Reset
Showing 20 of 128 academic articles

Exploring fibre addition methods and mechanical properties of fibre-reinforced 3D printed concrete: A review

Syed Bustan Fatima Warsi, Biranchi Panda, Pankaj Biswas • Developments in the Built Environment (2023)

3D Concrete Printing (3DCP) is a growing field of sustainable technology that offers an avenue for rapid industrialisation of the construction industry. Over the years, many non-structural elements have been fabricated by 3D printing, thus ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.dibe.2023.100295

A First-principles analysis of Structural, Electronic, Elastic, and vacant properties of BCC, FCC and HCP tungsten at different electronic temperatures

X.B. Ye, B.C. Pan • Nuclear Materials and Energy (2023)

Since tungsten (W) was considered as the most promising plasma facing materials (PFMs) in fusion reactors, there has been extensive research on the physical performance of W-PFMs. It is found that under the extreme conditions in a fusion re...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.nme.2023.101447

Tribological and flexural characterization of dissimilar AA2024-T3/AA6082-T6 friction stir welded joints

Paritosh Mishra, Brijesh Prasad, Sunil Chamoli, Ibrahim M. Alarifi • Journal of Materials Research and Technology (2026)

The escalating demand for lightweight, high-strength structures in the aerospace and automotive sectors necessitates robust joining technologies for dissimilar aluminium alloys. This study systematically investigates the effects of friction...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2026.08.256

Sustainable Use of By-Products and Wastes from Greece to Produce Innovative Eco-Friendly Pervious Concrete

Petros Petrounias, Panagiota P. Giannakopoulou, Aikaterini Rogkala, Maria Kalpogiannaki et al. • Applied Sciences (2022)

This study was based on the reduction of the extraction of natural resources and, at the same time, was focused on the use of by-products and various wastes in construction applications by following the principles of circular economy. Steri...

DOAJ Open Access (DOAJ) DOI: 10.3390/app12125861

Stress-dilatancy properties for fiber-reinforced sand

KONG Yu-xia , SHENG Fei-fan , WANG Hui-juan • Yantu gongcheng xuebao (2018)

It is observed that randomly distributed polypropylene fibers act to interlock particles and thus improve the mechanical behavior of the reinforced soils. The polypropylene fiber inclusion clearly increases the shear strength of soils, and ...

DOAJ Open Access (DOAJ) DOI: 10.11779/CJGE201812012

Analytical solutions of steady-state temperature field for large-section freezing with rectangular layout of single-ring holes

HONG Zequn 1, SHI Rongjian 1, YUE Fengtian 1, HAN Lei 2 • Yantu gongcheng xuebao (2023)

The temperature field is the basis for assessing the mechanical state and water-sealing performance of the frozen wall, which is an important research direction of the artificial freezing theory. For the freezing pipes in the form of a clos...

DOAJ Open Access (DOAJ) DOI: 10.11779/CJGE20220700

Optimization of Metal Inert Gas Welding Process during Joining of Structural Steels- An Overview

Misra Ravindra Kumar, Porwal Rajesh Kumar • E3S Web of Conferences (2020)

Metal Inert Gas welding is a fast, reliable and cost effective technique for joining of different ferrous materials and steels used in the construction of large structures like Fe410WA, IS2062, SS304, AISI1040 and AISI316 etc. To obtain bet...

DOAJ Open Access (DOAJ) DOI: 10.1051/e3sconf/202018401028

Mechanical properties and constitutive analyses of basalt fiber crumb rubber mortars in soft rock roadways

Wei-Guo Qiao, Pershin Vladimir, Jun-Ling Qin, Shuai Zhang • E3S Web of Conferences (2021)

Uniaxial compressive stress-strain curves of several groups of basalt fiber crumb rubber mortars (BF-CRM) with different contents are tested. By comparing with the GZH model, the improved values of the parameters of the BF-CRM constitutive ...

DOAJ Open Access (DOAJ) DOI: 10.1051/e3sconf/202130301023

Effect of Accelerated Weathering on Color and Physico-mechanical Properties of Wood-plastic Composites with Nano Titanium Dioxide

Seyyed Khalil HosseiniHashemi, Ahad Rahimi, Nadir Ayrilmis • BioResources (2024)

Polypropylene (PP) with black locust wood flour and maleic grafted polypropylene were used to prepare wood plastic composites (WPC) by injection molding. The effect of the addition of nano titanium oxide (nano TiO2) on the properties of the...

DOAJ Open Access (DOAJ)

Preparation of Modified Kaolin Filler with Cesium and Its Application in Security Paper

Houssni El-Saied, Samya El-Sherbiny, Omnia Ali, Wafaa El-Saied et al. • Advances in Materials Science and Engineering (2013)

In this study, cesium was added intentionally during paper manufacture for protecting the papers against forgery and counterfeiting by sorbing cesium ions (Cs+) on kaolin, used as special filler in papermaking. The sorption of cesium from a...

