Home »
Academic Articles & Research Papers
Showing 11 of 31 academic articles
Mhd Ayham Darwich, Katreen Ebrahem, Maysaa Shash, Hasan Mhd Nazha et al. • Applied Mechanics
(2023)
This study aims to develop an integrated approach for 3D lumbar vertebral biomodel design and analysis, specifically targeting unilevel disc degeneration and the replacement of lumbar artificial discs. Key objectives include improving exist...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/applmech4040063
Jian Yang, Lei Zhang, Jun Zhang, Hao Wang et al. • Actuators
(2023)
In this study, the mechanical models of a multilayer combined extrusion cylinder and a steel-wire-winding extrusion cylinder were established and compared using a finite element simulation and existing experimental cases. This work provides...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/act12100369
Khoa Dang Hoang, Kais Atallah, Kais Atallah • The Journal of Engineering
(2019)
This study presents a rapid sizing technique for interior permanent magnet (IPM) machine in traction application considering saturation effects. It is demonstrated that with limited computing resources, sizing, parameters considering satura...
DOAJ
Open Access (DOAJ)
DOI: 10.1049/joe.2018.8169
Renfei Kuang, Jinhai Zhao, Tuo Zhang, Chengyang Li • Journal of Marine Science and Engineering
(2025)
Offshore wind turbines are prone to structural damage over time due to environmental factors, which increases operational costs and the risk of accidents. Early detection of structural damage through monitoring systems can help reduce maint...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/jmse13040629
Sangjun Lee, Jimin Park, Jinuk Kwon, Dong Hwan Kim et al. • Scientific Reports
(2021)
Abstract Transorbital electrical stimulation (tES) has been studied as a new noninvasive method for treating intractable eye diseases by delivering weak electrical current to the eye through a pair of electrodes attached to the skin around ...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41598-021-89243-y
Zhi Zhu, Min Wang, Huijie Zhang, Xiao Zhang et al. • Metals
(2017)
In this study, a 3D coupled thermo-mechanical finite element model is developed to predict and analyze the defect formation during friction stir welding based on coupled Eulerian Lagrangian method. The model is validated by comparing the es...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/met7070256
Dan Cristian Marinescu, Gabriela M. Marinescu (2005)
1 Preface 2 Introduction 2.1 Computing and the Laws of Physics 2.2 Quantum Information 2.3 Quantum Computers 2.4 The Wave and the Corpuscular Nature of Light 2.5 Deterministic versus Probabilistic Photon Behavior 2.6 State Description, Supe...
OPENALEX
Huaixin LI, Changgen YAN, Jiale XIE, Weifeng SUN et al. • 工程科学与技术
(2024)
Objective Pile-soil interaction plays a critical role in slope support engineering. Since the contact surface represents the weakest link in the system, analyzing the influence of the soil shear area on the mechanical properties and the con...
DOAJ
Open Access (DOAJ)
Thorsten Weimar, Christian Hammer • Challenging Glass Conference Proceedings
(2022)
The method of fibre optic strain measurement based on Rayleigh signal analysis enables the detection of the deformation behaviour of laminated glass and the modelling of its load-bearing characteristics. The measurement system is already ca...
DOAJ
Open Access (DOAJ)
Pat Langley B (1995)
Elements of Machine Learning by Pat Langley Preface 1. An overview of machine learning 1.1 The science of machine learning 1.2 Nature of the environment 1.3 Nature of representation and performance 1.4 Nature of the learning component 1.5 F...
OPENALEX
Shifu Liu • Applied Sciences
(2026)
Accurate identification of runway base-course parameters is an important basis for structural condition assessment, yet separating base-course elastic modulus, thickness, and local damage from runway responses under moving aircraft loads re...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/app16188983