Home »
Academic Articles & Research Papers
Showing 20 of 87 academic articles
Denis A Romanov • Materials Research Express
(2020)
This article describes increasing wear resistance of 5CrNiMo die steel by more than 5 times. This effect is achieved by creating TiC-Ti-Al and TiB _2 -Ti-Al coatings on the surface of 5CrNiMo die steel. The microhardness of the formed coati...
DOAJ
Open Access (DOAJ)
DOI: 10.1088/2053-1591/ab86f6
I. Z. Ismagilov, E. V. Matus, V. V. Kuznetsov, M. A. Kerzhentsev et al. • Eurasian Chemico-Technological Journal
(2016)
Using XPS, BET, XRD, TG-DTA, HRTEM-EDX, TPR and UV-Vis Diffuse Reflectance spectroscopic methods the electronic, redox and structural properties of Mn-Na-W/SiO2 catalysts prepared by the incipient wetness impregnation method and mixture slu...
DOAJ
Open Access (DOAJ)
DOI: 10.18321/ectj430
WANG Zhe-chao 1, 2, ZONG Zhi 1, QIAO Li-ping 1, 2, LI Wei1, LIU Jie 1 • Yantu gongcheng xuebao
(2018)
The bedded carbonaceous slate exhibits transversely isotropic creep properties. The creep behaviors of carbonaceous slate are studied using the triaxial compressive creep tests on horizontal bedding specimens and vertical bedding specimens....
DOAJ
Open Access (DOAJ)
DOI: 10.11779/CJGE201807008
Hang Lei, Wenjibin Sun, Yujun Zuo, Zhonghu Wu et al. • Scientific Reports
(2025)
Abstract The micromechanical properties of organic matter (OM) and organic pore structures in the over-mature stage are crucial for determining shale reservoir quality and assessing shale gas resource potential. However, there is still deba...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41598-025-89164-0
Syed Bustan Fatima Warsi, Biranchi Panda, Pankaj Biswas • Developments in the Built Environment
(2023)
3D Concrete Printing (3DCP) is a growing field of sustainable technology that offers an avenue for rapid industrialisation of the construction industry. Over the years, many non-structural elements have been fabricated by 3D printing, thus ...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.dibe.2023.100295
F.O. Oluyemi, E.D. Ogunmola, A.A. Ajayi, O.C. Olawole • Results in Optics
(2023)
Copper oxide precursor solutions containing 0.10 M, 0.15 M, 0.20 M and 0.25 M concentration of copper were deposited on a glass substrate using the spray pyrolysis method. The structural, optical and surface properties of the resulting copp...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.rio.2023.100416
X.B. Ye, B.C. Pan • Nuclear Materials and Energy
(2023)
Since tungsten (W) was considered as the most promising plasma facing materials (PFMs) in fusion reactors, there has been extensive research on the physical performance of W-PFMs. It is found that under the extreme conditions in a fusion re...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.nme.2023.101447
Paritosh Mishra, Brijesh Prasad, Sunil Chamoli, Ibrahim M. Alarifi • Journal of Materials Research and Technology
(2026)
The escalating demand for lightweight, high-strength structures in the aerospace and automotive sectors necessitates robust joining technologies for dissimilar aluminium alloys. This study systematically investigates the effects of friction...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2026.08.256
Petros Petrounias, Panagiota P. Giannakopoulou, Aikaterini Rogkala, Maria Kalpogiannaki et al. • Applied Sciences
(2022)
This study was based on the reduction of the extraction of natural resources and, at the same time, was focused on the use of by-products and various wastes in construction applications by following the principles of circular economy. Steri...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/app12125861
Vladimir V. Pitulko, Elena Y. Pavlova • Frontiers in Earth Science
(2022)
Ice-rich syncryogenic (termed “Ice Complex”) deposits are common in northern East Siberia and constitute the most important feature of the Quaternary geology of the region. The Ice Complex formed throughout the Late Pleistocene and not only...
