Reset
Showing 20 of 173 academic articles

Investigation of the Friction Performance of G3000 (Variant), GG20, and GG15 (High Carbon) Cast Brake Discs Using the SAE J2522 Procedure

Talha İkbal Çığır, Melih Hakan Samur, Mevlüt Yasin Igdeli • International Journal of Automotive Science and Technology (2025)

This study compares the friction performance of three commonly used cast brake disc materials in the automotive industry: the G3000 variant, GG20, and GG15 (high carbon content). Samples were tested on an inertia dynamometer following the S...

DOAJ Open Access (DOAJ) DOI: 10.30939/ijastech..1811564

Compression and Tensile Testing of L-PBF Ti-6Al-4V Lattice Structures with Biomimetic Porosities and Strut Geometries for Orthopedic Implants

Dimitri P. Papazoglou, Amy T. Neidhard-Doll, Margaret F. Pinnell, Dathan S. Erdahl et al. • Metals (2024)

In an effort to contribute to the ongoing development of ASTM standards for additively manufactured metal lattice specimens, particularly within the field of medicine, the compressive and tensile mechanical properties of biomimetic lattice ...

DOAJ Open Access (DOAJ) DOI: 10.3390/met14020232

Compost Quality and Markets Are Pivotal for Sustainability in Circular Food-Nutrient Systems: A Case Study of Sri Lanka

Eric D. Roy, Eric D. Roy, Eric D. Roy, Mohamed Esham et al. • Frontiers in Sustainable Food Systems (2021)

Sustainable management of municipal solid waste (MSW) is a critical issue around the world, especially in South Asia where waste generation is expected to double by 2050. Closing the food-nutrient cycle through composting biodegradable MSW ...

DOAJ Open Access (DOAJ) DOI: 10.3389/fsufs.2021.748391

Dissenting Design

Simona Cosentino, Eleonora Lupo • piano b (2017)

As part of the discipline and practice of design (understood in its broadest sense of «strategic problem-solving process that drives innovation, builds business success, and leads to a better quality of life through innovative products, sys...

DOAJ Open Access (DOAJ) DOI: 10.6092/issn.2531-9876/7697

RANCANGAN PENATAAN ARSIP KARYA SENI PERTUNJUKAN UNTUK MENDUKUNG PENGEMBANGAN TRIDHARMA PERGURUAN TINGGI DI ISI SURAKARTA

Wahyu Widyasih • Khazanah: Jurnal Pengembangan Kearsipan (2022)

This study aims to identify the types of art archives and arrange their arrangement designs in order to support the development of the tridharma of higher education at the Indonesian Institute of the Arts (ISI) Surakarta. The archives studi...

DOAJ Open Access (DOAJ) DOI: 10.22146/khazanah.74975

Analyzing the Influence of Place Attachment on Citizens' Environmental Protection Behaviors: A Case Study of Rasht City

Aliakbar Salaripour, Arman Hamidi, Alieh Faridi Foshtomi,, Amir Hosein Nourbakhsh • برنامه‌ریزی توسعه شهری و منطقه‌ای (2024)

Nowadays, a significant aspect of citizens' environmental conduct is intertwined with their connection and emotional bond to the city. This attachment to the urban environment is regarded as a critical element in fostering environmentally c...

DOAJ Open Access (DOAJ) DOI: 10.22054/urdp.2024.76342.1597

Impact of internal remittance on households' use of bank services: evidence from Vietnam

Thu Thi Hoai Nguyen, Hung Manh Le, Le Quoc Hoi, Hang Thu Pham • Journal of Economics Finance and Administrative Science (2022)

Purpose – This study estimates impact of remittances from internal migration on households' use of bank services in Vietnam. Design/methodology/approach – This study uses data from the Vietnam Household Living Standards Survey and the two-s...

DOAJ Open Access (DOAJ) DOI: 10.1108/JEFAS-05-2021-0074

Exploring Practical Paths for the "Last Mile" of Public Digital Cultural Services: An Investigation Based on the Construction of the National Public Culture Cloud Platform

JIN Jiaqin • Nongye tushu qingbao xuebao (2026)

[Purpose/Significance] The delivery of public cultural services at the grassroots level is a key issue in developing China's modern public cultural service system. Although digital technology has created new possibilities for wider access t...

