Home »
Academic Articles & Research Papers
Showing 20 of 128 academic articles
Deyu Jiang, Miao Luo, Changxi Liu, Yashuo Zhang et al. • Virtual and Physical Prototyping
(2025)
In this study, a Ti1.5Nb1Ta0.5Zr1Mo0.5 (TNTZM) high-entropy alloy was fabricated using laser powder bed fusion (LPBF). By integrating 63 sets of parameter trials with machine learning (ML) models, an optimised process window was identified,...
DOAJ
Open Access (DOAJ)
DOI: 10.1080/17452759.2025.2524524
Soo-Lim Lee, Bong-Ju Kim, Seon-Bong Lee • Machines
(2022)
There is an increasing need for securing development technology for suitable materials to obtain more productive and lightweight automobile parts, including hydrogen fuel cell stack enclosures. Due to the poor moldability of Poly-Phenylene ...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/machines10080625
Shihao Liang, Liang Gao, Yongfeng Zheng, Hao Li • Applied Sciences
(2020)
In recent years, the functionally graded materials (FGM) with cellular structure have become a hot spot in the field of materials research. For the continuously varying cellular structure in the layer-wise FGM, the connection of gradient ce...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/app10217449
Fuzhen Sun, Meng Liu, Baoming Wang, Na Yang et al. • Advances in Materials Science and Engineering
(2022)
Structures with negative Poisson’s ratios have wide applications in automotive design, owing to their excellent mechanical properties and good energy absorption capability. This type of structure can be used to design lightweight components...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2022/3726964
Talha İkbal Çığır, Melih Hakan Samur, Mevlüt Yasin Igdeli • International Journal of Automotive Science and Technology
(2025)
This study compares the friction performance of three commonly used cast brake disc materials in the automotive industry: the G3000 variant, GG20, and GG15 (high carbon content). Samples were tested on an inertia dynamometer following the S...
DOAJ
Open Access (DOAJ)
DOI: 10.30939/ijastech..1811564
Dimitri P. Papazoglou, Amy T. Neidhard-Doll, Margaret F. Pinnell, Dathan S. Erdahl et al. • Metals
(2024)
In an effort to contribute to the ongoing development of ASTM standards for additively manufactured metal lattice specimens, particularly within the field of medicine, the compressive and tensile mechanical properties of biomimetic lattice ...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/met14020232
Majid Jamal-Omidi, Mohammad Reza Mohammadi Suki • Journal of Mechanical Engineering
(2018)
In this paper, effects of the defect in an adhesively bonded joint have been investigated using cohesive zone modeling. Consequently, a 3D finite element model of a single lap-joint is constructed and validated with experiments. Strength pr...
DOAJ
Open Access (DOAJ)
DOI: 10.2478/scjme-2018-0023
Mohamed Afifi, Mohamed Afifi, Muhammad Uba Abdulazeez, Muhammad Uba Abdulazeez et al. • Frontiers in Bioengineering and Biotechnology
(2025)
Road traffic crashes are the leading cause of injuries, disabilities, and fatalities for children and young adults. Extremity joint injuries have been identified as one of the contributing factors to chronic disabilities among children in r...
DOAJ
Open Access (DOAJ)
DOI: 10.3389/fbioe.2025.1667865
Rongchao Xu, Liang Gao, Yiding Jin, Yibo Wang et al. • Geomechanics and Geophysics for Geo-Energy and Geo-Resources
(2025)
Abstract The crack initiation stress (σ ci) and crack damage stress (σ cd) are two important stress thresholds for describing the progressive failure process of rocks. Accurately obtaining these two stress thresholds is crucial for analyzin...
DOAJ
Open Access (DOAJ)
DOI: 10.1007/s40948-025-00940-8
Lorenzo Nalbone, Francesco Monac, Luca Nalbone, Tommaso Ingrassia et al. • Journal of Orthopaedics and Traumatology
(2023)
Abstract Background The functional results of total elbow arthroplasty (TEA) are controversial and the medium- to long-term revision rates are relatively high. The aim of the present study was to analyze the stresses of TEA in its classic c...
