Home »
Academic Articles & Research Papers
Showing 16 of 36 academic articles
Abdo M. Al-Fakih, Madzlan Aziz, Hassan H. Abdallah, Zakariya Y. Algamal et al. • International Journal of Electrochemical Science
(2015)
The inhibition of mild steel corrosion in 1 M HCl by 17 furan derivatives was investigated experimentally using potentiodynamic polarization measurements. The furan derivatives inhibit the mild steel corrosion. The experimental inhibition e...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/S1452-3981(23)06562-8
M. Vinod, B. S. Nithyananda, Shrishail B. Sollapur, Satish Gajbhiv et al. • Scientific Reports
(2026)
Abstract This work examined the role of alkaline and epoxy-based surface chemical treatments on the mechanical and thermal properties of flax fiber reinforced Aluminum Alloy 6082 hybrid Fiber Metal Laminates (FMLs), integrated with machine ...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41598-026-58852-w
Fathei Nouh, Omayma El kady, Sabry abdel aziz • International Journal of Industry and Sustainable Development
(2024)
This research addresses the urgent challenges facing the materials and metallurgical industries, driving manufacturers to seek innovative solutions for material recycling. Aluminum scrape in used to manufacture a composite material with a h...
DOAJ
Open Access (DOAJ)
DOI: 10.21608/ijisd.2024.302067.1074
Margaret R. McLean • British Corrosion Journal
(1986)
OPENALEX
DOI: https://doi.org/10.1179/000705986798272019
William F. Smith (1993)
1 Introduction to Materials Science and Engineering 2 Atomic Structure and Bonding 3 Crystal and Amorphous Structures in Materials 4 Solidification, Crystalline Imperfections 5 Thermally Activated Processes and Diffusion in Solids 6 Mechani...
OPENALEX
William D. Callister (1985)
List of Symbols.Introduction.Atomic Structure and Interatomic Bonding.The Structure of Crystalline Solids.Imperfections in Solids.Diffusion.Mechanical Properties of Metals.Dislocations and Strengthening Mechanisms.Failure.Phase Diagrams.Pha...
OPENALEX
Qian Zheng, Chao Lu, Yan Yin, Xiaoli Cui et al. • Journal of Materials Research and Technology
(2025)
As a candidate cladding material for fourth-generation nuclear energy systems, the microstructure and properties of oxide dispersion strengthened 316L (ODS-316L) steel are significantly affected by heat treatment (HT) processes. This paper ...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2025.09.256
Jun Dai, Banglong Yu, Wei Jiang, Hla Min Htun et al. • Advances in Materials Science and Engineering
(2019)
In this paper, dissimilar metal joints of 6061 aluminum alloy and aluminum matrix composite material are investigated by laser welding. TiB2 particles were added into the lap joint. The welding process, microstructure, and the corrosion pro...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2019/2359841
Van Vlack, H Lawrence (1959)
1. Introduction to Materials Science and Engineering. Materials and Civilization. Materials and Engineering. Structure/Properties/Performance. Types of Materials. Summary. Key Words. Practice Problems. Test Problems. 2. Atomic Bonding and C...
OPENALEX
Pedro J. Rivero, Deyo Maeztu Redin, Rafael J. Rodríguez • Metals
(2020)
The use of surface engineering techniques to tune-up the composition of nanostructured thin-films for developing functional coatings with advanced properties is a hot topic within the scientific community. The control of the coating structu...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/met10030350
Xiufeng Wu, Xueli Li, Guangxing Cao, Chao Guo et al. • IEEE Access
(2024)
Bolts are critical components of tunnel linings, essential for ensuring safe tunnel operation. Due to their susceptibility to corrosion and detachment, it is vital to closely monitor them during maintenance. However, identifying a large num...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/ACCESS.2024.3513697
Hossein Kabir, Jordan Wu, Sunav Dahal, Tony Joo et al. • Nature Communications
(2024)
Monitoring water uptake in cementitious systems is crucial to assess their durability against corrosion, salt attack, and freeze-thaw damage. However, gauging absorption currently relies on labor-intensive and infrequent weight measurements...
OPENALEX
cc-by-nc-nd
DOI: https://doi.org/10.1038/s41467-024-53993-w
PMC: 11568162
Rui Pimentel de Figueiredo, Stefan Nordborg Eriksen, Ignacio Rodriguez, Simon Bøgh • Automation
(2025)
Corrosion, a naturally occurring process leading to the deterioration of metallic materials, demands diligent detection for quality control and the preservation of metal-based objects, especially within industrial contexts. Traditional tech...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/automation6020023
Malihe Zeraati, Hossein Abbasi, Parvin Ghaffarzadeh, Narendra Pal Singh Chauhan et al. • Frontiers in Materials
(2022)
Zn–Ni electrophosphate coating is one of the most commonly used materials in industrial applications. The corrosion resistance of this coating is very important in order to achieve the minimum corrosion current of the Zn–Ni electrophosphate...
DOAJ
Open Access (DOAJ)
DOI: 10.3389/fmats.2022.823155
Reese AJ, Hu J, Suntivich J • Proceedings of the National Academy of Sciences of the United States of America
(2026)
PMC
PMC Public Access (View-Only)
DOI: 10.1073/pnas.2538040123
PMC: PMC13167741
Xinchen Xu, Xingpeng Liao, Gaoning Shi, Yuyang Chen et al. • Journal of Magnesium and Alloys
(2026)
Though magnesium alloys possess attractive mechanical properties, their applications are severely limited by galvanic corrosion, due to the rapid anodic dissolution and anomalous hydrogen evolution. In this work, well-tempered metadynamics ...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jma.2026.102217