

This study explores bioplastics fabrication based on alginate polymer with added glycerine as a plasticizer, creating flexibility, and organic waste was used as a filler avoiding shrinkage. Exploratory, observational and experimental, Lit...

DOAJ Open Access (DOAJ) DOI: 10.53681/c1514225187514391s.29.133

An innovative and sustainable design of intangible Miao wax printing patterns in combination of diffusion model and fuzzy TOPSIS

Xinhui Kang, Wenjie You, Huaqian Xie • Humanities & Social Sciences Communications (2025)

Abstract Miao wax printing is a dyeing and weaving process in which natural dyes replace chemical dyes. It is renowned for its unique patterns and exquisite craftsmanship. However, with the development of industrialization and the decreasin...

DOAJ Open Access (DOAJ) DOI: 10.1057/s41599-025-05724-9

Design and characterize of kirigami-inspired springs and the application in vertebrae exoskeleton for adolescent idiopathic scoliosis brace treatment

Qiwen Emma Lei, Jing Shu, Junming Wang, Hoi Yan Cheung et al. • Frontiers in Mechanical Engineering (2023)

Adolescent idiopathic scoliosis is a common condition that affects children between the age of 10 and young adulthood. Rigid brace treatment is an effective treatment to control the progression of spinal deformity. However, it limits mobili...

DOAJ Open Access (DOAJ) DOI: 10.3389/fmech.2023.1152930

The Aesthetic Characteristics of the Trompe L'oeil Art in Fashion Design

Prof. Duha Mustafa Al-Demerdash, Lecturer / Kariman Ali Beck Abdul Rahman, Demonstrator / Nihal Nabil Youssef • Maǧallaẗ Al-Turāṯ wa Al-Taṣmīm (2024)

The purpose of this study is to make a contribution to the development of creative fashion culture through the expansion of creative fields in the fashion design area and also the combination of fashion and art techniques, by classifying th...

DOAJ Open Access (DOAJ) DOI: 10.21608/JSOS.2023.194179.1368

TECHNOLOGY DEVELOPMENT FOR THE SEPARATION OF MULTILAYER COMPOSITES

Гітіс МІЛЯУСКАС, Гінтарас ДЕНАФАС • Ecology, Human, Society (2024)

Waste Printed Circuit Boards (WPCBs) are integral components of virtually all electrical and electronic equipment (EEE), forming the structural backbone of the electronics industry. Classified into single-sided, double-sided, multilayer, ri...

DOAJ Open Access (DOAJ) DOI: 10.20535/EHS2710-3315.2024.306206

The Rise of Anthropological Theory

Peter Loïzos, Marvin Harris • British Journal of Sociology (1970)

With the agreement of author and publisher, pre-publication copies of The Rise of Anthropological Theory (New York: Crowell, 1968) were sent for review to 25 scholars. Of these, the followingf responded in time for their reviews to be inclu...

OPENALEX DOI: https://doi.org/10.2307/588281

Clinical Impact of Patient-Specific 3D Models in Neonatal Surgery: A Case-Based Review of Applications and Future Directions

Oscar Girón-Vallejo, Bernardo Garcia-Nuñez, Isidoro Narbona-Arias, Alexander Siles-Hinojosa et al. • Children (2025)

Three-dimensional (3D) modeling and printing technologies are increasingly used in pediatric surgery, offering improved anatomical visualization, surgical planning, and personalized approaches to complex conditions. Compared to standard ima...

DOAJ Open Access (DOAJ) DOI: 10.3390/children12091202

Communication Studies

Yusuf Gürhan Topçu, Aslıhan Doğan Topçu, Duygu ÜNALAN, Şeyhmus DOĞAN et al. • Akademisyen Kitabevi eBooks (2019)

The directors of Academician Publishing House, have been con-ducting their commercial activities for a long time by transferring their 30 years of broadcasting experience to their legal entities. In the said period, it was proud to publish ...

OPENALEX DOI: https://doi.org/10.37609/akya.230

MODEL OF MOTIVATION TO SUCCESS AMONG EMPLOYEES OF PRODUCTION TEAMS: CONTENT AND ANALYSIS OF COMPONENTS

Alina V. Yudina • Вісник Університету імені Альфреда Нобеля. Серія Педагогіка і психология (2021)

The article describes the theoretical generalization and practical application of model motivation to success of employees from production collectives. The article presented the author’s model of motivation to success among employees from...

DOAJ Open Access (DOAJ) DOI: 10.32342/2522-4115-2021-2-22-17

Ei saa me läbi “Pragmaatika” korpuseta. Korpuspragmaatika ja pragmaatikakorpus

Külli Prillop, Tiit Hennoste, Külli Habicht, Helle Metslang • Mäetagused (2021)

Within the project “Pragmatics above grammar: Subjectivity and intersubjectivity in Estonian registers and text types” (PRG341) we are studying the expression of subjectivity and intersubjectivity in different written and spoken registers o...

DOAJ Open Access (DOAJ) DOI: 10.7592/MT2021.81.pragmaatika