Reset
Showing 20 of 78 academic articles

Natural Earth Pigments as Geological Polymineral Systems: A Structured Approach to Provenance and Degradation Assessment in Heritage Science

Sebastiano Ettore Spoto, Roberta Somma • Heritage (2026)

Natural earth pigments are polymineral materials whose present composition may differ from the source because of selection, grinding, heating, mixing, binder incorporation, and later alteration. This study develops a structured method for s...

DOAJ Open Access (DOAJ) DOI: 10.3390/heritage9080322

Lie similarity analysis of MHD Casson fluid flow with heat source and variable viscosity over a porous stretching sheet

Thenmozhi D, M. Eswara Rao, Ch. Nagalakshmi, RLV.Renuka Devi et al. • International Journal of Thermofluids (2024)

The current study presents a novel examination of heat transfer properties in a magnetohydrodynamic (MHD) flow of Casson fluid across a porous stretching sheet, uniquely incorporating the effects of heat source and variable viscosity. Unlik...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.ijft.2024.100804

A study on the Joule-Thomson effect of during filling hydrogen in high pressure tank

Ji-Qiang Li, Yan Chen, Yong Biao Ma, Jeong-Tae Kwon et al. • Case Studies in Thermal Engineering (2023)

With the development of the hydrogen fuel cell automobile industry, higher requirements are put forward for the construction of hydrogen energy infrastructure, the matching of parameters and the control strategy of hydrogen filling rate in ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.csite.2022.102678

Curvature and thermal corrections in tree-level CPT-Violating Leptogenesis

Nick E. Mavromatos, Sarben Sarkar • European Physical Journal C: Particles and Fields (2020)

Abstract In a model for leptogenesis based on spontaneous breaking of Lorentz and $$\mathcal {CPT}$$ CPT symmetry [1–3], we examine the consistency of using the approximation of plane-wave solutions for a free spin-$$\frac{1}{2}$$ 12 Dirac ...

DOAJ Open Access (DOAJ) DOI: 10.1140/epjc/s10052-020-8109-1

Effects of different thermal processing methods on the flavor and precursor substances of the longissimus dorsi muscle in the “Duroc × Landrace × Yorkshire” ternary hybrid pigs

Xinran Yuan, Jialing Tang, Yulin Zhang, Zhengfeng Fang et al. • Food Chemistry: X (2026)

This study investigated the effects of boiling, frying, and roasting on flavor compounds and their precursors in the longissimus dorsi muscle of “Duroc × Landrace × Yorkshire” pigs. HS-SPME-GC–MS, electronic nose analysis, and multivariate ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.fochx.2026.103935

Nuclear Engineering Fundamentals

Robert E. Masterson • CRC Press eBooks (2017)

NUCLEAR ENGINEERING FUNDAMENTALS is the most modern, up-to-date, and reader friendly nuclear engineering textbook on the market today. It provides a thoroughly modern alternative to classical nuclear engineering textbooks that have not been...

OPENALEX DOI: https://doi.org/10.1201/9781315156781

Nuclear Engineering

John C. Lee • Wiley eBooks (2016)

Key attributes and activities of nuclear engineering are described in this article, with a focus placed on basic concepts and mathematical formulations to represent the steady state and transient behavior of nuclear fission reactors. Mechan...

OPENALEX DOI: https://doi.org/10.1002/047134608x.w5211.pub3

Nuclear Engineering Handbook

• CRC Press eBooks (2009)

Section I Introduction: Nuclear Power Reactors * Historical Development of Nuclear Power Kenneth D. Kok * Pressurized Water Reactors Richard Schreiber * Boiling Water Reactors Kevin Theriault * Heavy Water Reactors Alistar I. Miller, John L...

OPENALEX DOI: https://doi.org/10.1201/9781420053913

Introduction to Nuclear Engineering

John R. Lamarsh, Edward Melkonian • Physics Today (1977)

(Most chapters end with References and Problems). 1. Nuclear Engineering. 2. Atomic and Nuclear Physics. Fundamental Particles. Atomic and Nuclear Structure. Atomic and Molecular Weight. Atomic and Nuclear Radii. Mass and Energy. Particle W...

