Reset
Showing 20 of 165 academic articles

TEMPERATURE OF SLIDING SURFACES OF INTERNAL COMBUSION ENGINES BY THE TEMPER COLORS OF WEAR PARTICLES

M. G. El-Sherbiny, Farouk Hammad, M. M. Youssef, M. K. Mohamed et al. • Journal of the Egyptian Society of Tribology (2026)

The present study examines the temper colors of the wear particles retained by the oil filter by optical microscope. The temperature of the sliding surfaces inside engines can be determined by the temper colors of the wear particles. Becaus...

DOAJ Open Access (DOAJ) DOI: 10.21608/jest.2026.481011.1158

Properties of 3D Double-Arrow Negative Poisson’s Ratio Lattice Structure under Quasi-Static Compression and Low-Speed Impact

Fuzhen Sun, Meng Liu, Baoming Wang, Na Yang et al. • Advances in Materials Science and Engineering (2022)

Structures with negative Poisson’s ratios have wide applications in automotive design, owing to their excellent mechanical properties and good energy absorption capability. This type of structure can be used to design lightweight components...

DOAJ Open Access (DOAJ) DOI: 10.1155/2022/3726964

Design, manufacturing, and performance evaluation of heat pipe with three-segmented composite wick structure

Jiu Yu, Yubo Hu, Yaoxing Peng • Case Studies in Thermal Engineering (2026)

The wick structure functions as a core component for heat pipe (HP) and stands as one of the critical factors that dictate the performance of HP. Consequently, this paper puts forward an three-segmented composite wick structure, which is ma...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.csite.2026.107724

Investigation of the Friction Performance of G3000 (Variant), GG20, and GG15 (High Carbon) Cast Brake Discs Using the SAE J2522 Procedure

Talha İkbal Çığır, Melih Hakan Samur, Mevlüt Yasin Igdeli • International Journal of Automotive Science and Technology (2025)

This study compares the friction performance of three commonly used cast brake disc materials in the automotive industry: the G3000 variant, GG20, and GG15 (high carbon content). Samples were tested on an inertia dynamometer following the S...

DOAJ Open Access (DOAJ) DOI: 10.30939/ijastech..1811564

Enhanced Absorption with Graphene-Coated Silicon Carbide Nanowires for Mid-Infrared Nanophotonics

Patrick Rufangura, Iryna Khodasevych, Arti Agrawal, Matteo Bosi et al. • Nanomaterials (2021)

The mid-infrared (MIR) is an exciting spectral range that also hosts useful molecular vibrational fingerprints. There is a growing interest in nanophotonics operating in this spectral range, and recent advances in plasmonic research are aim...

DOAJ Open Access (DOAJ) DOI: 10.3390/nano11092339

Compression and Tensile Testing of L-PBF Ti-6Al-4V Lattice Structures with Biomimetic Porosities and Strut Geometries for Orthopedic Implants

Dimitri P. Papazoglou, Amy T. Neidhard-Doll, Margaret F. Pinnell, Dathan S. Erdahl et al. • Metals (2024)

In an effort to contribute to the ongoing development of ASTM standards for additively manufactured metal lattice specimens, particularly within the field of medicine, the compressive and tensile mechanical properties of biomimetic lattice ...

DOAJ Open Access (DOAJ) DOI: 10.3390/met14020232

Attitude Control of a Vehicle with Active Airfoil and Suspension Systems Using Integral Action for Body Angle and Tire Deflection

Syed Babar Abbas, Iljoong Youn • Actuators (2026)

This paper presents a novel approach to design an attitude motion control strategy of a vehicle to mitigate lateral or longitudinal inertial forces acting on the passenger during cornering, braking, and acceleration maneuvers. The collabora...