DOAJ
Open Access (DOAJ)
DOI: 10.3389/feart.2021.744775
Misra Ravindra Kumar, Porwal Rajesh Kumar • E3S Web of Conferences
(2020)
Metal Inert Gas welding is a fast, reliable and cost effective technique for joining of different ferrous materials and steels used in the construction of large structures like Fe410WA, IS2062, SS304, AISI1040 and AISI316 etc. To obtain bet...
DOAJ
Open Access (DOAJ)
DOI: 10.1051/e3sconf/202018401028
Romuald Gaillard, Alice Marciniak, Guillaume Brisson, Véronique Perreault et al. • Foods
(2022)
Ultra-high pressure homogenization (UHPH) is a promising method for destabilizing and potentially improving the techno-functionality of the egg yolk granule. This study’s objectives were to determine the impact of pressure level (50, 175 an...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/foods11040512
Shuhua Hou, Xianhe Liu, Xiaoqing Shen, Chenyun Zhang et al. • Frontiers in Psychology
(2026)
This study investigates whether English proficiency moderates core Technology Acceptance Model (TAM) pathways in the context of AI-enhanced English MOOCs for vocational students. Drawing on an extended TAM that links Perceived Ease of Use (...
DOAJ
Open Access (DOAJ)
DOI: 10.3389/fpsyg.2026.1772129
Luca Barni, María Ruiz-Muñoz, Manuel Gonzalez-Sanchez, Antonio I. Cuesta-Vargas et al. • Health and Quality of Life Outcomes
(2021)
Abstract Introduction There is no systematic review that analyzes the psychometric properties of questionnaires in Italian. Previous studies have analyzed the psychometric characteristics of instruments for the measurement of pathologies of...
DOAJ
Open Access (DOAJ)
DOI: 10.1186/s12955-021-01891-w
Kejie Mou, Mohnad Abdalla, Dong Qing Wei, Muhammad Tahir Khan et al. • Informatics in Medicine Unlocked
(2021)
Structural proteins of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) are potential drug targets due to their role in the virus life cycle. The envelope (E) protein is one of the structural proteins; plays a critical role in v...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.imu.2021.100675
E. A. Chebotarev, A. D. Lodygin • Современная наука и инновации
(2022)
Five types of protein precipitate can be obtained in the course of whey and its concentrates separation, which, in turn, are divided into precipitates derived from cheese and curd whey. The main factors affecting the moisture content in the...
DOAJ
Open Access (DOAJ)
DOI: 10.37493/2307-910X.2020.3.16
Alexander E. Wendt • International Organization
(1987)
While neorealism and world-system theory both claim to be “structural” theories of international relations, they embody very different understandings of system structure and structural explanation. Neorealists conceptualize system structure...
OPENALEX
DOI: https://doi.org/10.1017/s002081830002751x
Emilie Marie Hafner-Burton, Miles Kahler, Alexander H. Montgomery • International Organization
(2009)
International relations research has regarded networks as a particular mode of organization, distinguished from markets or state hierarchies. In contrast, network analysis permits the investigation and measurement of network structures—emer...
OPENALEX
Open Access
DOI: https://doi.org/10.1017/s0020818309090195
Guledagudd Chaitali B., Praveen Kannam, Kulkarni Vinayak N. • Journal of the Mechanical Behavior of Materials
(2026)
Lightweight aggregate concrete (LWAC) incorporating pumice aggregates offers a sustainable alternative to conventional concrete, enabling a reduced self-weight while maintaining adequate strength and stiffness for structural applications. T...
DOAJ
Open Access (DOAJ)
DOI: 10.1515/jmbm-2025-0113
Alexey S. Vasilchenko, William T. Julian, Olda A. Lapchinskaya, Genrikh S. Katrukha et al. • Frontiers in Microbiology
(2020)
In this work, we report the isolation and detailed functional characterization for the new non-ribosomally synthesized antibiotic 5812-A/C, which was derived from metabolites of Streptomyces roseoflavus INA-Ac-5812. According to its chemica...
DOAJ
Open Access (DOAJ)
DOI: 10.3389/fmicb.2020.556063