Home »
Academic Articles & Research Papers
Showing 20 of 161 academic articles
Isabel Pombo Cardoso • Conservar Património
(2019)
This paper is the fifth of a series and focuses on tracing the history of the use of gypsum based products as well as of the use of ground layers, centred on a review of published analytical evidence. The purpose is to contribute for the un...
DOAJ
Open Access (DOAJ)
DOI: 10.14568/cp2018033
Matthew Dvorsky, Daniela Munalli, Mohammad Tayeb Al Qaseer, Reza Zoughi • IEEE Open Journal of Instrumentation and Measurement
(2022)
In this paper synthetic aperture radar (SAR) polarimetry techniques are applied to detect and characterize fiber misalignment in both carbon fiber sheets and glass fiber reinforced polymer (GFRP) composites. The principle behind SAR polarim...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/OJIM.2022.3184347
CHEN Qiang, LI Shun, ZHU Li'an, BAI Shuxin et al. • Cailiao gongcheng
(2023)
As one kind of advanced high temperature structural and functional materials, it is necessary for fiber reinforced silicon carbide matrix composites (SiC CMCs) in the field of thermal management (TM) to combine the efficient heat transfer a...
DOAJ
Open Access (DOAJ)
DOI: 10.11868/j.issn.1001-4381.2023.000079
Aliakbar Salaripour, Arman Hamidi, Alieh Faridi Foshtomi,, Amir Hosein Nourbakhsh • برنامهریزی توسعه شهری و منطقهای
(2024)
Nowadays, a significant aspect of citizens' environmental conduct is intertwined with their connection and emotional bond to the city. This attachment to the urban environment is regarded as a critical element in fostering environmentally c...
DOAJ
Open Access (DOAJ)
DOI: 10.22054/urdp.2024.76342.1597
Ali Raza, Khaled Mohamed Elhadi, Muhammad Abid, Ahmed Farouk Deifalla et al. • Heliyon
(2024)
Waste tyre rubber has become an environmental and health concern that needs to be sustainably managed to avoid fire hazards and save natural resources. This research work aims to study the structural behavior of glass fiber reinforced polym...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.heliyon.2024.e26222
Okello Ochieng Phillip, Tan Guirong, Ongoma Victor, Nyandega Isaiah • Geographica Pannonica
(2021)
Convectively coupled equatorial Kelvin waves (CCEKWs) are those types of equatorially trapped disturbances that propagate eastward and are among the most common intra-seasonal oscillations in the tropics. There exists two-way feedback betwe...
DOAJ
Open Access (DOAJ)
DOI: 10.5937/gp25-31132
Eun Kyoung Kim, Hong-Mi Choi, Jong-Hwan Lee, Dong Woo Han et al. • Frontiers in Cardiovascular Medicine
(2023)
BackgroundDue to increased needs to reduce non-fatal as well as fatal cardiac events, preoperative echocardiography remains part of routine clinical practice in many hospitals. Data on the role of preoperative echocardiography in low-risk n...
DOAJ
Open Access (DOAJ)
DOI: 10.3389/fcvm.2023.1088496
Ayenew Amare, Mezigebu Belay, Zewudu Wondimagegn • Journal of Materials Science: Materials in Engineering
(2026)
Abstract The use of aluminium matrix composites (AMCs) in advanced engineering applications has increased due to their improved mechanical properties, such as hardness, ultimate tensile strength, toughness, wear, and corrosion resistance. A...
