Reset
Showing 20 of 393 academic articles

An agent-based modeling framework for the design of a dynamic closed-loop supply chain network

Ayşegül Bozdoğan, Latife Görkemli Aykut, Neslihan Demirel • Complex & Intelligent Systems (2022)

Abstract The supply chain is a dynamic and uncertain system consisting of material, information, and fund flows between different organizations, from the acquisition of the raw materials to the delivery of the finished products to the end c...

DOAJ Open Access (DOAJ) DOI: 10.1007/s40747-022-00780-z

Brassinosteroid-lipid membrane interaction under low and high temperature stress in model systems

Elżbieta Rudolphi-Szydło, Barbara Dyba, Anna Janeczko, Dariusz Latowski et al. • BMC Plant Biology (2022)

Abstract Background In earlier studies [1], we indicated that applying brassinosteroids (BRs) to lipids that had been isolated from plants altered the physicochemical properties of the monolayers. A continuation of these dependencies using ...

DOAJ Open Access (DOAJ) DOI: 10.1186/s12870-022-03619-4

Simulation of the synergistic effect of multiple operation parameters on cavity soliton in nonlinear fiber resonator

Haiyang Liu, Zhe Li, Zeqiu Hu, Lu Liu et al. • Results in Physics (2024)

All optical soliton communication is a new generation of ultra-long distance and ultra-high speed optical fiber communication technology. Optical cavity solitons (CSs), whose pulse property is unique, have shown great potentials in optical ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.rinp.2024.107821

Investigating the cost of mechanized unpaved road maintenance operations in Uganda

Andrew Moses Obeti, Lawrence Muhwezi, John Muhumuza Kakitahi, Chris Bic Byaruhanga • Transportation Research Interdisciplinary Perspectives (2024)

Force Account Mechanism (FAM) is the predominant road maintenance system in Uganda’s local government setup and a similar, though slightly different approach, is used in some large private sector agriculture plantations. With the Uganda Roa...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.trip.2024.101135

Seasonal particle responses to near‐bed shear stress in a shallow, wave‐ and current‐driven environment

Grace Chang, Galen Egan, Joseph D. McNeil, Samuel McWilliams et al. • Limnology and Oceanography Letters (2022)

Abstract Novel analysis of in situ acoustic and optical data collected in a shallow, wave‐ and current‐driven environment enabled determination of (1) particle characteristics that were most affected by near‐bed physical forcing over season...

DOAJ Open Access (DOAJ) DOI: 10.1002/lol2.10221

Development of functional cookies form wheat-pumpkin seed based composite flour

Feriehiwote Weldeyohanis Gebremariam, Eneyew Tadesse Melaku, Venkatesa Prabhu Sundramurthy, Henock Woldemichael Woldemariam • Heliyon (2024)

To develop high quality cookies, even seemingly smallest changes depended on factors that can affect taste, texture, and nutritional value. In this light, this study aimed to investigate the upshot of refined wheat flour and pumpkin seed fl...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.heliyon.2024.e24443

Remaining Useful Life Prediction for Nonlinear Degraded Equipment With Bivariate Time Scales

Hong Pei, Changhua Hu, Xiaosheng Si, Jianfei Zheng et al. • IEEE Access (2019)

As the fundamental and prerequisite work of remaining useful life (RUL) prediction, degradation modeling directly affects the accuracy of RUL prediction. Existing degradation models are all developed under a single time scale, and less rese...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2019.2951804

Reducing Torque Ripple Through Innovative Configuration of Permanent Magnet Based on Air Gap Field Modulation Theory in a Novel Axial Flux Reversal Permanent Magnet Machine

Jilong Zhao, Qing Wang, Qingfeng Han • IEEE Access (2024)

In this paper, a novel axial flux reversal permanent magnet (PM) (AFRPM) machine, which combines the merit of the axial flux PM (AFPM) machine and flux reversal PM machine, is proposed. Meanwhile, according to the characteristics of the mac...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2024.3389699

Feature Selection and Rule Generation Integrated Learning for Takagi-Sugeno-Kang Fuzzy System and its Application in Medical Data Classification

Xiaoqing Gu, Cong Zhang, Tongguang Ni • IEEE Access (2019)

