Reset
Showing 20 of 2,264 academic articles

Healthcare professionals' and students' perspectives on artificial intelligence in clinical documentation in eastern Saudi Arabia: Factors influencing adoption and utilization

Nouf Khalid Al-Kahtani, Arun Vijay Subbarayalu, Vinoth Raman, Mona M. Jamjoom et al. • Informatics in Medicine Unlocked (2025)

The increasing universal acceptance of artificial intelligence (AI) in healthcare systems is driving advancements, with clinical documentation at the forefront. This research aimed to gain insight into the views, perspectives, and influenci...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.imu.2025.101710

Collaboration opportunities for driving sustainable farming systems and local communities: The case of banana cooperatives in Thailand

Haruhiko Iba, Apichaya Lilavanichakul • Societal Impacts (2024)

Developing sustainable farming systems is necessary to realize profitable and eco-friendly farms that benefit society. As Thailand is increasingly facing climate crisis, production damage, and economic loss for farmers, alternative solution...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.socimp.2024.100087

CSR, Digital Transformation, and Internal Control: Three-Way Interaction Effect on the Firm Value of Chinese Listed Companies

Jae Wook Yoo, Bu Fan, Yu Jin Chang • Systems (2024)

CSR has become a key issue for the qualitative growth of the Chinese economy, while digital transformation has emerged as a crucial strategy for enhancing company competitiveness. Thus, the complex impact of CSR and digital transformation o...

DOAJ Open Access (DOAJ) DOI: 10.3390/systems12070236

Information overload in the information age: a review of the literature from business administration, business psychology, and related disciplines with a bibliometric approach and framework development

Peter Gordon Rötzel • BuR - Business Research (2018)

Abstract In the light of the information age, information overload research in new areas (e.g., social media, virtual collaboration) rises rapidly in many fields of research in business administration with a variety of methods and subjects....

OPENALEX cc-by DOI: https://doi.org/10.1007/s40685-018-0069-z

Design Science in business administration

Cristiane Drebes Pedron, Rosaria de Fátima Segger Macri Russo, Diego Rafael, José da Assunção Moutinho • Revista Ibero-Americana de Estratégia (2024)

Objective of the study: This article aims to analyse the intellectual structure of Design Science in Business Administration. It Identifies the most influential works and journals, the theoretical approaches for the generation of artifacts,...

OPENALEX cc-by-nc-sa DOI: https://doi.org/10.5585/2024.25650

BUSINESS ADMINISTRATION AND BUSINESS HISTORY

Shinzo Kurita • Keiei Shigaku (Japan Business History Review) (1974)

Six articles in this issue are papers read at the common-topics session of the ninth annual meeting of the Business History Society of Japan, held at Kobe University of Commerce on November 10 and 11, 1973.In the opening address, Kurita poi...

OPENALEX Open Access DOI: https://doi.org/10.5029/bhsj.9.1

Spatial layout optimization model integrating layered attention mechanism in the development of smart tourism management

Jie Ding, Lingyan Weng, Lili Fan, Peixue Liu • PeerJ Computer Science (2024)

Tourism demand projection is paramount for both corporate operations and destination management, facilitating tourists in crafting bespoke, multifaceted itineraries and enriching their vacation experiences. This study proposes a multi-layer...

DOAJ Open Access (DOAJ) DOI: 10.7717/peerj-cs.2329

Recurring Construction Risk Categories in Makkah’s Complex Urban Environment: A Colaizzi-Informed Thematic Analysis of Project Managers’ Accounts

Amir A. Hasanain, Khalid Abolkhair, Zahyah H. Alharbi, Abdulrahman A. Altassan • Buildings (2026)

While identifying risks is the first step toward developing response plans, project managers often respond to risks spontaneously. This study aimed to identify recurring construction risk categories reported by project managers in Makkah, e...

DOAJ Open Access (DOAJ) DOI: 10.3390/buildings16193774

Synergetic method between materials flow and energy flow in iron and steel intelligent manufacturing

ZHENG Zhong, HUANG Shi-peng, LONG Jian-yu, GAO Xiao-qiang • 工程科学学报 (2017)

Iron and steel enterprises are facing difficult problems such as increasing inventory, excess capacity, and poor profitability. It is urgent to solve them through the development of green and intelligent manufacturing technology for iron an...

