Reset
Showing 20 of 31 academic articles

Design and characterize of kirigami-inspired springs and the application in vertebrae exoskeleton for adolescent idiopathic scoliosis brace treatment

Qiwen Emma Lei, Jing Shu, Junming Wang, Hoi Yan Cheung et al. • Frontiers in Mechanical Engineering (2023)

Adolescent idiopathic scoliosis is a common condition that affects children between the age of 10 and young adulthood. Rigid brace treatment is an effective treatment to control the progression of spinal deformity. However, it limits mobili...

DOAJ Open Access (DOAJ) DOI: 10.3389/fmech.2023.1152930

Study on Contact Force and Vibration Characteristics of Composite Cylindrical Roller Bearing

Tie Qu, Qiang Bian, Guang Zeng, Chunjiang Zhao et al. • International Journal of Rotating Machinery (2022)

The composite cylindrical roller is composed of a hollow cylindrical roller and a filler body and is a new type of structure roller bearing. In order to explore the influence of different parameters on the contact characteristics and vibrat...

DOAJ Open Access (DOAJ) DOI: 10.1155/2022/7590924

Alterations in Hip and Knee Joint Contact Force Waveforms and Orientation Induced by Gait Modifications: A Case Study

Laura Rathmair, Willi Koller, Clara Egner, Kevin Kitir et al. • Current Issues in Sport Science (2026)

Introduction & Purpose Idiopathic torsional deformities of lower limb bones can affect a patient’s gait pattern and joint health, while their cause remains unidentified (Koller et al., 2026). Abnormal joint loadings and the progression of ...

DOAJ Open Access (DOAJ) DOI: 10.36950/2026.5ciss011

Simulation and experimental verification of the edge effect of composites on the infiltration process of RTM forming

ZHU Hongye, WANG Xiaoxu, LYU Jixiang, HAO Shulei • Xi'an Gongcheng Daxue xuebao (2025)

To study the influence of edge effects on the resin filling flow pattern in the RTM process of composite materials, the finite element software PAM-RTM was used to simulate and analyze the impregnation process of the blade preforms in RTM.B...

DOAJ Open Access (DOAJ) DOI: 10.13338/j.issn.1674-649x.2025.04.002

Numerical investigation of corroded middle‐high strength pipeline subjected to combined internal pressure and axial compressive loading

Linlin Lu, Lecai Liang • Energy Science & Engineering (2021)

Abstract Buried oil and gas pipelines may face the threat of geological disasters such as landslides, faults, and floods. However, long‐term buried oil and gas pipelines often have corrosion defects, which bring greater challenges to the sa...

DOAJ Open Access (DOAJ) DOI: 10.1002/ese3.830

Non- Linear FE Modeling of Two-Way Reinforced Concrete Slab of NSC, HSC and LWC under Concentrated Load

Shatha S. Kareem, Shaimaa T. Sakin, Mohammad Z. Yousif • Journal of Engineering and Sustainable Development (2013)

This paper presents the numerical study to simulate the behavior six specimens of two-way RC slab of normal strength concrete (NSC), high strength concrete (HSC) and light weight concrete (LWC) with two steel ratio of 0.005 and 0.002 under ...

DOAJ Open Access (DOAJ)

top-ii-vol: Massively Parallel Scalable Meshing for Seismic Risk Assessment of Nuclear Sites

Badri M.A., Bourcier C., Foerster E. • EPJ Web of Conferences (2024)

High performance computing is widely used for conducting high-resolution geophysics Finite Element Method (FEM) simulations. These simulations are crucial for risk assessment at nuclear sites and help gain deeper insights into underlying ph...

DOAJ Open Access (DOAJ) DOI: 10.1051/epjconf/202430205007

Behavior study of the steel plate girder with a cellular honeycomb web

Haider K. AMMASH, Noora N. SHAFFAF • Przegląd Naukowy Inżynieria i Kształtowanie Środowiska (2023)

Based on the experimental test results of the authors, this investigation is concerned with the finite element analysis to examine and compare the load values and failure modes of the authors’ results. This research was conducted using the ...

