Reset
Showing 20 of 503 academic articles

Optimum calcination temperature for the synthesis of nanostructured alumina for energy storage heat management applications

Ehsan Poorshakoor, Mahdi Darab • Hydrogen, Fuel Cell & Energy Storage (2023)

Heat management for rechargeable energy systems such as lithium-ion batteries are of great performance and safety value. Optimization of solid additives to liquid cooling systems are a field of research for the advanced materials selection ...

DOAJ Open Access (DOAJ) DOI: 10.22104/hfe.2024.6649.1282

Synthetic biology open language (SBOL) version 3.1.0

Buecherl Lukas, Mitchell Thomas, Scott-Brown James, Vaidyanathan Prashant et al. • Journal of Integrative Bioinformatics (2023)

Synthetic biology builds upon genetics, molecular biology, and metabolic engineering by applying engineering principles to the design of biological systems. When designing a synthetic system, synthetic biologists need to exchange informatio...

DOAJ Open Access (DOAJ) DOI: 10.1515/jib-2022-0058

Four-dimensional reconfigurable vascular tunneling machine of spatially programmed liquid crystal elastomers

Yi Li, Yuan Gao, Yifei Li, Naiyu Guan et al. • Nature Communications (2026)

Abstract Thrombosis in tortuous vessels causes blockages and pathological conditions. Current thrombolytics are inefficient, and mechanical thrombectomies lack adaptability, hindering thrombus clearance in complex geometries. Here, we propo...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41467-026-73495-1

The New Statistics

Geoff Cumming • Psychological Science (2013)

We need to make substantial changes to how we conduct research. First, in response to heightened concern that our published research literature is incomplete and untrustworthy, we need new requirements to ensure research integrity. These in...

OPENALEX DOI: https://doi.org/10.1177/0956797613504966

Oxford Textbook of Public Health

Roger Detels, Robert Beaglehole, Mary Ann Lansang, Martin C. Gulliford • RePEc: Research Papers in Economics (2011)

SECTION 1: THE DEVELOPMENT OF THE DISCIPLINE OF PUBLIC HEALTH 1.1 The scope and concerns of public health 1.2 The history and development of public health in high-income countries 1.3 The history and development of public health in low- and...

OPENALEX

The metabolic equivalents of one-mile walking by older adults; implications for health promotion

Mandy Lucinda Gault, Mark Elisabeth Theodorus Willems • Health Promotion Perspectives (2017)

Background: Instructions for older adults regarding the intensity of walking may not elicit an intensity to infer health gains. We recorded the metabolic equivalents (METs) during a 1-mile walk using constant and predicted values of resting...

DOAJ Open Access (DOAJ) DOI: 10.15171/hpp.2017.38

Electrorefining behavior of a multicomponent copper alloy derived from waste printed circuit boards

Florentina Niculescu, Ion Pencea, Mirela Stănescu, Gheorghe Iacob et al. • Chemical Engineering Journal Advances (2026)

Efficient recycling of waste electrical and electronic equipment (WEEE) is a major priority for the circular economy and sustainable resource management. This study proposes and investigates an integrated mechanical, pyrometallurgical, and ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.ceja.2026.101418

CoCO3 from one-step micro-emulsion method as electrode materials for Faradaic capacitors

Yanfang Wang, Zheng Chang, Yi Zhang, Bingwei Chen et al. • Scientific Reports (2017)

Abstract Faradaic capacitor (FC) has been widely investigated during the past few decades, and dozens of prototypes have been proposed. However, it has not reached its full potential. In this work, we demonstrate a kind of FC comprising of ...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-017-02004-8

Electrical and magnetic properties of antiferromagnetic semiconductor MnSi2N4 monolayer

Dongke Chen, Dongke Chen, Zhengyu Jiang, Ying Tang et al. • Frontiers in Chemistry (2022)

Two-dimensional antiferromagnetic semiconductors have triggered significant attention due to their unique physical properties and broad application. Based on first-principles calculations, a novel two-dimensional (2D) antiferromagnetic mate...

DOAJ Open Access (DOAJ) DOI: 10.3389/fchem.2022.1103704

Enhanced Reversibility of Li‐Rich Binary Oxide Cathodes through Synergistic Interfacial Regulation for Improved Charge Transfer Kinetics at High Depth of Charge/Discharge

Qing Zhang, Jiaoyang Cheng, Jinxin Cao, Fang Lian • ChemElectroChem (2025)

Lithium‐rich manganese‐based oxides are accepted as a promising cathode material for high‐energy density batteries. However, they suffer from irreversible structural transformations and detrimental interfacial reactions, especially under de...

DOAJ Open Access (DOAJ) DOI: 10.1002/celc.202500045

Catalytic effect comparison of TiO2 and La2O3 on hydrogen storage thermodynamics and kinetics of the as-milled La-Sm-Mg-Ni-based alloy

Yanghuan Zhang, Xin Wei, Wei Zhang, Zeming Yuan et al. • Journal of Magnesium and Alloys (2021)

In this investigation, mechanical grinding was applied to fabricating the Mg-based alloys La7Sm3Mg80Ni10 + 5 wt.% M (M = None, TiO2, La2O3) (named La7Sm3Mg80Ni10–5 M (M = None, TiO2, La2O3)). The result reveals that the structures of as-mil...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jma.2021.03.006

Laser Welding of Dissimilar Metal Joint of 6061 Al Alloy and Al Matrix Composite

Jun Dai, Banglong Yu, Wei Jiang, Hla Min Htun et al. • Advances in Materials Science and Engineering (2019)

In this paper, dissimilar metal joints of 6061 aluminum alloy and aluminum matrix composite material are investigated by laser welding. TiB2 particles were added into the lap joint. The welding process, microstructure, and the corrosion pro...

DOAJ Open Access (DOAJ) DOI: 10.1155/2019/2359841

Effect of Welding Heat Input on Microstructure and Low-Temperature Toughness of Laser-Arc Hybrid Welded Super-Duplex Stainless-Steel Joints

Shuaimou Zhang, Liangliang Bao, Junhao Sun • Metals (2026)

This paper studies the effect of welding heat input on microstructure and low-temperature toughness of laser-arc hybrid welded (LAHW) SAF2507 super-duplex stainless-steel (SDSS) joints. Heat input was adjusted from 0.204 to 0.407 kJ/mm by c...

DOAJ Open Access (DOAJ) DOI: 10.3390/met16070787

Improvement in energy absorption properties of aluminum foams by designing pore-density distribution

Fateme Hassanli, Mohammad Hossein Paydar • Journal of Materials Research and Technology (2021)

In the present work, effect of structural design on the mechanical properties of aluminum foams was studied. Aluminum foams with a relative density in the range of 0.28–0.48 with uniform and graded pore frequency were fabricated through pow...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2021.06.073

Speciation of Ruthenium(III) Chloro Complexes in Hydrochloric Acid Solutions and Their Extraction Characteristics with an Amide-Containing Amine Compound

Tomoya Suzuki, Takeshi Ogata, Mikiya Tanaka, Tohru Kobayashi et al. • Metals (2018)

The refining of platinum group metals is based mainly on solvent extraction methods, whereas Ru is selectively recovered by distillation as RuO4. Replacement of distillation by extraction is expected to simplify the purification process. To...

DOAJ Open Access (DOAJ) DOI: 10.3390/met8070558