DOAJ Open Access (DOAJ) DOI: 10.13374/j.issn2095-9389.2017.01.015

Comparing the resilience of Sharia and conventional banking to the financial crisis in the Association of Southeast Asian Nations

Suripto, Arif Sugiono, Havid Dasuki • Banks and Bank Systems (2023)

This study aims to analyze the comparison of the resilience of Islamic and conventional banking in the Association of Southeast Asian Nations (ASEAN) during the COVID-19 pandemic. Comparison of banking resilience was proxied by the Capital ...

DOAJ Open Access (DOAJ) DOI: 10.21511/bbs.18(3).2023.16

DESIGN AND STRUCTURAL ANALYSIS OF A PRECAST INDUSTRIAL BUILDING

Tezcan Turalı, R. Tuğrul Erdem, Tolga Yılmaz, H. Selim Şengel • Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi (2026)

This study examines the design and structural analysis of a precast reinforced concrete industrial building composed of three halls. The building includes a partial second floor located in the upper left section of the plan, where the story...

DOAJ Open Access (DOAJ) DOI: 10.31796/ogummf.1919699

A Trust-Boundary Reference Architecture for Secure Cyber-Physical Agriculture: Design and Software-Based Proof-of-Concept for Smart Irrigation

Alvertos Ioannis Mourikis, Iosif Polenakis, Christos Sarantidis, Romanos Kalamatianos et al. • Sensors (2026)

Smart irrigation is an operational technology (OT) problem as much as an Internet of Things (IoT) one: software decisions act directly on valves, pumps, pressure and water delivery, so a spoofed reading or a replayed command has physical co...

DOAJ Open Access (DOAJ) DOI: 10.3390/s26206545

A study of aerodynamic noise in air duct systems with turning vanes

Rašuo Boško, Dinulović Mirko, Trninić Marta, Stamenović Marina et al. • FME Transactions (2021)

Noise is becoming one of the problems in many industrial applications. In this paper the aerodynamic noise in air duct system that arises from air flow passing over a surface of turning vanes is investigated. Based on Proudman's formula usi...

DOAJ Open Access (DOAJ) DOI: 10.5937/fme2102308R

Emerging natural hemp seed proteins and their functions for nutraceutical applications

Haihong Chen, Bing Xu, Yi Wang, Wei Li et al. • Food Science and Human Wellness (2023)

With changing dietary habits and increasing awareness of the nutraceutical role of dietary foods, the demand for natural plant proteins and interest in non-traditional protein sources in the food industry are increasing. Industrial hemp, be...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.fshw.2022.10.016

Influence of Non - Condensable Gases on the Processes of Heat and Mass Transfer during Film Condensation of Steam in Heat Exchangers

Reshetnikov I.F., Shikhalev S.V., Tikhonov S.L. • Problems of the Regional Energetics (2018)

The aim of the article is a quantitative assessment of the influence of non-condensable gases on the intensity of heat and mass transfer processes during film condensation of steam in the specific conditions for heat exchanger. The task is ...

DOAJ Open Access (DOAJ) DOI: 10.5281/zenodo.2222362

Flat Plate based- Solar System with a tracking system

M. Abdunnabi, A. Abusalama, M. Algamil, M. Almontaser • Solar Energy and Sustainable Development (2018)

Water heating in Libyan domestic sector represents over 29% of the total electrical consumption. There is a great potential of hot water usage in the industrial and other sectors. Solar energy can play vital role in providing hot water to t...

DOAJ Open Access (DOAJ)

An aesthetic curve in the field of Industrial design

Toshinobu Harada, Fujiichi Yoshimoto, Masamitsu Moriyama • IEEE Symposium on Visual Languages and Human-Centric Computing (VL/HCC) (1999)

We present a quantitative analysis method of the characteristics of a curve, for finding what an aesthetic curve is. A number of designer drawn curves were analyzed by this method. As a result, we found that the designer controlled the curv...

OPENALEX DOI: https://doi.org/10.1109/vl.1999.795873

The Industrial Design Collection

Christian Wölfel, Jens Krzywinski (2024)

Industrial design at TUD Dresden University of Technology prioritizes human needs and experiencing in designing complex novel systems for desirable futures. For this purpose, it integrates human-centred design, engineering and social scienc...

OPENALEX cc-by-nc-nd DOI: https://doi.org/10.25368/2024.254