Reset
Showing 20 of 128 academic articles

Electrospun Polyamide6 Chitosan Nanofibers Reinforced with Zinc Oxide Nanoparticles and Functionalized MultiWalled Carbon Nanotubes: Some Physical, Mechanical Properties and Bacterial Rejection

Asmaa Alkhfaji • Muthanna Journal of Pure Science (2023)

With the fast development of nanotechnology, the preparation of electrospun nanofibers received increasing interest. Because of their large specific area and superior functional abilities, electrospun nanofiber membranes play an essential r...

DOAJ Open Access (DOAJ) DOI: 10.52113/2/10.02.2023/62-70

Investigation of Microstructure and Mechanical Behavior of Nanomodified Cement-Based Materials

Spyridoula G. Farmaki, Dimitrios A. Exarchos, Vasileios Dracopoulos, Anastasios Gkotzamanis et al. • Applied Mechanics (2026)

Recent advances in nanotechnology have highlighted the transformative potential of carbon-based nanomaterials, such as carbon nanofibers, carbon nanotubes, and graphene, in cementitious systems. These materials have shown a remarkable abili...

DOAJ Open Access (DOAJ) DOI: 10.3390/applmech7010013

Hybrid coatings for orthopaedic implants formed by physical vapour deposition and microarc oxidation

Roman Gabor, Ladislav Cvrček, Martina Doubková, Václav Nehasil et al. • Materials & Design (2022)

This study is focused on the preparation of new hybrid layers intended for surface modification of Ti-6Al-4V alloys for potential orthopaedic and dental applications. Combination of the technology of physical vapour deposition (PVD) and sub...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.matdes.2022.110811

Emerging nanomaterials for novel wound dressings: From metallic nanoparticles and MXene nanosheets to metal-organic frameworks

Gholamreza Faghani, Amir Azarniya • Heliyon (2024)

The growing need for developing reliable and efficient wound dressings has led to recent progress in designing novel materials and formulations for different kinds of wounds caused by traumas, burns, surgeries, and diabetes. In cases of ext...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.heliyon.2024.e39611

Recent advances in the Biosynthesis of Zirconium Oxide Nanoparticles and their Biological Applications

Salam S Alsharari, Muneefah A. Alenezi, Mona S. Al Tami, Mohammed Soliman • مجلة بغداد للعلوم (2023)

A critical milestone in nano-biotechnology is establishing reliable and ecological friendly methods for fabricating metal oxide NPs. Because of their great biodegradable, electrical, mechanical, and optical qualities, zirconia NPs (ZrO2NPs)...

DOAJ Open Access (DOAJ) DOI: 10.21123/bsj.2022.7055

Investigating the Impact of Supernova Feedback on Satellites in Elliptical Galaxies

Sumi Kim, Ena Choi, Amanda C. N. Quirk, Rachel S. Somerville et al. • The Astrophysical Journal (2025)

We investigate the influence of supernova (SN) feedback on the satellites of elliptical host galaxies using hydrodynamic simulations. Utilizing a modified version of the GADGET-3 code, we perform cosmological zoom-in simulations of 11 ellip...

DOAJ Open Access (DOAJ) DOI: 10.3847/1538-4357/adec96

Impact of biomass ash content on biocomposite properties

Xianhui Zhao, Oluwafemi Oyedeji, Erin Webb, Sanjita Wasti et al. • Composites Part C: Open Access (2022)

Owing to its low cost and sustainable nature, lignocellulosic biomass has been utilized for reinforcing polymers, but it is crucial to understand the impact of high-ash concentrations in biomass on composite strength and processing. Biomass...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jcomc.2022.100319

Effects of adding bamboo fiber on various aspects of concrete performance: A state-of-the-art review

Longping Yan, Muwang Wei, Lei Huang, Huawei Li et al. • KSCE Journal of Civil Engineering (2026)

This review systematically examines the role of bamboo fiber (BF) in enhancing the performance of cement-based composites, with a particular focus on workability, mechanical properties, durability, and sustainability. BF, as a renewable and...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.kscej.2026.100676

Effects of Concrete Grades on Strength Characteristics of Metakaolin Modified Recycled Aggregate Concrete

A. U. Adebanjo, B. I. O. Dahunsi, J. O. Labiran • Nigerian Journal of Technological Development (2021)

In this study, locally produced Metakaolin (MK) was used as an admixture in recycled aggregate concrete of grades M 25 and M 30. The content of MK varied from 0-15% at 5% intervals. The physical and mechanical properties (bulk density, spec...