DOAJ
Open Access (DOAJ)
DOI: 10.1186/s40712-026-00421-0
Li Xu, Peng Ran, Wenqian Zhou, Jingshu Wang et al. • Nature Communications
(2026)
Abstract Conventional X‑ray sensing fails in extreme temperatures due to a fundamental trilemma: no material offers strong absorption, flexibility, and thermal stability simultaneously. Rigid inorganic scintillators exhibit thermal quenchin...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41467-026-71103-w
Feriehiwote Weldeyohanis Gebremariam, Eneyew Tadesse Melaku, Venkatesa Prabhu Sundramurthy, Henock Woldemichael Woldemariam • Heliyon
(2024)
To develop high quality cookies, even seemingly smallest changes depended on factors that can affect taste, texture, and nutritional value. In this light, this study aimed to investigate the upshot of refined wheat flour and pumpkin seed fl...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.heliyon.2024.e24443
Ruibang Wu, Leizhen Huang, Qinghong Xia, Zheng Liu et al. • Materials Today Bio
(2023)
Intervertebral disc degeneration (IDD) is a major contributing factor to both lower back and neck pain. As IDD progresses, the intervertebral disc (IVD) loses its ability to maintain its disc height when subjected to axial loading. This fai...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.mtbio.2023.100731
PENG Heng, DONG Minghui, ZHANG Maoqi, BAI Mingxian, GUO Jianwei • Cailiao Baohu
(2026)
Sealing is a core factor for the safe operation of high-pressure proton exchange membrane electrolysis cells(PEMECs).To investigate the corrosion behavior of sealing polymer materials,two experimental methods were established: an accelerate...
DOAJ
Open Access (DOAJ)
DOI: 10.16577/j.issn.1001-1560.2026.0015
Jagadeesh Babu Veluru, Satheesh K. K., Trivedi D.C., Murthy V. Ramakrishna, Ph.D et al. • Journal of Engineered Fibers and Fabrics
(2007)
Electrospinning is one of the simplest techniques for obtaining polymer nano fibers. Nanofibers have large surface area to volume ratio and hence have excellent application potential in sensors, filter design etc. Polyaniline (PANI) is the ...
DOAJ
Open Access (DOAJ)
Denis A Romanov • Materials Research Express
(2020)
This article describes increasing wear resistance of 5CrNiMo die steel by more than 5 times. This effect is achieved by creating TiC-Ti-Al and TiB _2 -Ti-Al coatings on the surface of 5CrNiMo die steel. The microhardness of the formed coati...
DOAJ
Open Access (DOAJ)
DOI: 10.1088/2053-1591/ab86f6
Ayyappan M, Muthiah A • Materials Research Express
(2026)
In this paper, melting and solidification characteristics of composite PCM filled inside the shell and tube heat exchanger were investigated experimentally. ZnO nanoparticles (NPs) were synthesized using the sol–gel method. Myristic acid (M...
DOAJ
Open Access (DOAJ)
DOI: 10.1088/2053-1591/ae44e7
Lijing Di, Hua Yang, Tao Xian, Xiujuan Chen • Materials Research
(2018)
In this work, the g-C3N4 nanoparticles decorated BiFeO3 microspheres composites (g-C3N4/BiFeO3) were successfully synthesized by hydrothermal treatment of g-C3N4 nanoparticles together with BiFeO3 microspheres. The SEM and HRTEM observation...
DOAJ
Open Access (DOAJ)
DOI: 10.1590/1980-5373-mr-2018-0081
D. H. Fu, Y. H. Zhan, N. Yan, H. S. Xia • eXPRESS Polymer Letters
(2015)
Natural rubber containing graphene and carbon nanotubes (CNTs) composites were prepared by ultrasonicallyassisted latex mixing. Natural rubber filled by both graphene and CNTs show significant enhanced tensile strength, while graphene exhib...
DOAJ
Open Access (DOAJ)
DOI: 10.3144/expresspolymlett.2015.56
M.A. Bajaber, I.Y. Hakeem • Journal of Materials Research and Technology
(2021)
An advanced development in construction industry was achieved by applying ultra-high-performance concrete technology (UHPC). Intensive research efforts had been concentrated in construction to produced amazing levels of qualities with stren...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2020.12.051
Danga Rallet, Abba Paltahe, Cornelius Tsamo, Benoît Loura • Heliyon
(2022)
In this work, Clay-Biochar composite was synthesized from local Clay and local cotton wood, and applied for removal of glyphosate from aqueous solutions by adsorption. The Clay, Biochar and Clay-Biochar composite were characterized using X-...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.heliyon.2022.e09112
Guoping Ding, Yixuan Zhang, Yong Zhu • Advanced Composites Letters
(2019)
The advantages of carbon fiber-reinforced plastic (CFRP) box girders include good bending resistance, lightweight and high strength. Therefore, they are widely used in aerospace, rail transit, and other fields. When the CFRP box girder is s...
DOAJ
Open Access (DOAJ)
DOI: 10.1177/2633366X19891171