Home »
Academic Articles & Research Papers
Showing 20 of 180 academic articles
Xiangyang Zheng, Yancai Xiao, Xinran Li • Machines
(2026)
Wind turbine (WT) misalignment fault diagnosis is constrained by critical signal processing challenges: weak fault features, intense background noise, and poor generalization. This study proposes a lightweight method for high-precision faul...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/machines14020155
Olha Ivashchenko, Oleg Khudolii, Mykola Khudolii • Physical Education Theory and Methodology
(2026)
Objectives. To synthesize contemporary scientific approaches to interpreting physical education of schoolchildren within the logic of a managed learning process and to clarify the role of pedagogical control, modelling, and age-related deve...
DOAJ
Open Access (DOAJ)
DOI: 10.17309/tmfv.2026.2.01
Manuel Wehner, Christian Blesing, Niklas Ullrich, Max Gössner et al. • Logistics Research
(2025)
PurposeThis paper investigates an integration of automation and digital technologies within air cargo logistics, focusing on empirical testing of the O3dyn pallet transport robot prototype at Munich Airport. The presented research identifie...
DOAJ
Open Access (DOAJ)
DOI: 10.1108/LORE-04-2025-0054
• 工程科学与技术
(2007)
Abstract:This paper studied the water flow of SPAC system in Zoige wetland, so as to evaluate accurately and utilize suitably water resource of wetland. Based on the distinctive studies on the sub systems of soil plant atmosphere systems an...
DOAJ
Open Access (DOAJ)
Zhigang Tao, Yu Shu, Xiaojie Yang, Yanyan Peng et al. • International Journal of Mining Science and Technology
(2020)
A physical model for the footwall slope of Nanfen open-pit mine, China was established using a self-developed deep geological engineering disaster model test system. A thermosensitive similar material, paraffin, was selected to simulate a w...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.ijmst.2020.05.006
Antonín Bohačík, Radek Fujdiak • Smart Cities
(2024)
The use of digital twins (DTs) in the electric power industry and other industries is a hot topic of research, especially concerning the potential of DTs to improve processes and management. This paper aims to present approaches to the crea...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/smartcities7050105
Beniyel Muthuraj, Sivapragash Murugesan, Rajesh Rajamony, Michael Thomas Rex Francis • Materials Research
(2025)
This study uses an artificial neural network (ANN) model to predict the wear rate and friction coefficient of the magnesium alloy AZ91D, based on experimental data from a pin-on-disc tribometer. The model includes three essential process pa...
DOAJ
Open Access (DOAJ)
DOI: 10.1590/1980-5373-mr-2025-0388
VINEREANU Adam, POTOP Georgeta-Lidia, LEON Ana-Lacramioara, VINEREANU Elena • Annals of the University of Oradea: Fascicle of Textiles, Leatherwork
(2014)
This paper presents the experiments that were conducted on the installation of continuous bulking and thermofixing “SUPERBA” type TVP-2S for optimization of the plush yarns bulking process. There were considered plush yarns Nm 6.5/2, made o...
DOAJ
Open Access (DOAJ)
Mohammed Ragab, Ahmed Galal, Randa R. Elmorsi, Wael Abdelwahab et al. • Scientific Reports
(2026)
Abstract Phosphoric acid is the second most widely produced mineral acid worldwide and is predominantly manufactured via the wet process. However, wet-process phosphoric acid (WPPA) contains significant levels of dissolved and suspended imp...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41598-026-71634-8
Abbirami Balachandran, Sy Bing Choi, Morak-Młodawska Beata, Jeleń Małgorzata et al. • Molecules
(2023)
1. Diabetic chronic wounds, mainly foot ulcers, constitute one of the most common complications of poorly managed diabetes mellitus. The most typical reasons are insufficient glycemic management, latent neuropathy, peripheral vascular disea...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/molecules28031043
Hamed Hamishehkar, Soheila Hosseini, Abdolhossein Naseri, Azam Safarnejad et al. • BioImpacts
(2016)
Introduction: The drug-plasma protein interaction is a fundamental issue in guessing and checking the serious drug side effects related with other drugs. The purpose of this research was to study the interaction of cephalexin with bovine se...
DOAJ
Open Access (DOAJ)
DOI: 10.15171/bi.2016.19
M. Boettle, D. Rybski, J. P. Kropp • Natural Hazards and Earth System Sciences
(2016)
In contrast to recent advances in projecting sea levels, estimations
about the economic impact of sea level rise are vague.
Nonetheless, they are of great importance for policy making with
regard to adaptation and greenhouse-gas mitigation....
DOAJ
Open Access (DOAJ)
DOI: 10.5194/nhess-16-559-2016
Yeon-Moon Choo, Ji-Min Kim, Ik-Tae An • Entropy
(2021)
Since the 1960s, many rivers have been destroyed as a consequence of the process of rapid urbanization. As accurate figures are important to repair rivers, there have been many research reports on methods to obtain the exact river slope and...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/e23080965
G. B. Rybicki, Alan P. Lightman • Wiley eBooks
(1985)
Chapter 1 Fundamentals of Radiative Transfer 1.1 The Electromagnetic Spectrum Elementary Properties of Radiation 1.2 Radiative Flux Macroscopic Description of the Propagation of Radiation Flux from an Isotropic Source-The Inverse Square Law...
OPENALEX
DOI: https://doi.org/10.1002/9783527618170
Manik Awale, Shrirang Pund, Hassan S. Bakouch, Aishwarya Ghodake et al. • Entropy
(2026)
In this article, we propose a first-order integer-valued autoregressive (INAR(1)) model based on binomial thinning, in which the innovation sequence follows a zero–one–two-modified Poisson (ZOTMPo) distribution. The proposed model accommoda...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/e28080889
Ramesh Narayan • New Journal of Physics
(2005)
This paper reviews the current status of black hole (BH) astrophysics, focusing on topics of interest to a physics audience. Astronomers have discovered dozens of compact objects with masses greater than 3 M ⊙ , the likely maximum mass of a...
OPENALEX
cc-by
DOI: https://doi.org/10.1088/1367-2630/7/1/199
Diana Popescu, Mariana Cristiana Iacob, Cristian Tarbă, Dan Lăptoiu et al. • Journal of Manufacturing and Materials Processing
(2024)
This article proposes the integration of two novel aspects into the production of 3D-printed customized wrist-hand orthoses. One aspect involves the material, particularly Colorfabb varioShore thermoplastic polyurethane (TPU) filament with ...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/jmmp8010029
Gianluca Massera, Gianluca Massera, Angelo Cangelosi, Stefano Nolfi • Frontiers in Neurorobotics
(2007)
In this paper, we show how a simulated anthropomorphic robotic arm controlled by an artificial neural network can develop effective reaching and grasping behaviour through a trial and error process in which the free parameters encode the co...
DOAJ
Open Access (DOAJ)
DOI: 10.3389/neuro.12.004.2007
Ionut Geonea, Simona - Mariana Cretu • Journal of Industrial Design and Engineering Graphics
(2019)
The objective of this study is the use of computer graphics as teaching methodology in the field of robotics, focused on over constrained mechanisms’ mobility. Because the analytical methods applied to calculate the mobility of robots have ...
DOAJ
Open Access (DOAJ)
Zhi Zhu, Min Wang, Huijie Zhang, Xiao Zhang et al. • Metals
(2017)
In this study, a 3D coupled thermo-mechanical finite element model is developed to predict and analyze the defect formation during friction stir welding based on coupled Eulerian Lagrangian method. The model is validated by comparing the es...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/met7070256