DOAJ Open Access (DOAJ)

Principles of geophysics

Norman H. Sleep, Kouhei Fujita (1997)

PrefaceSolid earth geophysics: what, why and how?Gross properties of the EarthGeochronologyGravityHeat flow and geothermicsMagnetismPaleomagnetismTravel time seismologySeismic waves and other mechanical topicsGlobal gravity and geodynamicsO...

OPENALEX

A novel method for imitating true-triaxial stress path with conventional triaxial apparatus

Xuefeng Li, Zhigang Ma • Geomechanics and Geophysics for Geo-Energy and Geo-Resources (2024)

Abstract The stress paths of the cylindrical specimen in the p–q stress space by controlling the ratio of the axial and the radial loading is guaranteed to be consistent with the cuboid specimen, a novel method for imitating true-triaxial s...

DOAJ Open Access (DOAJ) DOI: 10.1007/s40948-024-00781-x

The mechanism of excavation-induced rockbursts in ultra-thick soft-hard composite coal seams at shallow depths: an experimental study

Gaoang Wang, Sitao Zhu, Fuxing Jiang, Jinhai Liu et al. • Geomechanics and Geophysics for Geo-Energy and Geo-Resources (2026)

Abstract Ultra-thick soft-hard (UTSH) composite coal seams, composed of alternating layers of soft and hard coal, frequently experience severe rockburst accidents during roadway excavation under shallow burial depths (...

DOAJ Open Access (DOAJ) DOI: 10.1007/s40948-025-01007-4

Xylan Is Critical for Proper Bundling and Alignment of Cellulose Microfibrils in Plant Secondary Cell Walls

Jacob D. Crowe, Pengchao Hao, Sivakumar Pattathil, Henry Pan et al. • Frontiers in Plant Science (2021)

Plant biomass represents an abundant and increasingly important natural resource and it mainly consists of a number of cell types that have undergone extensive secondary cell wall (SCW) formation. These cell types are abundant in the stems ...

DOAJ Open Access (DOAJ) DOI: 10.3389/fpls.2021.737690

Anticancer, antioxidant and antibacterial potential of L-Glutaminase (Streptomyces roseolus strain ZKB1) capped silver and zinc oxide nanoparticles and its molecular characterization

Zabin K. Bagewadi, Gouri H. Illanad, T. M. Yunus Khan, Shaik Mohamed Shamsudeen et al. • Bioresources and Bioprocessing (2025)

Abstract The current investigation reports anti-cancer, antioxidant and antibacterial potential of L-Glutaminase (Streptomyces roseolus strain ZKB1) and L-Glutaminase capped nanoparticles. The highest L-Glutaminase production of 9.57 U/mL w...

DOAJ Open Access (DOAJ) DOI: 10.1186/s40643-025-00857-w

The Effect of Different Accelerators on the Vulcanization of EPDM Rubber

Murat Teker, Ayşe Usluoğlu, Esra Öztürk • Journal of the Turkish Chemical Society, Section A: Chemistry (2024)

: EPDM (ethylene propylene diene monomer) is a type of synthetic rubber. The products of rubber have great importance in every part of life. EPDM rubber has high tensile strength, high tension, toughness, and is weather resistant. Therefore...

DOAJ Open Access (DOAJ) DOI: 10.18596/jotcsa.1416132

Engineered Bacterial Cellulose Nanostructured Matrix for Incubation and Release of Drug-Loaded Oil in Water Nanoemulsion

Concetta Di Natale, Concetta Di Natale, Concetta Di Natale, Vincenza De Gregorio et al. • Frontiers in Bioengineering and Biotechnology (2022)

Bacterial cellulose (BC) is a highly pure form of cellulose produced by bacteria, which possesses numerous advantages such as good mechanical properties, high chemical flexibility, and the ability to assemble in nanostructures. Thanks to th...

DOAJ Open Access (DOAJ) DOI: 10.3389/fbioe.2022.851893

Polymer brush in articular cartilage lubrication: Nanoscale modelling and simulation

Nobuhiko Kajinami, Mitsuhiro Matsumoto • Biophysics and Physicobiology (2019)

Human knee joints move smoothly under high load conditions due to articular cartilage and synovial fluid. Much attention is paid to the role of proteoglycans. It is suggested that a part of proteoglycan forms aggregate on the cartilage surf...

DOAJ Open Access (DOAJ) DOI: 10.2142/biophysico.16.0_466