DOAJ Open Access (DOAJ) DOI: 10.3390/act15060317

Intense laser interaction with micro-bars

Michal Elkind, Itamar Cohen, David Blackman, Talia Meir et al. • Scientific Reports (2023)

Abstract Intense laser fields interact very differently with micrometric rough surfaces than with flat objects. The interaction features high laser energy absorption and increased emission of MeV electrons, ions, and of hard x-rays. In this...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-023-48866-z

In-Situ Monitoring and Prediction of Frost Growth on Plant Leaves Based on Dielectric Spectrum Analysis and an SWT-SSA-LSTM Model

Huan Song, Lijun Wang, Yuguo Gao, Shuman Guo et al. • AgriEngineering (2026)

Accurate and in-situ monitoring of frost growth on plant leaves is crucial for disaster prevention in smart agriculture. To address the limitations of traditional methods in quantification and continuity, this study proposes a novel monitor...

DOAJ Open Access (DOAJ) DOI: 10.3390/agriengineering8020067

Adaptive Tracking Control of Anchoring Unit for Pipeline Intelligent Plugging Robot Based on Improved Deep Deterministic Policy Gradient

Tingting Wu, Yaxin Liu, Laihe Qi, Pu Wang et al. • Machines (2026)

A pipeline intelligent plugging robot (PIPR) is an important tool in subsea pipeline maintenance and emergency repair. Precise position-tracking control is crucial for the in-pipe plugging operation of a PIPR. The anchoring module is the ke...

DOAJ Open Access (DOAJ) DOI: 10.3390/machines14060675

Review of Supramolecular Oleogel Lubricants

Lei Wei, Minghui Xiong, Haoye Wang, Yuelin Chen et al. • Gels (2026)

Supramolecular oleogel lubricants construct a three-dimensional network structure within base oils through gelator-mediated non-covalent interactions, such as hydrogen bonding, van der Waals forces, and π–π stacking. These materials demonst...

DOAJ Open Access (DOAJ) DOI: 10.3390/gels12040338

Fumaric acid regulates morphine tolerance in bone cancer pain through spinal MrgC receptor modulation

Sijie Liu, Minghao Tang, Jing Zhao, Lulu Zhang et al. • Pakistan Journal of Pharmaceutical Sciences (2026)

Background: Bone cancer pain (BCP) represents a debilitating complication that profoundly impacts patient quality of life and predisposes to psychological comorbidities, including depression and anxiety. Objectives: To investigate the effec...

DOAJ Open Access (DOAJ) DOI: 10.36721/PJPS.2026.39.8.233.1

Developing an Interferogram-Based Module with Machine Learning for Maintaining Leveling of Glass Substrates

Syuan-Cheng Chang, Chung-Ping Chang, Yung-Cheng Wang, Chi-Chieh Chu • Machines (2023)

In this research, we propose a method that utilizes machine learning to maintain the parallelism of the resonant cavity in a Fabry–Perot interferometer designed specifically for glass substrates. Based on the optical principle and theory, w...

DOAJ Open Access (DOAJ) DOI: 10.3390/machines11060668

Implementing an Adaptive Thrust Distribution Algorithm on the Robust Control System for Serial Split-Hull Underwater Vehicles

Vishakh S. Kumar, Prabhu Rajagopal • IEEE Access (2022)

This paper discusses designing and implementing an adaptive thrust distribution algorithm on the already robust control system for serial split-hull underwater vehicles to maximise operational efficiency. Split-hull underwater vehicles are ...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2022.3223118

Impact of a Nursing Strategy for Mechanical Ventilation Liberation on Patients' Outcomes

Manal Mohamed Ahmed Ayed, Nagwa Ibrahim Abbas Ghoneim, Fatma Shoeib Ali Abd Elraheim, Hala A. Abdelrahman • Egyptian Journal of Health Care (2025)

Background:  Successful liberation from mechanical ventilation is a critical milestone in intensive care, facilitating patient recovery and reducing the risk of ventilator-associated complications. Optimizing this process requires structure...

DOAJ Open Access (DOAJ) DOI: 10.21608/ejhc.2025.417302