Reset
Showing 10 of 70 academic articles

Speciation of Ruthenium(III) Chloro Complexes in Hydrochloric Acid Solutions and Their Extraction Characteristics with an Amide-Containing Amine Compound

Tomoya Suzuki, Takeshi Ogata, Mikiya Tanaka, Tohru Kobayashi et al. • Metals (2018)

The refining of platinum group metals is based mainly on solvent extraction methods, whereas Ru is selectively recovered by distillation as RuO4. Replacement of distillation by extraction is expected to simplify the purification process. To...

DOAJ Open Access (DOAJ) DOI: 10.3390/met8070558

Importance of background threshold value development within risk‐based corrective action programs

Kenneth S. Tramm, Jason T. Minter, Catherine A. Seaton • Vadose Zone Journal (2024)

Abstract Risk‐based corrective action (RBCA) programs employ conservative models to develop default values for soil screening, which simplify the risk assessment process. However, for several naturally occurring metals (e.g., arsenic and le...

DOAJ Open Access (DOAJ) DOI: 10.1002/vzj2.20294

Electrospinning: A Powerful Tool to Improve the Corrosion Resistance of Metallic Surfaces Using Nanofibrous Coatings

Pedro J. Rivero, Deyo Maeztu Redin, Rafael J. Rodríguez • Metals (2020)

The use of surface engineering techniques to tune-up the composition of nanostructured thin-films for developing functional coatings with advanced properties is a hot topic within the scientific community. The control of the coating structu...

DOAJ Open Access (DOAJ) DOI: 10.3390/met10030350

Evolution of the Shadow Effect with Film Thickness and Substrate Conductivity on a Hemispherical Workpiece during Magnetron Sputtering

Huaiyuan Liu, Donglin Ma, Yantao Li, Lina You et al. • Metals (2023)

When depositing films on a complex workpiece surface by magnetron sputtering, the shadow effect occurs and causes the columnar structure to tilt toward the substrate owing to the oblique incident angle of the plasma flux, affecting the micr...

DOAJ Open Access (DOAJ) DOI: 10.3390/met13010165

A 2D and 3D segmentation-based microstructure study on the role of brittle phases in diffusion brazed AISI 304L/NiCrSiFeMoB joints

Johannes L. Otto, Lukas M. Sauer, Malte Brink, Thorge Schaum et al. • Materials & Design (2023)

Nickel-based filler metals are frequently used in high temperature vacuum diffusion brazing for austenitic stainless-steel joints when components are subjected to high static or dynamic loads, corrosive environments and elevated temperature...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.matdes.2023.112401

Machine Learning‐Driven Biomaterials Evolution

Ady Suwardi, Fuke Wang, Kun Xue, Ming‐Yong Han et al. • Advanced Materials (2021)

Biomaterials is an exciting and dynamic field, which uses a collection of diverse materials to achieve desired biological responses. While there is constant evolution and innovation in materials with time, biomaterials research has been ham...

OPENALEX DOI: https://doi.org/10.1002/adma.202102703

High temperature Nb-Si alloys using data science: optimization of fracture toughness and high-temperature strength

Chao Xu, Dezhi Chen, Xiaofu Zhang, Qi Wang et al. • Nature Communications (2026)

Abstract High temperature Nb-Si based alloys face a critical challenge: achieving adequate room-temperature fracture toughness ( > 18 MPa·m1/2) for processing while maintaining high-temperature strength, properties that typically compete wi...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41467-026-75353-6

Unlocking pseudocapacitors prolonged electrode fabrication via ultra-short laser pulses and machine learning

Kavian Khosravinia, Amirkianoosh Kiani • iScience (2023)

Summary: Pseudocapacitors outperform lithium-ion batteries in terms of charging rate and power density. However, their electrode manufacturing procedures are prolonged and environmentally unfriendly, posing a research challenge. To address ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.isci.2023.106438