Home »
Academic Articles & Research Papers
Showing 20 of 43 academic articles
Md. Jisan Mahmud, Ahmed Imtiaz Rais, Md. Rakib Hossain, Sumon Saha • Heliyon
(2022)
The current study investigates conjugate mixed convection heat transmission with internal heat generation in a square enclosure driven by a sliding lid and a solid cylinder with a heat-conducting surface at its center. The enclosure has a s...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.heliyon.2022.e11968
Yebing Tian, Chengjin Tian, Sohini Chowdhury, Jinguo Han et al. • Journal of Materials Research and Technology
(2023)
A novel body-armour-like abrasive tool (BAAT) was developed for the high-shear and low-pressure grinding of super alloys with an aim to reduce the ratio of normal force to tangential force. A composite process model was developed based on f...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2023.04.205
José Salvado, Maria do Rosário Calado, António Espírito Santo, Anna Guerman • Modelling and Simulation in Engineering
(2017)
This paper addresses the problem of vibrations produced by switched reluctance actuators, focusing on the linear configuration of this type of machines, aiming at its characterization regarding the structural vibrations. The complexity of t...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2017/3258376
Mhd Ayham Darwich, Katreen Ebrahem, Maysaa Shash, Hasan Mhd Nazha et al. • Applied Mechanics
(2023)
This study aims to develop an integrated approach for 3D lumbar vertebral biomodel design and analysis, specifically targeting unilevel disc degeneration and the replacement of lumbar artificial discs. Key objectives include improving exist...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/applmech4040063
Khoa Dang Hoang, Kais Atallah, Kais Atallah • The Journal of Engineering
(2019)
This study presents a rapid sizing technique for interior permanent magnet (IPM) machine in traction application considering saturation effects. It is demonstrated that with limited computing resources, sizing, parameters considering satura...
DOAJ
Open Access (DOAJ)
DOI: 10.1049/joe.2018.8169
Renfei Kuang, Jinhai Zhao, Tuo Zhang, Chengyang Li • Journal of Marine Science and Engineering
(2025)
Offshore wind turbines are prone to structural damage over time due to environmental factors, which increases operational costs and the risk of accidents. Early detection of structural damage through monitoring systems can help reduce maint...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/jmse13040629
Kaiwen Shi, Haiyan Su, Xinlong Feng • Entropy
(2022)
In this article, we mainly consider a first order penalty finite element method (PFEM) for the 2D/3D unsteady incompressible magnetohydrodynamic (MHD) equations. The penalty method applies a penalty term to relax the constraint “∇·u=0”, whi...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/e24101395
Sangjun Lee, Jimin Park, Jinuk Kwon, Dong Hwan Kim et al. • Scientific Reports
(2021)
Abstract Transorbital electrical stimulation (tES) has been studied as a new noninvasive method for treating intractable eye diseases by delivering weak electrical current to the eye through a pair of electrodes attached to the skin around ...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41598-021-89243-y
Yuzhen Tang, Hongwei Guo, Wenyao Zhang, Zhiyi Wang et al. • Aerospace
(2023)
To meet the requirements of deployable structures in aerospace engineering with light weight and high stiffness, this paper proposes the triangular space membrane deployable mechanism based on deployable booms, then conducts dynamic analysi...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/aerospace10030239
Zhi Zhu, Min Wang, Huijie Zhang, Xiao Zhang et al. • Metals
(2017)
In this study, a 3D coupled thermo-mechanical finite element model is developed to predict and analyze the defect formation during friction stir welding based on coupled Eulerian Lagrangian method. The model is validated by comparing the es...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/met7070256
Yao Yao, David Howard, Perla Maiolino • Advanced Intelligent Systems
(2026)
Task‐driven design of soft robots requires models that are physically accurate and computationally efficient, while remaining transferable across actuator designs and task scenarios. However, existing modeling approaches typically face a fu...
DOAJ
Open Access (DOAJ)
DOI: 10.1002/aisy.70406
Ye Rim Lee, Justin Neubauer, Kwang Jin Kim, Youngsu Cha • Sensors
(2020)
A common design concept of the piezoelectric force sensor, which is to assemble a bump structure from a flat or fine columnar piezoelectric structure or to use a specific type of electrode, is quite limited. In this paper, we propose a new ...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/s20174840
Han Yu, Xiaofan Zhang, Xiaobiao Shan, Liangxing Hu et al. • Micromachines
(2023)
This work presents a novel bird-shaped broadband piezoelectric energy harvester based on a two-DOF crossed beam for low-frequency environmental vibrations. The harvester features a cantilever mounted on a double-hinged beam, whose rotating ...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/mi14020421
Christos Christodoulou, Michael Georgiopoulos • CERN Document Server (European Organization for Nuclear Research)
(2001)
From the Book:
Since the early 1990s, a plethora of electromagnetic problems have been tackled using neural networks, some more successfully than others. Because neural networks and electromagnetics are two different scientific fields, not...
OPENALEX
Huaixin LI, Changgen YAN, Jiale XIE, Weifeng SUN et al. • 工程科学与技术
(2024)
Objective Pile-soil interaction plays a critical role in slope support engineering. Since the contact surface represents the weakest link in the system, analyzing the influence of the soil shear area on the mechanical properties and the con...
DOAJ
Open Access (DOAJ)
Thorsten Weimar, Christian Hammer • Challenging Glass Conference Proceedings
(2022)
The method of fibre optic strain measurement based on Rayleigh signal analysis enables the detection of the deformation behaviour of laminated glass and the modelling of its load-bearing characteristics. The measurement system is already ca...
DOAJ
Open Access (DOAJ)
Łukasz Sztangret, Mateusz Sztangret, Jan Kusiak, Maciej Pietrzyk • Computer Methods in Materials Science
(2014)
The paper presents the application of plane strain compression (PSC) test to the identification of material model parameters. Moreover, an attempt to substitute the finite element (FE) model with the metamodel in the inverse analysis was ma...
DOAJ
Open Access (DOAJ)
DOI: 10.7494/cmms.2014.4.0493
Abdulrahman Alrumayh, Khaled Alhassoon, Fahd Alsaleem, Mahmoud Shaban et al. • Applied Sciences
(2025)
This paper presents a novel design of a continuum robot driven by electromagnets and springs, offering enhanced precision in multi-degree-of-freedom bending for diverse applications. Traditional continuum robots, while effective in navigati...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/app15020973
Shahab Eshghi, Fatemeh Nabati, Shaghayegh Shafaghi, Vahid Nooraeefar et al. • Scientific Reports
(2022)
Abstract Despite extensive research on the biomechanics of insect wings over the past years, direct mechanical measurements on sensitive wing specimens remain very challenging. This is especially true for examining delicate museum specimens...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41598-022-17859-9
Chunxu Qin, Yiran Ma, Huijuan Liang, Zhifan Wang et al. • Modelling
(2026)
The end-winding insulation structure of stator windings in pumped-storage generator units is complex, with pronounced electric field concentration under out-of-phase conditions, making them critical concerns in insulation design and conditi...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/modelling7050190