Reset
Showing 20 of 87 academic articles

Modeling the Dynamics of Two Cooperating Robots

Andrzej Burghardt, Wincenty Skwarek • Applied Sciences (2021)

The paper presents a description of the dynamics of two mobile robots cooperating in the transport of a bulky load in the form of a beam. The purpose of modeling such a system was to obtain a mathematical model in an appropriate form. Lagra...

DOAJ Open Access (DOAJ) DOI: 10.3390/app11136019

Optimizing Post-Curing Protocols for 3D-Printed Dental Models: A Long-Term Evaluation of Mechanical and Physical Properties

Irina Besliu Bancescu, Roxana Gheorghita, Alexandru Nemtoi • Engineering Proceedings (2026)

This study evaluated the influence of post-polymerization duration and a 14-day aging period on the mechanical and physical properties of 3D-printed standard resin models. Methods: Specimens were printed using Anycubic resin (50 µm layers) ...

DOAJ Open Access (DOAJ) DOI: 10.3390/engproc2026148002

Particle filters in robotics

Sebastian Thrun (2002)

In recent years, particle filters have solved several hard perceptual problems in robotics. Early successes of particle filters were limited to low-dimensional estimation problems, such as the problem of robot localization in environments w...

OPENALEX

A recent update on development, synthesis methods, properties and application of natural products derived carbon dots

Soumitra Sahana, Anupam Gautam, Rajveer Singh, Shivani Chandel • Natural Products and Bioprospecting (2023)

Abstract Natural resources are practically infinitely abundant in nature, which stimulates scientists to create new materials with inventive uses and minimal environmental impact. Due to the various benefits of natural carbon dots (NCDs) fr...

DOAJ Open Access (DOAJ) DOI: 10.1007/s13659-023-00415-x

Exploring Ru 4d oxide Ba2XRuO6 (X = Y, Lu, Sc) for spintronics: pressure-dependent first-principles study

Razia Abdul Majid Qureshi, Altaf Ur Rahman, Altaf Ur Rahman, Muhammad Sajjad et al. • Frontiers in Chemistry (2026)

Recent advances in the precise control of electromagnetic and transport properties, and the miniaturization of electronic devices, have introduced new prospects in the development of practical quantum computing. Double perovskites have gain...

DOAJ Open Access (DOAJ) DOI: 10.3389/fchem.2026.1814481

Optimal Control of Spatially Distributed Systems

Nader Motee, Ali Jadbabaie • IEEE Transactions on Automatic Control (2008)

In this paper, we study the structural properties of optimal control of spatially distributed systems. Such systems consist of an infinite collection of possibly heterogeneous linear control systems that are spatially interconnected via cer...

OPENALEX DOI: https://doi.org/10.1109/tac.2008.929366

Advances and perspectives for receiver function imaging of the Earth's internal discontinuities and velocity structures

Ling Chen, Xu Wang, Xin Wang, Zigen Wei et al. • 地球与行星物理论评 (2022)

Studying the structures, properties and origins of the Earth's internal discontinuities is an important part in the efforts to understand the physical and chemical properties of the layered Earth, as well as to explore the dynamic processes...

DOAJ Open Access (DOAJ) DOI: 10.19975/j.dqyxx.2022-029

Sustainable clove-derived nitrogen-doped carbon dots with programmable multimodal fluorescence for metal ion and fluoride sensing

Mallika Phull, Mandeep Kaur, Yashika Singla, Urvashi Singh et al. • RSC Advances (2026)

The development of sustainable fluorescent nanomaterials from renewable biomass represents a promising strategy for environmentally benign chemical sensing. In this work, nitrogen-doped carbon dots (N-CDs) were synthesized from clove biomas...