DOAJ Open Access (DOAJ) DOI: 10.22630/srees.4743

Misalignment-modulated magnetoelastic transduction for field-tunable stiffness in chain-like magnetorheological elastomers: a Green-function-weighted traction-transfer framework

ShuLei Sun, Kesheng Zhang, Shunke Zhang, Ning Tian et al. • Materials Research Express (2026)

Magnetorheological elastomers (MREs) are field-responsive composites whose stiffness can be tuned by a magnetic field. In chain-like MREs, strong local magnetic interactions and Maxwell tractions do not necessarily translate into a measurab...

DOAJ Open Access (DOAJ) DOI: 10.1088/2053-1591/aeb47a

Flexural Behaviour of Corroded RC Beams Strengthened with CFRCM: Refined Modelling, Parametric Analysis, and Design Assessment

Chaoqun Zeng, Jing-Pu Tang, Liangliang Wei, Miaochang Zhu et al. • Buildings (2026)

Reinforced concrete (RC) beams strengthened with carbon-fabric-reinforced cementitious matrix (CFRCM) systems have shown potential for restoring flexural performance, yet their effectiveness under different corrosion levels remains insuffic...

DOAJ Open Access (DOAJ) DOI: 10.3390/buildings16020377

Study of a constrained finite element elbow prosthesis: the influence of the implant placement

Lorenzo Nalbone, Francesco Monac, Luca Nalbone, Tommaso Ingrassia et al. • Journal of Orthopaedics and Traumatology (2023)

Abstract Background The functional results of total elbow arthroplasty (TEA) are controversial and the medium- to long-term revision rates are relatively high. The aim of the present study was to analyze the stresses of TEA in its classic c...

DOAJ Open Access (DOAJ) DOI: 10.1186/s10195-023-00690-x

Deflection and bending moment dynamic load allowance of runway bridges: Theoretical and numerical studies

Yuxin Xue, Wei Hou, Yongjun Zhou, Huichi Li et al. • Journal of Traffic and Transportation Engineering (English ed. Online) (2026)

Runway bridges offer a practical structural solution for airport construction in terrain-constrained areas. However, their dynamic behavior under aircraft landing loads remains insufficiently studied, and design-oriented theoretical guidanc...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jtte.2026.01.002

Structural performance of FRP composite bars reinforced rubberized concrete compressive members: Tests and numerical modeling

Ali Raza, Khaled Mohamed Elhadi, Muhammad Abid, Ahmed Farouk Deifalla et al. • Heliyon (2024)

Waste tyre rubber has become an environmental and health concern that needs to be sustainably managed to avoid fire hazards and save natural resources. This research work aims to study the structural behavior of glass fiber reinforced polym...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.heliyon.2024.e26222

Computational analysis of visible frequency plasmonic properties of graphene on wide band gap heterostructures

Muhammad Qamar, Ghulam Abbas, Meiyong Liao, Satoshi Koizumi et al. • Scientific Reports (2026)

Abstract Control over plasmonic properties and local electric field enhancement has become an essential aspect of many modern technologies. Here we investigate these phenomena in graphene / hexagonal boron nitride (G/h-BN) heterostructures ...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-026-40039-y

Conjugate mixed convection heat transfer with internal heat generation in a lid-driven enclosure with spinning solid cylinder

Md. Jisan Mahmud, Ahmed Imtiaz Rais, Md. Rakib Hossain, Sumon Saha • Heliyon (2022)

The current study investigates conjugate mixed convection heat transmission with internal heat generation in a square enclosure driven by a sliding lid and a solid cylinder with a heat-conducting surface at its center. The enclosure has a s...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.heliyon.2022.e11968

A study on high-shear and low-pressure grinding with body-armour-like abrasive tool (BAAT) for Inconel 718 superalloys

Yebing Tian, Chengjin Tian, Sohini Chowdhury, Jinguo Han et al. • Journal of Materials Research and Technology (2023)

A novel body-armour-like abrasive tool (BAAT) was developed for the high-shear and low-pressure grinding of super alloys with an aim to reduce the ratio of normal force to tangential force. A composite process model was developed based on f...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2023.04.205