Home »
Academic Articles & Research Papers
Showing 20 of 33 academic articles
Tie Qu, Qiang Bian, Guang Zeng, Chunjiang Zhao et al. • International Journal of Rotating Machinery
(2022)
The composite cylindrical roller is composed of a hollow cylindrical roller and a filler body and is a new type of structure roller bearing. In order to explore the influence of different parameters on the contact characteristics and vibrat...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2022/7590924
Laura Rathmair, Willi Koller, Clara Egner, Kevin Kitir et al. • Current Issues in Sport Science
(2026)
Introduction & Purpose
Idiopathic torsional deformities of lower limb bones can affect a patient’s gait pattern and joint health, while their cause remains unidentified (Koller et al., 2026). Abnormal joint loadings and the progression of ...
DOAJ
Open Access (DOAJ)
DOI: 10.36950/2026.5ciss011
Qiyuan Dai, Liang Ma, Li Li, Guangjun Tian • Results in Physics
(2023)
Using finite element calculations, we investigated the near field properties of two types of commonly used metal nanostructures (a tip-substrate model representing a scanning tunneling microscope type setup (TS) and a nanoparticle-on-mirror...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.rinp.2023.106360
Linlin Lu, Lecai Liang • Energy Science & Engineering
(2021)
Abstract Buried oil and gas pipelines may face the threat of geological disasters such as landslides, faults, and floods. However, long‐term buried oil and gas pipelines often have corrosion defects, which bring greater challenges to the sa...
DOAJ
Open Access (DOAJ)
DOI: 10.1002/ese3.830
Haider K. AMMASH, Noora N. SHAFFAF • Przegląd Naukowy Inżynieria i Kształtowanie Środowiska
(2023)
Based on the experimental test results of the authors, this investigation is concerned with the finite element analysis to examine and compare the load values and failure modes of the authors’ results. This research was conducted using the ...
DOAJ
Open Access (DOAJ)
DOI: 10.22630/srees.4743
Wonseok Yang • Applied Sciences
(2021)
This study presents a method to predict the flow velocity in a fluid-conveying pipe using vibration signals from the pipe surface. The flexural vibration of a fluid pipe is investigated through wave propagation. The wavenumbers and mode sha...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/app11135779
Chaoqun Zeng, Jing-Pu Tang, Liangliang Wei, Miaochang Zhu et al. • Buildings
(2026)
Reinforced concrete (RC) beams strengthened with carbon-fabric-reinforced cementitious matrix (CFRCM) systems have shown potential for restoring flexural performance, yet their effectiveness under different corrosion levels remains insuffic...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/buildings16020377
Majid Jamal-Omidi, Mohammad Reza Mohammadi Suki • Journal of Mechanical Engineering
(2018)
In this paper, effects of the defect in an adhesively bonded joint have been investigated using cohesive zone modeling. Consequently, a 3D finite element model of a single lap-joint is constructed and validated with experiments. Strength pr...
DOAJ
Open Access (DOAJ)
DOI: 10.2478/scjme-2018-0023
Yaqiong Zhang, Fubin Wang, Jinchao Liu, Heng Zhao et al. • Aerospace
(2024)
The rotating blade is a key component of an aero-engine, and its vibration characteristics have an important impact on the performance of the engine and are vital for condition monitoring. This paper reviews the research progress of blade d...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/aerospace11080638
Zuo Yaju, Fang Mingkun, Zhu Di, Lu Jiahao et al. • E3S Web of Conferences
(2024)
The fluid-structure interaction problem of cylindrical flow around the cylinder is a classic problem, especially in many fields such as energy engineering, fluid dynamics, engineering structure, energy utilization and development, and envir...
DOAJ
Open Access (DOAJ)
DOI: 10.1051/e3sconf/202452001017
Lorenzo Nalbone, Francesco Monac, Luca Nalbone, Tommaso Ingrassia et al. • Journal of Orthopaedics and Traumatology
(2023)
Abstract Background The functional results of total elbow arthroplasty (TEA) are controversial and the medium- to long-term revision rates are relatively high. The aim of the present study was to analyze the stresses of TEA in its classic c...
DOAJ
Open Access (DOAJ)
DOI: 10.1186/s10195-023-00690-x
Yibin Chang, Jian Dai • BioResources
(2023)
The Panjian structure is an important longitudinal connecting member of Song Dynasty hall-type buildings in China. To study the lateral force resistance of such structures, a refined finite element model of Song-style hall-type single-room ...
DOAJ
Open Access (DOAJ)
Xin Chen, Zhi Ye, Jun Yuan Xia, Jie Xiu Wang et al. • Applied Sciences
(2020)
To investigate the feasibility analysis of ultrasonic detection methods applied in the fatigue crack characteristics of steel structures, the double-probe ultrasonic detection method was applied to the prefabricated crack specimens fabricat...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/app10238436
Muhammad Qamar, Ghulam Abbas, Meiyong Liao, Satoshi Koizumi et al. • Scientific Reports
(2026)
Abstract Control over plasmonic properties and local electric field enhancement has become an essential aspect of many modern technologies. Here we investigate these phenomena in graphene / hexagonal boron nitride (G/h-BN) heterostructures ...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41598-026-40039-y
HOU YanYan, CHANG Qing, HU XiWen, PENG XianLong • Jixie qiangdu
(2023)
Active gear design is a method that can pre-control gear meshing performance directly. In order to study the influence of active gear design on the bearing characteristics of tooth surface, the relationship between active modification param...
DOAJ
Open Access (DOAJ)
Wei Wei, Qiang Li, Fangchao Xu, Xiaoyou Zhang et al. • Actuators
(2020)
This paper proposes an electromagnetic actuator that concurrently realizes two working functions of vibration suppression and energy regeneration. The actuator consists of four permanent magnetic rings, three soft iron rings, three coils, a...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/act9020042
Maribel Hernández, Ricardo R. Ambriz, Christian García, David Jaramillo • Metals
(2020)
The gas metal arc welding (GMAW) process was used to weld 3003-H14 plates under restricted and unrestricted thermal expansion. Experimental and numerical analysis were conducted to determine the relation between weld thermal cycles and resi...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/met10060708
Kazuhei AOYAGI, Eiichi ISHII, Tsuyoshi ISHIDA • Journal of MMIJ
(2017)
In the construction of a deep underground facility, the hydromechanical properties of the rock mass around an underground opening are changed significantly due to stress redistribution. This zone is called an excavation damaged zone (EDZ). ...
DOAJ
Open Access (DOAJ)
DOI: 10.2473/journalofmmij.133.25
WANG Xiao-ya • Gong-kuang zidonghua
(2013)
Electromagnetic interference mechanism of interconnect cables was analyzed, and mathematical model of multi-conductor interconnect crosstalk coupling was established. Capacitance matrix and inductance matrix of mine-used four-core interconn...
DOAJ
Open Access (DOAJ)
José Salvado, Maria do Rosário Calado, António Espírito Santo, Anna Guerman • Modelling and Simulation in Engineering
(2017)
This paper addresses the problem of vibrations produced by switched reluctance actuators, focusing on the linear configuration of this type of machines, aiming at its characterization regarding the structural vibrations. The complexity of t...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2017/3258376