Reset
Showing 20 of 52 academic articles

Experimental studies of the influence of the characteristics of the metal bond coat on the durability of the heat-protective coating of the turbine blades of a gas turbine engine

E. V. Samoilenko, V. G. Ugreninov, V. V. Shestakov • Научный вестник МГТУ ГА (2025)

The service life of gas turbine engine (GTE) turbine blades with thermal barrier coatings (TBC) depends on many factors, including the composition, structure and properties of the metal bond coating (MB). The positive effect of using TBC is...

DOAJ Open Access (DOAJ) DOI: 10.26467/2079-0619-2025-28-5-41-49

Experimental study on start-up and steady-state heat transfer performance of heat pipe with liquid bypass line for accelerating working fluid

Youngmi Baek, Euiguk Jung • Case Studies in Thermal Engineering (2022)

This study investigates the start-up and steady-state heat transfer performance of a heat pipe with a bypass line for accelerating a working fluid. The interface resistance by the counterflow of vapor and liquid under the operation of a hea...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.csite.2021.101708

Experimental study on the factors influencing performance and emissions of hydrogen internal combustion engines

Wu Taoyang, Liu Jixu, Wu Chunling, Jing Xiaojun et al. • E3S Web of Conferences (2024)

Hydrogen internal combustion engines (H2-ICEs) have advantages such as clean combustion and zero carbon emissions, and have become one of the important technical routes for decarbonization in the internal combustion engine industry. In this...

DOAJ Open Access (DOAJ) DOI: 10.1051/e3sconf/202452201009

Study of the growth mechanism of a self-assembled and ordered multi-dimensional heterojunction at atomic resolution

Zunyu Liu, Chaoyu Zhao, Shuangfeng Jia, Weiwei Meng et al. • Frontiers of Optoelectronics (2023)

Abstract Multi-dimensional heterojunction materials have attracted much attention due to their intriguing properties, such as high efficiency, wide band gap regulation, low dimensional limitation, versatility and scalability. To further imp...

DOAJ Open Access (DOAJ) DOI: 10.1007/s12200-023-00091-2

Effect of Ageing on a Novel Cobalt-Free Precipitation-Hardenable Martensitic Alloy Produced by SLM: Mechanical, Tribological and Corrosion Behaviour

Inés Pérez-Gonzalo, Florentino Alvarez-Antolin, Alejandro González-Pociño, Luis Borja Peral-Martinez • Journal of Manufacturing and Materials Processing (2025)

This study investigates the mechanical, tribological, and electrochemical behaviour of a novel precipitation-hardenable martensitic alloy produced by selective laser melting (SLM). The alloy was specifically engineered with an optimised com...

DOAJ Open Access (DOAJ) DOI: 10.3390/jmmp9080261

Low-carbon urban transportation: Optimizing mechanical systems for sustainable electric bus and BRT deployment in Kampala

Ismail Kimuli, John Baptist Kirabira • Transportation Engineering (2026)

Kampala faces increasing congestion, air pollution, and dependence on fossil fuels, driven by widespread reliance on diesel minibuses and motorcycle taxis. Existing models—KAMPALA-TIMES, KLAP-TIMES, and GKMA-TIMES–CGE—show strong potential ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.treng.2025.100417

ICESat‐2 Pointing Calibration and Geolocation Performance

S. B. Luthcke, T. C. Thomas, T. A. Pennington, T. W. Rebold et al. • Earth and Space Science (2021)

Abstract ICESat‐2 science requirements are dependent on the accurate real‐time pointing control (i.e., geolocation control) and postprocessed geolocation knowledge of the laser altimeter surface returns. Prelaunch pointing alignment errors ...

DOAJ Open Access (DOAJ) DOI: 10.1029/2020EA001494

Adaptive Health-Aware Fast Charging Strategy Development for Preventing Lithium Plating Based on Digital Twin Model

Yongbo Bu, Guoqing Luo, Minglun Wang, Fuwu Yan • Energies (2025)

Developing smart fast charging strategies can effectively balance the charging efficiency and battery performance. The current mainstream method is to optimize fast charging protocols based on electrochemical models that quantitatively dete...

DOAJ Open Access (DOAJ) DOI: 10.3390/en18236251

Design, manufacturing, and performance evaluation of heat pipe with three-segmented composite wick structure

Jiu Yu, Yubo Hu, Yaoxing Peng • Case Studies in Thermal Engineering (2026)

The wick structure functions as a core component for heat pipe (HP) and stands as one of the critical factors that dictate the performance of HP. Consequently, this paper puts forward an three-segmented composite wick structure, which is ma...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.csite.2026.107724

Investigation of the Friction Performance of G3000 (Variant), GG20, and GG15 (High Carbon) Cast Brake Discs Using the SAE J2522 Procedure

Talha İkbal Çığır, Melih Hakan Samur, Mevlüt Yasin Igdeli • International Journal of Automotive Science and Technology (2025)

This study compares the friction performance of three commonly used cast brake disc materials in the automotive industry: the G3000 variant, GG20, and GG15 (high carbon content). Samples were tested on an inertia dynamometer following the S...

DOAJ Open Access (DOAJ) DOI: 10.30939/ijastech..1811564

Research progress in high thermal conductivity of silicon carbide matrix composites reinforced with fibers

CHEN Qiang, LI Shun, ZHU Li'an, BAI Shuxin et al. • Cailiao gongcheng (2023)

As one kind of advanced high temperature structural and functional materials, it is necessary for fiber reinforced silicon carbide matrix composites (SiC CMCs) in the field of thermal management (TM) to combine the efficient heat transfer a...

DOAJ Open Access (DOAJ) DOI: 10.11868/j.issn.1001-4381.2023.000079

Lie similarity analysis of MHD Casson fluid flow with heat source and variable viscosity over a porous stretching sheet

Thenmozhi D, M. Eswara Rao, Ch. Nagalakshmi, RLV.Renuka Devi et al. • International Journal of Thermofluids (2024)

The current study presents a novel examination of heat transfer properties in a magnetohydrodynamic (MHD) flow of Casson fluid across a porous stretching sheet, uniquely incorporating the effects of heat source and variable viscosity. Unlik...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.ijft.2024.100804

Assessment of hazard recognition performance of thermal power plant workers: A case study of a combined cycle power plant

Romeo Danquah, Gidphil Mensah, Winfred Senyo Agbagah, Francis Davis • Cogent Engineering (2023)

Hazard recognition is a vital skill every thermal power plant worker needs to possess to enhance workplace accident prevention. Facilities and materials used in thermal power plants expose the workers to significant hazards. While some prio...

DOAJ Open Access (DOAJ) DOI: 10.1080/23311916.2023.2252621

A case study on morphological aspects of distinct magnetized 3D hybrid nanoparticles on fluid flow between two orthogonal rotating disks: An application of thermal energy systems

Zahra Abdelmalek, M. Zubair Akbar Qureshi, S. Bilal, Qadeer Raza et al. • Case Studies in Thermal Engineering (2021)

The consolidation power of different nanomaterials such as metallic nanoparticles and metallic-oxides nanoparticles in a new-fangled and energetic hybrid material should give rise to fascinating properties that combine the advantages of eac...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.csite.2020.100744