DOAJ
Open Access (DOAJ)
DOI: 10.1186/s10195-023-00690-x
A. A. Lunev • Вестник СибАДИ
(2019)
Introduction. The use of the thermal power station’s (TPS) waste in the construction industry becomes the norm in world practice of recent decades. Basically, the researches use ash and slag in the construction of automobile roads as a mate...
DOAJ
Open Access (DOAJ)
DOI: 10.26518/2071-7296-2019-6-746-757
Divya Nimma, Okram Ricky Devi, Bibek Laishram, Janjhyam Venkata Naga Ramesh et al. • Desalination and Water Treatment
(2025)
Global warming is a phenomenon whereby the planet's exposure to the sun's radiation worsens from the high emission of gasses believed to trap heat within the atmosphere. Carbon dioxide (CO2) is the leading greenhouse gas majorly responsible...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.dwt.2024.100889
Tortorella S, Vetri Buratti V, Maturi M, Sambri L et al. • International Journal of Nanomedicine
(2020)
Silvia Tortorella, Veronica Vetri Buratti, Mirko Maturi, Letizia Sambri, Mauro Comes Franchini, Erica Locatelli Department of Industrial Chemistry “Toso Montanari”, Alma Mater Studiorum – University of Bologna, Bologna 401...
DOAJ
Open Access (DOAJ)
Xiaofeng Xu, Weipeng Yu, Xingduo Fan, Zhenhong Gong et al. • Scientific Reports
(2025)
Abstract Currently, bamboo fibers (BFs) are commonly processed through alkali boiling softening pretreatment, which generates wastewater that poses environmental pollution risks. This process is also complex and requires significant human a...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41598-025-88059-4
Ayenew Amare, Mezigebu Belay, Zewudu Wondimagegn • Journal of Materials Science: Materials in Engineering
(2026)
Abstract The use of aluminium matrix composites (AMCs) in advanced engineering applications has increased due to their improved mechanical properties, such as hardness, ultimate tensile strength, toughness, wear, and corrosion resistance. A...
DOAJ
Open Access (DOAJ)
DOI: 10.1186/s40712-026-00421-0
Zhaokun Zhou, Helen Miller, Adam J.M. Wollman, Mark C. Leake • Photonics
(2015)
We present a novel experimental setup in which magnetic and optical tweezers are combined for torque and force transduction onto single filamentous molecules in a transverse configuration to allow simultaneous mechanical measurement and man...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/photonics2030758
Ruibang Wu, Leizhen Huang, Qinghong Xia, Zheng Liu et al. • Materials Today Bio
(2023)
Intervertebral disc degeneration (IDD) is a major contributing factor to both lower back and neck pain. As IDD progresses, the intervertebral disc (IVD) loses its ability to maintain its disc height when subjected to axial loading. This fai...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.mtbio.2023.100731
Denis A Romanov • Materials Research Express
(2020)
This article describes increasing wear resistance of 5CrNiMo die steel by more than 5 times. This effect is achieved by creating TiC-Ti-Al and TiB _2 -Ti-Al coatings on the surface of 5CrNiMo die steel. The microhardness of the formed coati...
DOAJ
Open Access (DOAJ)
DOI: 10.1088/2053-1591/ab86f6
Zahra Abdelmalek, M. Zubair Akbar Qureshi, S. Bilal, Qadeer Raza et al. • Case Studies in Thermal Engineering
(2021)
The consolidation power of different nanomaterials such as metallic nanoparticles and metallic-oxides nanoparticles in a new-fangled and energetic hybrid material should give rise to fascinating properties that combine the advantages of eac...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.csite.2020.100744
Juliana Zottis, Carla Adriana Theis Soares Diehl, Alexandre da Silva Rocha • Journal of Materials Research and Technology
(2018)
The purpose of this paper is to investigate the correlation of strain and hardness parameters in a drawing process chain of an SAE 1045 steel bar. The present work discusses the application of the experimental and numerical method of analys...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2018.01.004