DOAJ Open Access (DOAJ) DOI: 10.1155/2013/274245

Antimicrobial topical polymeric films loaded with Acetyl-11-keto-β-boswellic acid (AKBA), boswellic acid and silver nanoparticles: Optimization, characterization, and biological activity

Muhammad Jawad, Saurabh Bhatia, Ahmed Al-Harrasi, Sana Ullah et al. • Heliyon (2024)

The study examined the antimicrobial and antioxidant potential of pure Acetyl-11-keto-β-boswellic acid (AKBA), boswellic acid (70%) and AKBA loaded nanoparticles as topical polymeric films. The optimized concentration (0.05 % w/v) of pure A...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.heliyon.2024.e31671

Changes in the nonlinear and viscoelastic mechanical properties of the rat lamina cribrosa under chronic high intraocular pressure

Yuqing Wang, Liu Liu, Liu Liu, Jingxi Zhang et al. • Frontiers in Bioengineering and Biotechnology (2026)

IntroductionThe lamina cribrosa (LC) in the optic nerve head is the initial site of glaucomatous optic nerve injury. Under high intraocular pressure (IOP), the deformation of the LC compresses the retinal ganglion cell (RGC) axons passing t...

DOAJ Open Access (DOAJ) DOI: 10.3389/fbioe.2026.1875609

An Integrated Approach for Designing and Analyzing Lumbar Vertebral Biomodels with Artificial Disc Replacement

Mhd Ayham Darwich, Katreen Ebrahem, Maysaa Shash, Hasan Mhd Nazha et al. • Applied Mechanics (2023)

This study aims to develop an integrated approach for 3D lumbar vertebral biomodel design and analysis, specifically targeting unilevel disc degeneration and the replacement of lumbar artificial discs. Key objectives include improving exist...

DOAJ Open Access (DOAJ) DOI: 10.3390/applmech4040063

YAP1 reactivation in cardiomyocytes following ECM remodelling contributes to the development of contractile force and sarcomere maturation

Vladimir Vinarsky, Stefania Pagliari, Bacel Aldabash, Fabiana Martino et al. • Cell Death Discovery (2025)

Abstract Cardiac diseases are fueled by extracellular matrix (ECM) remodelling. Together with the altered ECM chemical composition, the mechanical turmoil associated with ECM maladaptive remodelling in the pathological heart drives the shut...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41420-025-02793-2

Effect of chemical treatment on the mechanical and thermal performance of flax fiber reinforced aluminium 6082 laminate: a machine learning-enhanced investigation

M. Vinod, B. S. Nithyananda, Shrishail B. Sollapur, Satish Gajbhiv et al. • Scientific Reports (2026)

Abstract This work examined the role of alkaline and epoxy-based surface chemical treatments on the mechanical and thermal properties of flax fiber reinforced Aluminum Alloy 6082 hybrid Fiber Metal Laminates (FMLs), integrated with machine ...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-026-58852-w

A study on the flexural behaviour of lightweight concrete beams reinforced with pumice, silica fume and carbon fibers

Guledagudd Chaitali B., Praveen Kannam, Kulkarni Vinayak N. • Journal of the Mechanical Behavior of Materials (2026)

Lightweight aggregate concrete (LWAC) incorporating pumice aggregates offers a sustainable alternative to conventional concrete, enabling a reduced self-weight while maintaining adequate strength and stiffness for structural applications. T...

DOAJ Open Access (DOAJ) DOI: 10.1515/jmbm-2025-0113

Framework for Enhancing Urban Living Through Sustainable Plant Selection in Residential Green Spaces

Udayasoorian Kaaviya Priya, Ramalingam Senthil • Urban Science (2024)

Residential greening is a critical strategy for mitigating the negative impacts of urbanization on the environment, biodiversity, and human well-being. Proper plant species selection is essential for the success of residential greening proj...

DOAJ Open Access (DOAJ) DOI: 10.3390/urbansci8040235

Manufacturing of a New Generations from the Recycled AL Scrape Reinforced with AL2O3 - GNS Composite Powder by Vortex Technique for Automotive Spare Parts

Fathei Nouh, Omayma El kady, Sabry abdel aziz • International Journal of Industry and Sustainable Development (2024)

This research addresses the urgent challenges facing the materials and metallurgical industries, driving manufacturers to seek innovative solutions for material recycling. Aluminum scrape in used to manufacture a composite material with a h...

DOAJ Open Access (DOAJ) DOI: 10.21608/ijisd.2024.302067.1074

Functionalising Collagen-Based Scaffolds With Platelet-Rich Plasma for Enhanced Skin Wound Healing Potential

Ronaldo J. F. C. do Amaral, Ronaldo J. F. C. do Amaral, Ronaldo J. F. C. do Amaral, Noora M. A. Zayed et al. • Frontiers in Bioengineering and Biotechnology (2019)

Porous collagen-glycosaminoglycan (collagen-GAG) scaffolds have shown promising clinical results for wound healing; however, these scaffolds do not replace the dermal and epidermal layer simultaneously and rely on local endogenous signaling...

DOAJ Open Access (DOAJ) DOI: 10.3389/fbioe.2019.00371