OPENALEX DOI: https://doi.org/10.1063/1.3037597

Effect of Systematic Control of Pd Thickness and Annealing Temperature on the Fabrication and Evolution of Palladium Nanostructures on Si (111) via the Solid State Dewetting

Sundar Kunwar, Puran Pandey, Mao Sui, Quanzhen Zhang et al. • Nanoscale Research Letters (2017)

Abstract Si-based optoelectronic devices embedded with metallic nanoparticles (NPs) have demonstrated the NP shape, size, spacing, and crystallinity dependent on light absorption and emission induced by the localized surface plasmon resonan...

DOAJ Open Access (DOAJ) DOI: 10.1186/s11671-017-2138-1

A case study on morphological aspects of distinct magnetized 3D hybrid nanoparticles on fluid flow between two orthogonal rotating disks: An application of thermal energy systems

Zahra Abdelmalek, M. Zubair Akbar Qureshi, S. Bilal, Qadeer Raza et al. • Case Studies in Thermal Engineering (2021)

The consolidation power of different nanomaterials such as metallic nanoparticles and metallic-oxides nanoparticles in a new-fangled and energetic hybrid material should give rise to fascinating properties that combine the advantages of eac...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.csite.2020.100744

The Thermomechanical Finite Element Analysis of 3003-H14 Plates Joined by the GMAW Process

Maribel Hernández, Ricardo R. Ambriz, Christian García, David Jaramillo • Metals (2020)

The gas metal arc welding (GMAW) process was used to weld 3003-H14 plates under restricted and unrestricted thermal expansion. Experimental and numerical analysis were conducted to determine the relation between weld thermal cycles and resi...

DOAJ Open Access (DOAJ) DOI: 10.3390/met10060708

Impact of micromechanical properties of organic matter on the micro-mesopore structures of the over-mature shale in the Niutitang Formation

Hang Lei, Wenjibin Sun, Yujun Zuo, Zhonghu Wu et al. • Scientific Reports (2025)

Abstract The micromechanical properties of organic matter (OM) and organic pore structures in the over-mature stage are crucial for determining shale reservoir quality and assessing shale gas resource potential. However, there is still deba...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-025-89164-0

Development, modelling and optimization of process parameters on the tensile strength of aluminum, reinforced with pumice and carbonated coal hybrid composites for brake disc application

Tanimu Kogi Ibrahim, Danjuma Saleh Yawas, Julius Thaddaeus, Bashar Danasabe et al. • Scientific Reports (2024)

Abstract This study focuses on optimizing double stir casting process parameters to enhance the tensile strength of hybrid composites comprising aluminum alloy, brown pumice, and coal ash, intended for brake disc applications. Analytical te...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-024-67476-x

Generalized thermoelastic interactions in porous asphaltic material under fractional time derivative

Ibrahim Abbas, Aboelnour Abdalla, Areej Almuneef, Alaa A. El-Bary • Case Studies in Thermal Engineering (2025)

This study investigates generalized thermoelastic interaction in porous asphaltic materials subjected to thermal loading, using fractional model with time-delay effects. The framework incorporates the Riemann-Liouville fractional derivative...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.csite.2025.106304

A First-principles analysis of Structural, Electronic, Elastic, and vacant properties of BCC, FCC and HCP tungsten at different electronic temperatures

X.B. Ye, B.C. Pan • Nuclear Materials and Energy (2023)

Since tungsten (W) was considered as the most promising plasma facing materials (PFMs) in fusion reactors, there has been extensive research on the physical performance of W-PFMs. It is found that under the extreme conditions in a fusion re...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.nme.2023.101447

The use of melting curves as a novel approach for validation of real-time PCR instruments

Helmut Von Keyserling, Thomas Bergmann, Moritz Wiesel, Andreas M. Kaufmann • BioTechniques (2011)

Validation of PCR thermal cycler performance is crucial in order to obtain reliable results. In this study, high resolu- tion melting curve (HRM) analysis is presented as a novel validation method for real-time PCR instruments. By ap- plyin...

DOAJ Open Access (DOAJ) DOI: 10.2144/000113735