DOAJ Open Access (DOAJ) DOI: 10.1039/d6ra05591e

Tailoring structural properties of carbon via implanting optimal co nanoparticles in n‐rich carbon cages toward high‐efficiency oxygen electrocatalysis for rechargeable zn‐air batteries

Jie Yu, Yawen Dai, Zhenbao Zhang, Tong Liu et al. • Carbon Energy (2022)

Abstract Rational construction of carbon‐based materials with high‐efficiency bifunctionality and low cost as the substitute of precious metal catalyst shows a highly practical value for rechargeable Zn‐air batteries (ZABs) yet it still rem...

DOAJ Open Access (DOAJ) DOI: 10.1002/cey2.171

Glycosylation of Epigallocatechin Gallate by Engineered Glycoside Hydrolases from <i>Talaromyces amestolkiae</i>: Potential Antiproliferative and Neuroprotective Effect of These Molecules

Juan A. Méndez-Líter, Ana Pozo-Rodríguez, Enrique Madruga, María Rubert et al. • Antioxidants (2022)

Glycoside hydrolases (GHs) are enzymes that hydrolyze glycosidic bonds, but some of them can also catalyze the synthesis of glycosides by transglycosylation. However, the yields of this reaction are generally low since the glycosides formed...

DOAJ Open Access (DOAJ) DOI: 10.3390/antiox11071325

Elastic modulus of β-Ga2O3 nanowires measured by resonance and three-point bending techniques

Annamarija Trausa, Sven Oras, Sergei Vlassov, Mikk Antsov et al. • Beilstein Journal of Nanotechnology (2024)

Due to the recent interest in ultrawide bandgap β-Ga2O3 thin films and nanostructures for various electronics and UV device applications, it is important to understand the mechanical properties of Ga2O3 nanowires (NWs). In this work, we inv...

DOAJ Open Access (DOAJ) DOI: 10.3762/bjnano.15.58

A DFT Study on the Electronic Structures and Conducting Properties of Rubrene and its Derivatives in Organic Field-Effect Transistors

Huipeng Ma, Na Liu, Jin-Dou Huang • Scientific Reports (2017)

Abstract We systematically studied the electronic structures and conducting properties of rubrene and its derivatives reported recently, and disscussed the influences of electron-withdrawing groups and chemical oxidation on the reorganizati...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-017-00410-6

Improvement in energy absorption properties of aluminum foams by designing pore-density distribution

Fateme Hassanli, Mohammad Hossein Paydar • Journal of Materials Research and Technology (2021)

In the present work, effect of structural design on the mechanical properties of aluminum foams was studied. Aluminum foams with a relative density in the range of 0.28–0.48 with uniform and graded pore frequency were fabricated through pow...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2021.06.073

Graph neural networks for materials science and chemistry

Patrick Reiser, Marlen Neubert, André Eberhard, Luca Torresi et al. • Communications Materials (2022)

Machine learning plays an increasingly important role in many areas of chemistry and materials science, being used to predict materials properties, accelerate simulations, design new structures, and predict synthesis routes of new materials...

OPENALEX cc-by DOI: https://doi.org/10.1038/s43246-022-00315-6 PMC: 9702700

Cross-Correlation-Based Structural System Identification Using Unmanned Aerial Vehicles

Hyungchul Yoon, Vedhus Hoskere, Jong-Woong Park, Billie F. Spencer • Sensors (2017)

Computer vision techniques have been employed to characterize dynamic properties of structures, as well as to capture structural motion for system identification purposes. All of these methods leverage image-processing techniques using a st...

DOAJ Open Access (DOAJ) DOI: 10.3390/s17092075

Unmanned Aerial Vehicle-Based Structural Health Monitoring and Computer Vision-Aided Procedure for Seismic Safety Measures of Linear Infrastructures

Luna Ngeljaratan, Elif Ecem Bas, Mohamed A. Moustafa • Sensors (2024)

Computer vision in the structural health monitoring (SHM) field has become popular, especially for processing unmanned aerial vehicle (UAV) data, but still has limitations both in experimental testing and in practical applications. Prior wo...

DOAJ Open Access (DOAJ) DOI: 10.3390/s24051450