Home »
Academic Articles & Research Papers
Showing 20 of 432 academic articles
Chuan Guo, Geoff Pleiss, Yu Sun, Kilian Q. Weinberger • arXiv (Cornell University)
(2017)
Confidence calibration -- the problem of predicting probability estimates representative of the true correctness likelihood -- is important for classification models in many applications. We discover that modern neural networks, unlike thos...
OPENALEX
Open Access
DOI: https://doi.org/10.48550/arxiv.1706.04599
Daniel Alexis Zárate-Rendón, David Godoy Padilla, Samuel Pizarro Carcausto, Alberto del Águila et al. • Parasite Epidemiology and Control
(2023)
This study aimed to develop maps for Fasciola hepatica infection occurrence in dairy cattle in the districts of Matahuasi and Baños in the Peruvian central highlands. For this, a model based on the correlation between environmental variable...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.parepi.2023.e00329
Malihe Zeraati, Hossein Abbasi, Parvin Ghaffarzadeh, Narendra Pal Singh Chauhan et al. • Frontiers in Materials
(2022)
Zn–Ni electrophosphate coating is one of the most commonly used materials in industrial applications. The corrosion resistance of this coating is very important in order to achieve the minimum corrosion current of the Zn–Ni electrophosphate...
DOAJ
Open Access (DOAJ)
DOI: 10.3389/fmats.2022.823155
Taikang Yuan, Junxing Zhu, Wuxin Wang, Jingze Lu et al. • Remote Sensing
(2023)
Sea surface temperature (SST) prediction has attracted increasing attention, due to its crucial role in understanding the Earth’s climate and ocean system. Existing SST prediction methods are typically based on either physics-based numerica...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/rs15143498
Wesley J. Maddox, Timur Garipov, Pavel Izmailov, Dmitry Vetrov et al. • arXiv (Cornell University)
(2019)
We propose SWA-Gaussian (SWAG), a simple, scalable, and general purpose approach for uncertainty representation and calibration in deep learning. Stochastic Weight Averaging (SWA), which computes the first moment of stochastic gradient desc...
OPENALEX
Open Access
DOI: https://doi.org/10.48550/arxiv.1902.02476
Junpo Yu, Yajun Si, Wen Zhao, Zeyu Zhou et al. • Plants
(2025)
As the world’s largest loess deposit region, the Loess Plateau’s vegetation dynamics are crucial for its regional water–heat balance and ecosystem functioning. Leaf Area Index (LAI) serves as a key indicator bridging canopy architecture and...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/plants14152391
Priya Mathur, Dheeraj Kumar, Farhan Sheth, Hammad Shaikh et al. • Scientific Reports
(2025)
Abstract Accurately predicting the specific heat capacity of nanofluids is critical for optimizing their performance in engineering and industrial applications. This study explores twelve machine learning and deep learning models using conv...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41598-025-28268-z
Zhihao Chen, Jie Gao, Weikai Wang, Zheng Yan • Environmental Research Letters
(2021)
The troposphere is one of the atmospheric layers where most weather phenomena occur. Temperature variations in the troposphere, especially at 500 hPa, a typical level of the middle troposphere, are significant indicators of future weather c...
DOAJ
Open Access (DOAJ)
DOI: 10.1088/1748-9326/abfde9
Noor Hafizah Khairul Anuar, Mohd Amri Md Yunus, Muhammad Ariff Baharudin, Sallehuddin Ibrahim et al. • Journal of Computing Research and Innovation
(2024)
Environmental factors like temperature, solar irradiance, and rain may influence the health and productivity of stingless bees. This paper aims to investigate the best approaches applied in meliponiculture to predict beehive health and prod...
DOAJ
Open Access (DOAJ)
ZHANG Bin1, YIN Haoyu2, ZHANG Tengfei2, WANG Jiangyu1, LU Di1, WANG Lianjie1 • Yuanzineng kexue jishu
(2026)
To meet the computational efficiency requirements for multi-physics simulations in the design and development of advanced reactor cores, a neural network-based acceleration method was investigated for multi-physics coupling calculations in ...
