Reset
Showing 20 of 1,569 academic articles

Smart integrated nanosystems for biomedical applications:critical issues and perspectives

Domenico Lombardo, Luigi Pasqua, Mikhail A. Kiselev • Atti della Accademia Peloritana dei Pericolanti : Classe di Scienze Fisiche, Matematiche e Naturali (2019)

During the last decades the progresses of nanoscience and nanotechnology for biomedical application stimulated the transition from traditional drug delivery systems to the development of smart integrated nanosystems with stimuli-responsive ...

DOAJ Open Access (DOAJ) DOI: 10.1478/AAPP.97S2A14

A case study on morphological aspects of distinct magnetized 3D hybrid nanoparticles on fluid flow between two orthogonal rotating disks: An application of thermal energy systems

Zahra Abdelmalek, M. Zubair Akbar Qureshi, S. Bilal, Qadeer Raza et al. • Case Studies in Thermal Engineering (2021)

The consolidation power of different nanomaterials such as metallic nanoparticles and metallic-oxides nanoparticles in a new-fangled and energetic hybrid material should give rise to fascinating properties that combine the advantages of eac...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.csite.2020.100744

Impact of micromechanical properties of organic matter on the micro-mesopore structures of the over-mature shale in the Niutitang Formation

Hang Lei, Wenjibin Sun, Yujun Zuo, Zhonghu Wu et al. • Scientific Reports (2025)

Abstract The micromechanical properties of organic matter (OM) and organic pore structures in the over-mature stage are crucial for determining shale reservoir quality and assessing shale gas resource potential. However, there is still deba...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-025-89164-0

Stability Mechanism and Repair Method of U-Shaped Steel Reverse Arch Support in Soft Floor Roadway

Chao Wang, Xiaoyi Chen, Jiandong Zhang, Yongping Wu • Advances in Civil Engineering (2020)

This paper is aimed at the inverted arch support instability of track roadway with mining level +1100 m in Liuyuanzi Coal Mine. By means of field investigation, theoretical analysis, numerical calculation, and engineering practice, the inst...

DOAJ Open Access (DOAJ) DOI: 10.1155/2020/8814365

A Comprehensive Mathematical Model of Electroslag Remelting with Two Series-Connected Electrodes Based on Sequential Coupling Simulation Method

Wenjie Tong, Wanming Li, Ximin Zang, Huabing Li et al. • Metals (2020)

A comprehensive mathematical model of electroslag remelting with two series-connected electrodes (TSCE-ESR) was constructed based on sequential coupling method. The influence of droplet effect on electroslag remelting process (ESR) was cons...

DOAJ Open Access (DOAJ) DOI: 10.3390/met10050658

Composition and distribution of bacterial communities and potential radiation-resistant bacteria at different elevations in the eastern Pamirs

Jing Zhu, Hui-Nan Wang, Qi-Yong Tang, Mei-Ying Gu et al. • Frontiers in Microbiology (2024)

Altitude and ultraviolet (UV) radiation may affect the community composition and distribution of microorganisms in soil ecosystems. In this study, 49 soil samples from 10 locations were collected from different elevations on the eastern Pam...

DOAJ Open Access (DOAJ) DOI: 10.3389/fmicb.2024.1427806

Bacteriophage: A Useful Tool for Studying Gut Bacteria Function of Housefly Larvae, Musca domestica

Xinyu Zhang, Shumin Wang, Ting Li, Qian Zhang et al. • Microbiology Spectrum (2021)

ABSTRACT Beneficial symbiotic bacteria have positive effects on some insects’ (such as mosquitoes, cockroaches, and flies) biological activities. However, the effects of a lack of one specific symbiotic bacterium on the life activities of s...

DOAJ Open Access (DOAJ) DOI: 10.1128/Spectrum.00599-21

Purification of Murine Gammaherpesvirus 68 With Use of Differential Centrifugation

Hodoši R., Nováková E., Šupolíková M. • European Pharmaceutical Journal (2021)

The method for separation of viral particles in a concentrated form from the environment is called virus purification. Viruses are required to be purified for a range of studies in which it is necessary to distinguish the properties or stru...

DOAJ Open Access (DOAJ) DOI: 10.2478/afpuc-2021-0009

Incubation of semen with human follicular fluid improves the antioxidant status and quality of spermatozoa after freezing–thawing

Monireh Mahmoodi, Elham Shojafar, Maryam Dastjani-Farahani • Reproduction and Fertility (2025)

The sperm freezing–thawing procedure is the most commonly used technique in clinics to preserve male fertility before any pathological destruction of the testis. Therefore, most studies are currently focused on optimizing this method to ach...

DOAJ Open Access (DOAJ) DOI: 10.1530/RAF-24-0056

Anti-Bacterial Microgel Synthesis: Sonochemical Modification of Carbopol for Hygienic Applications

Aghil Asadi, Mohsen Najafi, Hossien Bouhnedi, Mehdi Haji Bagherian • علوم و تکنولوژی پلیمر (2021)

Hypothesis: The volume of studies conducted on biopolymeric materials emphasizes the high-consumption of polymers in biomaterial fields, especially in cosmetics industry which must be resistant to different kinds of microorganisms and bacte...

DOAJ Open Access (DOAJ) DOI: 10.22063/jipst.2021.1779

A Dynamic Discriminative Canonical Correlation Analysis via Adaptive Weight Scheme

Shuzhi Su, Penglian Gao, Yanmin Zhu, Xingzhu Liang et al. • IEEE Access (2021)

In multi-view learning, massive literature is devoted to exploring the intrinsic structure between cross-views. It is well known that canonical correlation analysis (CCA) is a conventional multi-view learning method, which considers the cor...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2021.3118023

An object-oriented design method to implement the mechatronic system control by using hybrid automata and real-time UML

Vu Duy Quang, Ngo Van Hien • Vietnam Journal of Mechanics (2011)

In this paper, we present a method, which is based on hybrid automata and Real-Time Unified Modeling Language (UML) to analyze and design the control parts of mechatronic systems with input or output events and signals in order to effective...

DOAJ Open Access (DOAJ) DOI: 10.15625/0866-7136/33/3/211

Exploring fibre addition methods and mechanical properties of fibre-reinforced 3D printed concrete: A review

Syed Bustan Fatima Warsi, Biranchi Panda, Pankaj Biswas • Developments in the Built Environment (2023)

3D Concrete Printing (3DCP) is a growing field of sustainable technology that offers an avenue for rapid industrialisation of the construction industry. Over the years, many non-structural elements have been fabricated by 3D printing, thus ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.dibe.2023.100295

Consumers' Perception of Urban Farming—An Exploratory Study

Carola Grebitus, Lauren Chenarides, Rebecca Muenich, Alex Mahalov • Frontiers in Sustainable Food Systems (2020)

Urban agriculture offers the opportunity to provide fresh, local food to urban communities. However, urban agriculture can only be successfully embedded in urban areas if consumers perceive urban farming positively and accept urban farms in...

DOAJ Open Access (DOAJ) DOI: 10.3389/fsufs.2020.00079

High Dimensional QSAR Study of Mild Steel Corrosion Inhibition in acidic medium by Furan Derivatives

Abdo M. Al-Fakih, Madzlan Aziz, Hassan H. Abdallah, Zakariya Y. Algamal et al. • International Journal of Electrochemical Science (2015)

The inhibition of mild steel corrosion in 1 M HCl by 17 furan derivatives was investigated experimentally using potentiodynamic polarization measurements. The furan derivatives inhibit the mild steel corrosion. The experimental inhibition e...

DOAJ Open Access (DOAJ) DOI: 10.1016/S1452-3981(23)06562-8