Reset
Showing 20 of 180 academic articles

A study on the Joule-Thomson effect of during filling hydrogen in high pressure tank

Ji-Qiang Li, Yan Chen, Yong Biao Ma, Jeong-Tae Kwon et al. • Case Studies in Thermal Engineering (2023)

With the development of the hydrogen fuel cell automobile industry, higher requirements are put forward for the construction of hydrogen energy infrastructure, the matching of parameters and the control strategy of hydrogen filling rate in ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.csite.2022.102678

Securing Electric Vehicle Performance: Machine Learning-Driven Fault Detection and Classification

Mahbub Ul Islam Khan, Md. Ilius Hasan Pathan, Mohammad Mominur Rahman, Md. Maidul Islam et al. • IEEE Access (2024)

Electric vehicles (EVs) are commonly recognized as environmentally friendly modes of transportation. They function by converting electrical energy into mechanical energy using different types of motors, which aligns with the sustainable pri...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2024.3400913

Mechanism analysis of mechanical extraction of Pleioblastus amarus fibers by saturated steam pretreatment

Xiaofeng Xu, Weipeng Yu, Xingduo Fan, Zhenhong Gong et al. • Scientific Reports (2025)

Abstract Currently, bamboo fibers (BFs) are commonly processed through alkali boiling softening pretreatment, which generates wastewater that poses environmental pollution risks. This process is also complex and requires significant human a...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-025-88059-4

Investigating the cost of mechanized unpaved road maintenance operations in Uganda

Andrew Moses Obeti, Lawrence Muhwezi, John Muhumuza Kakitahi, Chris Bic Byaruhanga • Transportation Research Interdisciplinary Perspectives (2024)

Force Account Mechanism (FAM) is the predominant road maintenance system in Uganda’s local government setup and a similar, though slightly different approach, is used in some large private sector agriculture plantations. With the Uganda Roa...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.trip.2024.101135

Development of functional cookies form wheat-pumpkin seed based composite flour

Feriehiwote Weldeyohanis Gebremariam, Eneyew Tadesse Melaku, Venkatesa Prabhu Sundramurthy, Henock Woldemichael Woldemariam • Heliyon (2024)

To develop high quality cookies, even seemingly smallest changes depended on factors that can affect taste, texture, and nutritional value. In this light, this study aimed to investigate the upshot of refined wheat flour and pumpkin seed fl...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.heliyon.2024.e24443

Enhancing Rosemary (<i>Rosmarinus officinalis</i>, L.) Growth and Volatile Oil Constituents Grown under Soil Salinity Stress by Some Amino Acids

Ahmad H. Al-Fraihat, Sati Y. Al-Dalain, Ahmad A. Zatimeh, Moawiya A. Haddad • Horticulturae (2023)

The current study was carried out during the two consecutive winter seasons of 2019/2020 and 2020/2021 at the Experimental Farm of Ash-Shoubak University College, Jordan, as a pot experiment. This experiment was planned to evaluate the impa...

DOAJ Open Access (DOAJ) DOI: 10.3390/horticulturae9020252

Silicon reduces nitrogen stress and improves growth and yield of forage grass under excessive fertilization in tropical soils

Cíntia Cármen de Faria Melo, Danilo Silva Amaral, Renato de Mello Prado, Anderson de Moura Zanine et al. • Scientific Reports (2025)

Abstract Inadequate nitrogen (N) fertilization management in pastures is common and can lead to N deficiency or excess, resulting in physiological imbalances in forage grasses across different regions of the world. Silicon (Si) fertigation ...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-025-03551-1

Remaining Useful Life Prediction for Nonlinear Degraded Equipment With Bivariate Time Scales

Hong Pei, Changhua Hu, Xiaosheng Si, Jianfei Zheng et al. • IEEE Access (2019)

As the fundamental and prerequisite work of remaining useful life (RUL) prediction, degradation modeling directly affects the accuracy of RUL prediction. Existing degradation models are all developed under a single time scale, and less rese...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2019.2951804

Reducing Torque Ripple Through Innovative Configuration of Permanent Magnet Based on Air Gap Field Modulation Theory in a Novel Axial Flux Reversal Permanent Magnet Machine

Jilong Zhao, Qing Wang, Qingfeng Han • IEEE Access (2024)

In this paper, a novel axial flux reversal permanent magnet (PM) (AFRPM) machine, which combines the merit of the axial flux PM (AFPM) machine and flux reversal PM machine, is proposed. Meanwhile, according to the characteristics of the mac...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2024.3389699

Identification and evaluation of the effective criteria for detection of congestion in a smart city

Anita Mohanty, Subrat Kumar Mohanty, Bhagyalaxmi Jena, Ambarish G. Mohapatra et al. • IET Communications (2022)

Abstract The delay in transportation of necessary items is due to traffic congestion throughout the world. This is a serious phenomenon which results in waste of time and fuel. The detection of road conditions and dissemination of traffic i...

DOAJ Open Access (DOAJ) DOI: 10.1049/cmu2.12344

Evaluation of experimentally observed asymmetric distributions of hardness, strain and residual stress in cold drawn bars by FEM-simulation

Juliana Zottis, Carla Adriana Theis Soares Diehl, Alexandre da Silva Rocha • Journal of Materials Research and Technology (2018)

The purpose of this paper is to investigate the correlation of strain and hardness parameters in a drawing process chain of an SAE 1045 steel bar. The present work discusses the application of the experimental and numerical method of analys...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2018.01.004

Development, modelling and optimization of process parameters on the tensile strength of aluminum, reinforced with pumice and carbonated coal hybrid composites for brake disc application

Tanimu Kogi Ibrahim, Danjuma Saleh Yawas, Julius Thaddaeus, Bashar Danasabe et al. • Scientific Reports (2024)

Abstract This study focuses on optimizing double stir casting process parameters to enhance the tensile strength of hybrid composites comprising aluminum alloy, brown pumice, and coal ash, intended for brake disc applications. Analytical te...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-024-67476-x

Response of Phytoplankton Assemblages From Naturally Acidic Coastal Ecosystems to Elevated pCO2

Natalia Osma, Natalia Osma, Laura Latorre-Melín, Bárbara Jacob et al. • Frontiers in Marine Science (2020)

The interplay of coastal oceanographic processes usually results in partial pressures of CO2 (pCO2) higher than expected from the equilibrium with the atmosphere and even higher than those expected by the end of the century. Although this i...

DOAJ Open Access (DOAJ) DOI: 10.3389/fmars.2020.00323

Influence of Radar Parameters and Sea State on Wind Wave-Induced Velocity in C-Band ATI SAR Ocean Surface Currents

Rui Zhang, Jie Zhang, Xi Zhang, Chenghui Cao et al. • Remote Sensing (2022)

Wind wave-induced artifact surface velocity (WASV) is an important component of the sea surface motions detected by synthetic aperture radar (SAR) systems. Understanding the characteristics of the interference of WASV on SAR current velocit...

DOAJ Open Access (DOAJ) DOI: 10.3390/rs14174135

Tribological and flexural characterization of dissimilar AA2024-T3/AA6082-T6 friction stir welded joints

Paritosh Mishra, Brijesh Prasad, Sunil Chamoli, Ibrahim M. Alarifi • Journal of Materials Research and Technology (2026)

The escalating demand for lightweight, high-strength structures in the aerospace and automotive sectors necessitates robust joining technologies for dissimilar aluminium alloys. This study systematically investigates the effects of friction...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2026.08.256