Home »
Academic Articles & Research Papers
Showing 20 of 223 academic articles
Tafadzwa Kaseke, Umezuruike Linus Opara, Olaniyi Amos Fawole • Heliyon
(2020)
Fruit seed is a by-product of fruit processing into juice and other products. Despite being treated as waste, fruit seed contains oil with health benefits comparable or even higher than the conventional seed oil from field crops. In additio...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.heliyon.2020.e04962
Zelin Zhang, Yu Qin, Jie Zhu, Caoyuan Wang et al. • Micromachines
(2024)
We optimized and fabricated an ultra-bend-resistant 4-core simplex cable (SXC) employing 4-core multicore fiber (MCF) suitable for short-reach dense spatial division multiplexing (DSDM) optical transmission in the O-band. The characteristic...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/mi15010108
Zhe Shen, Shijie Huang • Nanomaterials
(2022)
Needle beams have received widespread attention due to their unique characteristics of high intensity, small focal size, and extended depth of focus (DOF). Here, a single–layer all–dielectric metalens based on Pancharatnam–Berry (PB) was us...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/nano12224074
Yunsong Hua, Yujiao Xin, Hongyang Dai, Hui Yang et al. • Frontiers in Physics
(2022)
The macroscopic mechanical property and the stability of granular mechanics system are determined by packing structure. Cells play a fundamental role in granular statistical mechanics and thus cells were utilized in this paper to research t...
DOAJ
Open Access (DOAJ)
DOI: 10.3389/fphy.2022.994121
Shivasubramanian Gopinath, Joseph Rosen, Vijayakumar Anand • JPhys Photonics
(2026)
Fresnel incoherent correlation holography (FINCH) is a self-interference-based incoherent digital holography method. In FINCH, light from an object point is split into two beams, modulated differently using two lenses with different focal d...
DOAJ
Open Access (DOAJ)
DOI: 10.1088/2515-7647/ae38ae
Mohamed Soliman Soliman, Karia Noorliza • Journal of Information Technology Management
(2020)
Organizations nowadays focus on, not implementing ERP systems, but also leveraging ERP systems as part of their digital strategy. They holistically address people, processes, and technology for a digital transformation. Meanwhile, higher ed...
DOAJ
Open Access (DOAJ)
DOI: 10.22059/jitm.2020.292788.2424
Xuegang Li, Yang Shi, Cheng Zhao, Guocang Sun et al. • Journal of Marine Science and Engineering
(2024)
To study the rapid estimation method and characteristics of low-frequency ambient sea noise generated by far-field ships, firstly, based on the reciprocity principle of sound fields and the fact that the number of noise sources significantl...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/jmse12122194
Marianna Dedousi, Eirini-Maria Melanouri, Dimitris Karayannis, Eleftherios-Ikaros Kaminarides et al. • Carbon Resources Conversion
(2024)
Five agro-industrial residues, their corresponding spent mushroom substrates (SMS), commercial fresh and spent mushroom compost of Agaricus (SMC) and Pleurotus ostreatus (SMS GZ) cultivation, Pleurotus and Agaricus waste (stipes/mishappen m...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.crcon.2023.08.001
Ceren Kütahya, Catalina Cruañas Pániker, Faith Ly, Arjun Jerath et al. • npj Materials Degradation
(2026)
Abstract Polyolefins, commonly used in packaging and single-use products, are notoriously persistent in the environment, contributing significantly to environmental pollution. In scientific literature to date, polyolefins have not been repo...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41529-026-00817-5
PENG Heng, DONG Minghui, ZHANG Maoqi, BAI Mingxian, GUO Jianwei • Cailiao Baohu
(2026)
Sealing is a core factor for the safe operation of high-pressure proton exchange membrane electrolysis cells(PEMECs).To investigate the corrosion behavior of sealing polymer materials,two experimental methods were established: an accelerate...
DOAJ
Open Access (DOAJ)
DOI: 10.16577/j.issn.1001-1560.2026.0015
Zhichao Tang, Jin Cui, Muzhi Yu, Weiqiang Zhu et al. • Materials & Design
(2022)
The diffusion growth of intermetallic compounds in Al-Er alloys are closely related to the properties of the alloys. The current work aims at explaining the dominance of Al3Er in the Al-Er alloys precipitation phases and the interface thin ...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.matdes.2022.111341
Wei Wei, Qiang Li, Fangchao Xu, Xiaoyou Zhang et al. • Actuators
(2020)
This paper proposes an electromagnetic actuator that concurrently realizes two working functions of vibration suppression and energy regeneration. The actuator consists of four permanent magnetic rings, three soft iron rings, three coils, a...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/act9020042
Jilong Zhao, Qing Wang, Qingfeng Han • IEEE Access
(2024)
In this paper, a novel axial flux reversal permanent magnet (PM) (AFRPM) machine, which combines the merit of the axial flux PM (AFPM) machine and flux reversal PM machine, is proposed. Meanwhile, according to the characteristics of the mac...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/ACCESS.2024.3389699
Qizhi Xie, Song Cui, Peilin Cheng, Qiang Liu • IEEE Access
(2023)
The inchworm in-pipe robot has the advantages of stable support, low walking resistance, and high flexibility. However, the gait motion of in-pipe robots relies on the precise coordination of three motors, which greatly increases the comple...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/ACCESS.2023.3327269
Aiguo SUN, Haitao LI, Xuezheng CHENG, Yi WANG et al. • Meikuang Anquan
(2024)
According to the engineering geological characteristics and production technology level of Qianyingzi Coal Mine, the stability control technology of surrounding rock of the cutting roof and pressure relief roadway is proposed. For the advan...
DOAJ
Open Access (DOAJ)
DOI: 10.13347/j.cnki.mkaq.20231069
Juliana Zottis, Carla Adriana Theis Soares Diehl, Alexandre da Silva Rocha • Journal of Materials Research and Technology
(2018)
The purpose of this paper is to investigate the correlation of strain and hardness parameters in a drawing process chain of an SAE 1045 steel bar. The present work discusses the application of the experimental and numerical method of analys...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2018.01.004
ZHOU Tao;TANG Jianyu;ZHANG Fan;LIU Wenbin • Yuanzineng kexue jishu
(2022)
The movement and deposition of nanoparticles in supercritical carbon dioxide is a current international frontier subject. In the development of new nuclear reactors, using supercritical carbon dioxide Brayton cycle instead of traditional st...
DOAJ
Open Access (DOAJ)
Condro Kartiko • Jurnal Nasional Teknik Elektro dan Teknologi Informasi
(2019)
The rapid growth of the world of information technology has an impact on the spread of the amount of software. Software maintenance is needed to support the quality of software. Software quality can be measured in terms of product and proce...
DOAJ
Open Access (DOAJ)
DOI: 10.22146/jnteti.v8i1.485
Yebing Tian, Chengjin Tian, Sohini Chowdhury, Jinguo Han et al. • Journal of Materials Research and Technology
(2023)
A novel body-armour-like abrasive tool (BAAT) was developed for the high-shear and low-pressure grinding of super alloys with an aim to reduce the ratio of normal force to tangential force. A composite process model was developed based on f...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2023.04.205
Omar Turki Hazzaa, Dewi Fariha Abdullah, Adel Mohammed Dhahebi • Asian Journal of Accounting Perspectives
(2022)
Research aim: This research analyses the systematic review of the literature (2015–2021) concerning corporate governance, internal control system, and their impact on financial performance. This study brings about several findings on the ro...
DOAJ
Open Access (DOAJ)
DOI: 10.22452/AJAP.vol15no1.1