Reset
Showing 20 of 983 academic articles

Cost effective reproduction number based strategies for reducing deaths from COVID-19

Christopher Thron, Vianney Mbazumutima, Luis V. Tamayo, Léonard Todjihounde • Journal of Mathematics in Industry (2021)

Abstract In epidemiology, the effective reproduction number R e $R_{e}$ is used to characterize the growth rate of an epidemic outbreak. If R e > 1 $R_{e} >1$ , the epidemic worsens, and if R e < 1 $R_{e}< 1$ , then it subsides and eventual...

DOAJ Open Access (DOAJ) DOI: 10.1186/s13362-021-00107-6

Enhancing vocational training in corrections: A type 1 hybrid randomized controlled trial protocol for evaluating virtual reality job interview training among returning citizens preparing for community re-entry

Matthew J. Smith, Jamie A. Mitchell, Shannon Blajeski, Brittani Parham et al. • Contemporary Clinical Trials Communications (2020)

The Michigan Department of Corrections operates the Vocational Villages, which are skilled trades training programs set within prisons that include an immersive educational community using virtual reality, robotics, and other technologies t...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.conctc.2020.100604

Decentralized Cooperative Localization Approach for Autonomous Multirobot Systems

Thumeera R. Wanasinghe, George K. I. Mann, Raymond G. Gosine • Journal of Robotics (2016)

This study proposes the use of a split covariance intersection algorithm (Split-CI) for decentralized multirobot cooperative localization. In the proposed method, each robot maintains a local cubature Kalman filter to estimate its own pose ...

DOAJ Open Access (DOAJ) DOI: 10.1155/2016/2560573

Exploring a Novel Material and Approach in 3D-Printed Wrist-Hand Orthoses

Diana Popescu, Mariana Cristiana Iacob, Cristian Tarbă, Dan Lăptoiu et al. • Journal of Manufacturing and Materials Processing (2024)

This article proposes the integration of two novel aspects into the production of 3D-printed customized wrist-hand orthoses. One aspect involves the material, particularly Colorfabb varioShore thermoplastic polyurethane (TPU) filament with ...

DOAJ Open Access (DOAJ) DOI: 10.3390/jmmp8010029

Recent advances in autonomous synthesis of materials

Yucen Li, Lingling Xia, Yiming Fan, Qinyue Wang et al. • ChemPhysMater (2022)

The synthesis of materials has been an important task throughout human history, and the ability to perform successful and efficient syntheses has been a factor in industrial revolutions and societal development. Recently, the rapid developm...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.chphma.2021.10.002

Efficient Edge-Based Image Interpolation Method Using Neighboring Slope Information

Sajid Khan, Dong-Ho Lee, Muhammad Asif Khan, Abdul Rehman Gilal et al. • IEEE Access (2019)

This paper presents an image interpolation method that provides superior performance with low complexity. Applying a simple linear method achieves time-efficient interpolation, but often produces artifacts; however, applying other complex m...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2019.2942004

Computation offloading and information freshness in edge-assisted networked robotic systems

Junyeong Jeon, Daniel Poul Mtowe, Dong Min Kim, Dong Min Kim • Frontiers in Robotics and AI (2026)

Camera-based wireless networked control systems must move visual information across a shared wireless link before a command can be applied, so the placement of the perception computation fixes both the communication load and the freshness o...

DOAJ Open Access (DOAJ) DOI: 10.3389/frobt.2026.1999591

Service Robots and Robotics

Marco Ceccarelli • IGI Global eBooks (2011)

Service robots serve a wide range of people in residential, commercial, industrial, military, and many more applied fields. Service Robots and Robotics: Design and Application offers the latest research within the field, combining a mixture...

OPENALEX DOI: https://doi.org/10.4018/978-1-4666-0291-5

An Optimization Model for Reliability Improvement and Cost Reduction Through EV Smart Charging

Jinping Zhao, Ali Arefi, Alberto Borghetti, Gerard Ledwich • Journal of Modern Power Systems and Clean Energy (2024)

There is a general concern that the increasing penetration of electric vehicles (EVs) will result in higher aging failure probability of equipment and reduced network reliability. The electricity costs may also increase, due to the exacerba...

DOAJ Open Access (DOAJ) DOI: 10.35833/MPCE.2022.000837

Robots in organizations

Bilge Mutlu, Jodi Forlizzi • ACM/IEEE International Conference on Human-Robot Interaction (HRI) (2008)

Robots are becoming increasingly integrated into the workplace, impacting organizational structures and processes, and affecting products and services created by these organizations. While robots promise significant benefits to organization...

OPENALEX DOI: https://doi.org/10.1145/1349822.1349860

Robots and Firms

Michael Koch, Ilya Manuylov, Marcel Smolka • The Economic Journal (2021)

Abstract We study the microeconomic implications of robot adoption using a rich panel data set of Spanish manufacturing firms over a 27-year period (1990–2016). We provide causal evidence on two central questions: (1) Which firm characteris...

OPENALEX Open Access DOI: https://doi.org/10.1093/ej/ueab009

Snail-inspired water-enhanced soft sliding suction for climbing robots

Tianqi Yue, Hermes Bloomfield-Gadêlha, Jonathan Rossiter • Nature Communications (2024)

Abstract Snails can stably slide across a surface with only a single high-payload sucker, offering an efficient adhesive locomotion mechanism for next-generation climbing robots. The critical factor for snails’ sliding suction behaviour is ...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41467-024-48293-2

Robotic Surgery

Anthony R. Lanfranco, Andres E. Castellanos, Jaydev P. Desai, William C. Meyers • Annals of Surgery (2003)

In Brief Objective: To review the history, development, and current applications of robotics in surgery. Background: Surgical robotics is a new technology that holds significant promise. Robotic surgery is often heralded as the new revoluti...

OPENALEX Open Access DOI: https://doi.org/10.1097/01.sla.0000103020.19595.7d PMC: 1356187

An inexact multiple-recourse hybrid-fuel management model with considering carbon reduction requirement for a biofuel-penetrated heating system

D.Z. Fu, T.J. Yang, Y.J. Pan, Y.M. Tong • Energy Reports (2023)

In China’s goal of reaching carbon neutrality by 2060, the blending-biofuel-based heating technique is being used to reduce CO2 and air-pollutant emissions in existing district heating systems in northern China. This brings a series of new ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.egyr.2023.03.081

4D printing of semi-crystalline crosslinked polymer networks with two-way shape-memory effect

Lorenzo Bonetti, Daniele Natali, Stefano Pandini, Massimo Messori et al. • Materials & Design (2024)

This paper introduces a novel approach to 4D printing tailored structures with reversible two-way shape-memory effect (SME) through material extrusion technology. To this aim, methacrylated poly(ε-caprolactone) (PCL) was synthesized and eva...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.matdes.2024.112725

Improvement of Cycling Stability of Core–Shell Structured Ni-Rich NMC Cathodes by Using a Tungsten Oxide Stabilization Interlayer

Bilal Tasdemir, Svitlana Krüger, Pinank Sohagiya, Apurba Ray et al. • Batteries (2026)

The growing demand for higher-energy lithium-ion batteries, encompassing consumer electronics, stationary grid storage, and electric mobility to specialized sectors like aerospace, medical devices, and industrial robotics, requires cathode ...

DOAJ Open Access (DOAJ) DOI: 10.3390/batteries12030082