Home »
Academic Articles & Research Papers
Showing 20 of 432 academic articles
Daniel J. Amit, Hanoch Gutfreund, Haim Sompolinsky • Physical Review A
(1985)
Two dynamical models, proposed by Hopfield and Little to account for the collective behavior of neural networks, are analyzed. The long-time behavior of these models is governed by the statistical mechanics of infinite-range Ising spin-glas...
OPENALEX
DOI: https://doi.org/10.1103/physreva.32.1007
Hassan Waqas, Shan Ali Khan, Bagh Ali, Dong Liu et al. • Propulsion and Power Research
(2023)
The current article investigates the numerical study of the micropolar nanofluid flow through a 3D rotating surface. This communication may manipulate for the aim such as the delivery of the drug, cooling of electronic chips, nanoscience an...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jppr.2023.05.005
James F. Steiner, Edward Nathan, Kun Hu, Henric Krawczynski et al. • The Astrophysical Journal Letters
(2024)
We present the first X-ray spectropolarimetric results for Cygnus X-1 in its soft state from a campaign of five IXPE observations conducted during 2023 May–June. Companion multiwavelength data during the campaign are likewise shown. The 2–8...
DOAJ
Open Access (DOAJ)
DOI: 10.3847/2041-8213/ad58e4
Moein Shamoushaki, Mehdi Aliehyaei, Marc A. Rosen • Entropy
(2021)
Energy, exergy, and exergoeconomic evaluations of various geothermal configurations are reported. The main operational and economic parameters of the cycles are evaluated and compared. Multi-objective optimization of the cycles is conducted...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/e23111483
Centeno-Pedrazo A, Perez-Arce J, Iliev B, Schubert TJS et al. • RSC advances
(2026)
PMC
PMC Public Access (View-Only)
DOI: 10.1039/d6ra08417f
PMC: PMC13732726
Wang S, Huang X, Tao Y, Kang W et al. • Journal of cleaner production
(2025)
PMC
PMC Public Access (View-Only)
DOI: 10.1016/j.jclepro.2025.146767
PMC: PMC13733619
Zhifu Yin, Zhifu Yin, Biao Lu, Yanbo Chen et al. • Frontiers in Bioengineering and Biotechnology
(2022)
Electron transport layer (ETL), one of the important layers for high-performing perovskite solar cells (PSCs), also has great potential in bioengineering applications. It could be used for biological sensors, biological imaging, and biomedi...
DOAJ
Open Access (DOAJ)
DOI: 10.3389/fbioe.2022.900269
Victor J. Gutierrez-Martinez, Carlos A. Moreno-Bautista, Jose M. Lozano-Garcia, Alejandro Pizano-Martinez et al. • Energies
(2019)
This paper presents the development of a heuristic-based algorithm for a Home Electric Energy Management System (HEEMS). The novelty of the proposal resides in the fact that solutions of the Pareto front, minimizing both the energy consumpt...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/en12040671
Ghaizani Mohamad Aufar, Abdurrosyid Imam, Paryanto Imam, Gozan Misri • E3S Web of Conferences
(2018)
Biodiesel is one of the renewable energy forms that is on demand in Indonesia. In the biodiesel production process, impurities such as Saturated Monoglycerides (SMG) in the form of monostearin that precipitate at low temperature are commonl...
DOAJ
Open Access (DOAJ)
DOI: 10.1051/e3sconf/20185200026
Muhammad Irfan, Naeem Abas, Muhammad Shoaib Saleem • Case Studies in Thermal Engineering
(2018)
With the increase in energy demand globally, environmental risks are also becoming more serious than ever before. Emission of carbon dioxide (CO2) and other greenhouse gases (GHGs) are hastily contributing to global warming and ozone deplet...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.csite.2018.10.008
Søren Djørup, Karl Sperling, Steffen Nielsen, Poul Alborg Østergaard et al. • Energies
(2020)
This paper addresses economic aspects of heat savings in the context of strategic heat planning. The analysis uses the city of Aalborg, Denmark, as a case where municipalisation through a recent acquisition of a coal-fired cogeneration of h...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/en13051172
Kim GB, Lee SY, Woo SH, Lai YR et al. • ACS Omega
(2026)
PMC
PMC Public Access (View-Only)
DOI: 10.1021/acsomega.6c06097
PMC: PMC13737923
Shaimaa Fakhri Jasim, Yasamen Raad Humudat, Suadad Awad Kadhim • Pollution
(2023)
Cold plasma has emerged as a powerful energy-efficient and environmentally friendly advanced oxidation technique in recent decades as a non-thermal approach in a wide range of applications. It is a form of plasma that is created at low temp...
DOAJ
Open Access (DOAJ)
DOI: 10.22059/poll.2023.359913.1923
Dolf J. Gielen, Francisco Boshell, Değer Saygin, Morgan Bazilian et al. • Energy Strategy Reviews
(2019)
This paper explores the technical and economic characteristics of an accelerated energy transition to 2050, using new datasets for renewable energy. The analysis indicates that energy efficiency and renewable energy technologies are the cor...
OPENALEX
cc-by-nc-nd
DOI: https://doi.org/10.1016/j.esr.2019.01.006
Zakia H. Alhashem, Hasna Abdullah Alali, Shehab A. Mansour, Maha A. Tony et al. • Inorganics
(2025)
The process of hydrogen peroxide decomposition, facilitated by copper oxide nanoparticles, produces reactive oxidants that possess the ability to oxidize multiple pollutants. CuO/Cu2O hybrid nanoparticles were successfully synthesized throu...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/inorganics13030097
Chao Ding, Huali Hao, Rui Ma, Changqing Ye et al. • Journal of Materials Research and Technology
(2023)
Al–50Si alloys were prepared by powder extrusion and characterized for electronic packaging. The optimization of powder size, extrusion temperature, and heat treatment parameters was performed to enhance the microstructure and thermo-physic...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2023.11.038
Mohd Izrul Izwan RAMLI, Siti Farahnabilah MUHD AMLI, Norainiza SAUD, Dewi Suriyani CHE HALIN et al. • European Journal of Materials Science and Engineering
(2023)
Hot Air Solder Leveling (HASL) is one of the most commonly used surface finishes in the industry. HASL is also one of the least expensive types of PCB surface finishes available. This study aims to examine the influence on the solder joint ...
DOAJ
Open Access (DOAJ)
DOI: 10.36868/ejmse.2023.08.01.030
Fuat ERDEN, İshak KARAKAYA, Metehan ERDOĞAN • International Journal of Electrochemical Science
(2014)
Mg2Ni is a well-known hydrogen storage alloy. Most of the preparative methods for this alloy require high temperature processing of pure magnesium and nickel. The proposed method, studied in this work, involves the production of Mg2Ni alloy...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/S1452-3981(23)10915-1
Minglong Kang, Li Zhou, Yunlai Deng, Jinqin Lei • Advances in Materials Science and Engineering
(2021)
Multilayer brazeable aluminum alloy sheet is prone to collapse during high-temperature brazing process. The sagging resistance of the aluminum composite sheet needs to be further improved for quality control. Effects of annealing and rate o...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2021/6625548
William D. Callister, David G. Rethwisch (2007)
Chapter 1 - Introduction. 1.1 Historical Perspective 1.2 Materials Science and Engineering 1.3 Why Study Materials Science and Engineering? 1.4 Classification of Materials Materials of Importance-Carbonated Beverage Containers 1.5 Advanced ...
OPENALEX