DOAJ
Open Access (DOAJ)
DOI: 10.7538/yzk.2025.youxian.0668
Johannes L. Otto, Lukas M. Sauer, Malte Brink, Thorge Schaum et al. • Materials & Design
(2023)
Nickel-based filler metals are frequently used in high temperature vacuum diffusion brazing for austenitic stainless-steel joints when components are subjected to high static or dynamic loads, corrosive environments and elevated temperature...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.matdes.2023.112401
Natasha Dropka, Stefan Ecklebe, Martin Holena • Crystals
(2021)
The aim of this study was to assess the aptitude of the recurrent Long Short-Term Memory (LSTM) neural networks for fast and accurate predictions of process dynamics in vertical-gradient-freeze growth of gallium arsenide crystals (VGF-GaAs)...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/cryst11020138
Ahmed E. Radwan, David A. Wood, Ahmed A. Radwan • Journal of Rock Mechanics and Geotechnical Engineering
(2022)
Pore pressure is an essential parameter for establishing reservoir conditions, geological interpretation and drilling programs. Pore pressure prediction depends on information from various geophysical logs, seismic, and direct down-hole pre...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jrmge.2022.01.012
Jakob Mannstadt, Arash Rahimi‐Iman • Advanced Sensor Research
(2025)
Abstract A machine‐learning (ML) non‐contact method to determine the temperature of a laser gain medium via its laser emission with a trained few‐layer neural‐network (NN) model is presented. The training of the feed‐forward NN enables the ...
DOAJ
Open Access (DOAJ)
DOI: 10.1002/adsr.70009
Sun Ping • Materials Research Express
(2026)
Polymer solar cells (PSCs) rely on labor-intensive trial-and-error experiments to optimize power conversion efficiency (PCE), due to complex coupling of molecular electronic properties, blend morphology and fabrication parameters. This work...
DOAJ
Open Access (DOAJ)
DOI: 10.1088/2053-1591/aeaacc
Van-Ngoc Pham, Huu-Dao Do, Thi Phuong Khue Nguyen, Van-Khanh Tran et al. • Tạp chí Khoa học và Công nghệ
(2026)
This study develops a data-driven framework using Extreme Gradient Boosting (XGBoost) to predict the Indirect Tensile Strength (ITS) of cement-treated clayey soils. Using 180 specimens with five input variables - cement content, curing time...
DOAJ
Open Access (DOAJ)
DOI: 10.31130/ud-jst.2026.24(7B).582E
Mazen Kadhim Shekedl, Farhad Salimi, Neda Azimi • Journal of Renewable Energy and Environment
(2026)
The efficiency of bio-oil production from municipal solid waste was investigated using microwave-assisted pyrolysis. The effects of temperature, pyrolysis time, and microwave power on bio-oil yield were evaluated using Response Surface Meth...
DOAJ
Open Access (DOAJ)
DOI: 10.30501/jree.2026.563599.2716
Ming Han, Ge Sun, Paul F. Nealey, Juan J. de Pablo • npj Computational Materials
(2025)
Abstract Machine learning (ML) offers considerable promise for the design of new molecules and materials. In real-world applications, the design problem is often domain-specific, and suffers from insufficient data, particularly labeled data...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41524-025-01836-7
Chao Xu, Dezhi Chen, Xiaofu Zhang, Qi Wang et al. • Nature Communications
(2026)
Abstract High temperature Nb-Si based alloys face a critical challenge: achieving adequate room-temperature fracture toughness ( > 18 MPa·m1/2) for processing while maintaining high-temperature strength, properties that typically compete wi...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41467-026-75353-6
Xiaoling Wei, Yongbao Feng, Xiaoxia Han, Zhenxin He • International Transactions on Electrical Energy Systems
(2022)
At present, with the continuous development and great improvement of mechanical manufacturing, processing, and assembly technology, mechanical flow-induced vibration (FIV) with a relatively concentrated frequency domain can be controlled by...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2022/9513357