The rule-based fuzzy systems have successfully applied for numerous medical data classification problems. However, structuring the concise and interpretable fuzzy rules with good classification performance is still a big challenge. To addre...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2019.2954707

LBT-YOLO: A Lightweight Road Targeting Algorithm Based on Task Aligned Dynamic Detection Heads

Pei Tang, Zhenyu Ding, Minnan Jiang, Weikai Xu et al. • IEEE Access (2024)

Autonomous driving technology plays a key role in addressing traffic safety issues and relieving traffic congestion by virtue of its capabilities of enabling accurate environmental perception and real-time response. Aiming at the problem of...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2024.3509694

A comparative investigation on strain induced crystallization for graphene and carbon nanotubes filled natural rubber composites

D. H. Fu, Y. H. Zhan, N. Yan, H. S. Xia • eXPRESS Polymer Letters (2015)

Natural rubber containing graphene and carbon nanotubes (CNTs) composites were prepared by ultrasonicallyassisted latex mixing. Natural rubber filled by both graphene and CNTs show significant enhanced tensile strength, while graphene exhib...

DOAJ Open Access (DOAJ) DOI: 10.3144/expresspolymlett.2015.56

A case study on morphological aspects of distinct magnetized 3D hybrid nanoparticles on fluid flow between two orthogonal rotating disks: An application of thermal energy systems

Zahra Abdelmalek, M. Zubair Akbar Qureshi, S. Bilal, Qadeer Raza et al. • Case Studies in Thermal Engineering (2021)

The consolidation power of different nanomaterials such as metallic nanoparticles and metallic-oxides nanoparticles in a new-fangled and energetic hybrid material should give rise to fascinating properties that combine the advantages of eac...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.csite.2020.100744

Creep behaviors and constitutive model of transversely isotropic rocks

WANG Zhe-chao 1, 2, ZONG Zhi 1, QIAO Li-ping 1, 2, LI Wei1, LIU Jie 1 • Yantu gongcheng xuebao (2018)

The bedded carbonaceous slate exhibits transversely isotropic creep properties. The creep behaviors of carbonaceous slate are studied using the triaxial compressive creep tests on horizontal bedding specimens and vertical bedding specimens....

DOAJ Open Access (DOAJ) DOI: 10.11779/CJGE201807008

Evaluation of experimentally observed asymmetric distributions of hardness, strain and residual stress in cold drawn bars by FEM-simulation

Juliana Zottis, Carla Adriana Theis Soares Diehl, Alexandre da Silva Rocha • Journal of Materials Research and Technology (2018)

The purpose of this paper is to investigate the correlation of strain and hardness parameters in a drawing process chain of an SAE 1045 steel bar. The present work discusses the application of the experimental and numerical method of analys...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2018.01.004

Application of TyG index and carotid ultrasound parameters in the prediction of ischemic stroke

Huimin Guo, Huimin Guo, Sen Wang, Haizheng Wang et al. • Frontiers in Endocrinology (2025)

ObjectiveThe triglyceride - glucose (TyG) index has been confirmed as an independent risk factor for ischemic stroke (IS) in numerous studies. In terms of the role of carotid ultrasound in the risk assessment of IS, the focus has shifted fr...

DOAJ Open Access (DOAJ) DOI: 10.3389/fendo.2025.1481676

Conjugate mixed convection heat transfer with internal heat generation in a lid-driven enclosure with spinning solid cylinder

Md. Jisan Mahmud, Ahmed Imtiaz Rais, Md. Rakib Hossain, Sumon Saha • Heliyon (2022)

The current study investigates conjugate mixed convection heat transmission with internal heat generation in a square enclosure driven by a sliding lid and a solid cylinder with a heat-conducting surface at its center. The enclosure has a s...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.heliyon.2022.e11968

Development, modelling and optimization of process parameters on the tensile strength of aluminum, reinforced with pumice and carbonated coal hybrid composites for brake disc application

Tanimu Kogi Ibrahim, Danjuma Saleh Yawas, Julius Thaddaeus, Bashar Danasabe et al. • Scientific Reports (2024)

Abstract This study focuses on optimizing double stir casting process parameters to enhance the tensile strength of hybrid composites comprising aluminum alloy, brown pumice, and coal ash, intended for brake disc applications. Analytical te...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-024-67476-x