DOAJ Open Access (DOAJ) DOI: 10.13998/j.cnki.issn1002-1248.26-0095

Designed-seamless irradiation technique for extended whole mediastinal proton-beam irradiation for esophageal cancer

Okonogi Noriyuki, Hashimoto Takatuki, Ishida Masaya, Ohno Toshiki et al. • Radiation Oncology (2012)

Abstract Background Proton-beam therapy (PBT) provides therapeutic advantages over conformal x-ray therapy in sparing organs at risk when treating esophageal cancer because of the fundamental physical dose distribution of the proton-beam. H...

DOAJ Open Access (DOAJ) DOI: 10.1186/1748-717X-7-173

Enhancing dental trauma management: insights into physical education graduates’ knowledge and performance

Fahimeh Pakravan, Ali Yousefian Najafabadi, Zohreh Meshkati, Mehdi Nasr Isfahani • BMC Oral Health (2025)

Abstract Introduction Injuries sustained during physical activities are a common concern among athletes, with dental trauma representing a significant yet often under-addressed component. Timely and appropriate intervention is critical to s...

DOAJ Open Access (DOAJ) DOI: 10.1186/s12903-025-06806-5

Research of Multi-Rotor UAVs Detailed Autonomous Inspection Technology of Transmission Lines Based on Route Planning

Tong He, Yihui Zeng, Zhuangli Hu • IEEE Access (2019)

With the rapid development of the economy, the scale of transmission networks has been expanding, bring higher demands and challenges on transmission line operation and maintenance. In this paper, the multi-rotor unmanned aerial vehicles (U...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2019.2935551

ATIB: Design and Evaluation of an Architecture for Brokered Self-Sovereign Identity Integration and Trust-Enhancing Attribute Aggregation for Service Provider

Andreas Gruner, Alexander Muhle, Christoph Meinel • IEEE Access (2021)

Identity management is a principle component of securing online services. In the advancement of traditional identity management patterns, the identity provider remained a Trusted Third Party (TTP). The service provider and the user need to ...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2021.3116095

Introduction to Nuclear Engineering

John R. Lamarsh, Edward Melkonian • Physics Today (1977)

(Most chapters end with References and Problems). 1. Nuclear Engineering. 2. Atomic and Nuclear Physics. Fundamental Particles. Atomic and Nuclear Structure. Atomic and Molecular Weight. Atomic and Nuclear Radii. Mass and Energy. Particle W...

OPENALEX DOI: https://doi.org/10.1063/1.3037597

Application of Particle Size Distribution Engineering and Nano-technology to Cement Recipes for some Iranian Offshore Oilfields

Yaser Pourmazaheri, Hamid Soltanian • Journal of Petroleum Science and Technology (2015)

The design of cement slurry for horizontal wellbores is challenging as it must present very high quality cement slurry properties e.g. zero free water, less than 50 cc API fluid loss value, appropriate rheology and yield point for effective...

DOAJ Open Access (DOAJ) DOI: 10.22078/jpst.2015.504

Chitosan nanoparticles as next-generation carriers for veterinary DNA vaccines: Mechanisms, immune responses, and translational prospects

Miguel González-Lozano, José Alberto Cano-Buendía • Veterinary World (2025)

Background and Aim: Chitosan-based DNA nanoparticles have emerged as a promising next-generation platform for veterinary vaccines, addressing several limitations of conventional attenuated, inactivated, and recombinant formulations. Chitosa...

DOAJ Open Access (DOAJ) DOI: 10.14202/vetworld.2025.3826-3838

Critical Analysis of the Development of the Design of Lattice Tube Concrete Bridges with a Ride on Top

D. S. Spivak, S. V. Kliuchnyk • Nauka ta progres transportu (2024)

Purpose. The paper aims to highlight and substantiate the need to find rational design schemes for lattice tube concrete bridges with a ride on top based on the analysis of recent research and regulatory documents. Methodology. The current ...

DOAJ Open Access (DOAJ) DOI: 10.15802/stp2024/301524