Home »
Academic Articles & Research Papers
Showing 20 of 1,492 academic articles
E. Kocan, M. Pejanovic-Djurisic • Telfor Journal
(2012)
In this paper we present analytical performance evaluation of a dual-hop OFDM amplify-andforward (AF) variable gain (VG) relay system implementing ordered subcarrier mapping (SCM) at the relay station (R), considered to be a very interestin...
DOAJ
Open Access (DOAJ)
Chadi Nohra, Bechara Nehme, Raymond Ghandour, Ossama Dankar et al. • IEEE Access
(2026)
The integration of communication networks into modern power systems introduces variable time delays that degrade the performance of traditional Load Frequency Control (LFC), while the shift towards renewable energy sources increases system ...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/ACCESS.2026.3675126
Jefferson S. Costa, Angelo Lunardi, Alessio Iovine, Darlan Alexandria Fernandes et al. • IEEE Access
(2025)
Model predictive control (MPC) has emerged as a highly regarded control strategy in power electronics for renewable energy applications. While it minimizes tracking errors and control effort, a significant challenge is the lack of systemati...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/ACCESS.2025.3603336
Mallika Phull, Mandeep Kaur, Yashika Singla, Urvashi Singh et al. • RSC Advances
(2026)
The development of sustainable fluorescent nanomaterials from renewable biomass represents a promising strategy for environmentally benign chemical sensing. In this work, nitrogen-doped carbon dots (N-CDs) were synthesized from clove biomas...
DOAJ
Open Access (DOAJ)
DOI: 10.1039/d6ra05591e
Sabrine Baachaoui, Walid Mabrouk, Khaled Charradi, Bechir Slimi et al. • Royal Society Open Science
(2023)
The development of cost-effective materials for fabricating electrodes is crucial for drug, pharmaceutical and environmental applications. This paper presents the synthesis and characterization of a novel polyketimine (PKI) membrane obtaine...
DOAJ
Open Access (DOAJ)
DOI: 10.1098/rsos.230294
Junki Joe, M. D. Thouless, M. D. Thouless, J. R. Barber • Frontiers in Mechanical Engineering
(2020)
If an incompressible elastic layer bonded to a rigid plane is placed close to a second rigid plane, adhesive interactions between the surfaces can cause elastic instabilities. These lead to spatially non-uniform traction and gap distributio...
DOAJ
Open Access (DOAJ)
DOI: 10.3389/fmech.2020.00031
Miaoyi Tian, Shengbiao Ma, Zhenchao Dong, Shenao Wang et al. • Scientific Reports
(2026)
Abstract Bacterial cellulose (BC) is a favored material for medical wound dressings due to its biocompatibility and water-holding capacity, yet it lacks inherent antibacterial and hemostatic capabilities. To enhance its functionality, a nov...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41598-026-48080-7
Jiawei Jing, Jiamei Chen, Xing Xin, Peisong Peng et al. • Advanced Science
(2026)
ABSTRACT The growing demand for polarized photodetection has driven the need for compact, integrated, and multifunctional device architectures. Although one‐dimensional (1D) materials are of significant interest for their innate polarizatio...
DOAJ
Open Access (DOAJ)
DOI: 10.1002/advs.75736
Chao Ding, Huali Hao, Rui Ma, Changqing Ye et al. • Journal of Materials Research and Technology
(2023)
Al–50Si alloys were prepared by powder extrusion and characterized for electronic packaging. The optimization of powder size, extrusion temperature, and heat treatment parameters was performed to enhance the microstructure and thermo-physic...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2023.11.038
Yue Zhang, Jun Xiao, Juhua Liang, Wei Pei et al. • Journal of Materials Research and Technology
(2022)
Super austenitic stainless steel (SASS) was prepared by non-consumable vacuum arc melting for the first time. The effects of rare earth (RE) elements on its solidification microstructure and segregation behavior were investigated. The σ pha...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2022.04.120
Minglong Kang, Li Zhou, Yunlai Deng, Jinqin Lei • Advances in Materials Science and Engineering
(2021)
Multilayer brazeable aluminum alloy sheet is prone to collapse during high-temperature brazing process. The sagging resistance of the aluminum composite sheet needs to be further improved for quality control. Effects of annealing and rate o...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2021/6625548
Parth S. Shah, Frank Yang, Chaitali Joshi, Mohammad Mirhosseini • PRX Quantum
(2024)
Distributing entanglement between remote sites is integral to quantum networks. Here, we demonstrate the autonomous stabilization of remote entanglement between a pair of noninteracting superconducting qubits connected by an open waveguide ...
DOAJ
Open Access (DOAJ)
DOI: 10.1103/PRXQuantum.5.030346
Yuan-Ting Liu, Kai Wang, Yuan-Dong Liu, Dong-Sheng Wang • Entropy
(2023)
The existence of universal quantum computers has been theoretically well established. However, building up a real quantum computer system not only relies on the theory of universality, but also needs methods to satisfy requirements on other...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/e25081187
Loïc Henriet, Lucas Béguin, Adrien Signoles, Thierry Lahaye et al. • Quantum
(2020)
The manipulation of neutral atoms by light is at the heart of countless scientific discoveries in the field of quantum physics in the last three decades. The level of control that has been achieved at the single particle level within arrays...
OPENALEX
cc-by
DOI: https://doi.org/10.22331/q-2020-09-21-327
S. Haroche, J. M. Raimond • Physics Today
(1996)
The principles of quantum computing were laid out about 15 years ago by computer scientists applying the superposition principle of quantum mechanics to computer operation. Quantum computing has recently become a hot topic in physics, with ...
OPENALEX
DOI: https://doi.org/10.1063/1.881512
Tony Hey • Computing & Control Engineering Journal
(1999)
The basic ideas of quantum computation are introduced by a brief discussion of Bennett (1973, 1982) and Fredkin's (1982, 1997) ideas of reversible computation. After some remarks about Deutsch's (1985) pioneering work on quantum complexity ...
OPENALEX
Open Access
DOI: https://doi.org/10.1049/cce:19990303
Sergey B. Bravyi, Oliver Dial, Jay Gambetta, Darı́o Gil et al. • Journal of Applied Physics
(2022)
For the first time in history, we are seeing a branching point in computing paradigms with the emergence of quantum processing units (QPUs). Extracting the full potential of computation and realizing quantum algorithms with a super-polynomi...
OPENALEX
Open Access
DOI: https://doi.org/10.1063/5.0082975
Leonard M. Adleman, Jonathan DeMarrais, Ming-Deh A. Huang • SIAM Journal on Computing
(1997)
In this paper some theoretical and (potentially) practical aspects of quantum computing are considered. Using the tools of transcendental number theory it is demonstrated that quantum Turing machines (QTM) with rational amplitudes are suffi...
OPENALEX
DOI: https://doi.org/10.1137/s0097539795293639
Siavash Siavashian Rashidi, Ali Broumandnia, Abbas Mirzaei, Ramin Karimi • Scientific Reports
(2026)
Abstract The transition toward 6G-enabled Industrial Internet of Things (IIoT) requires strict Ultra-Reliable Low-Latency Communication (URLLC), creating a fundamental trade-off with energy consumption. Orchestrating resources in dense, hyp...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41598-026-55177-6
Marin Bukov, Alexandre G. R. Day, Dries Sels, Phillip Weinberg et al. • Physical Review X
(2018)
The ability to prepare a physical system in a desired quantum state is central to many areas of physics such as nuclear magnetic resonance, cold atoms, and quantum computing. Yet, preparing states quickly and with high fidelity remains a fo...
DOAJ
Open Access (DOAJ)
DOI: 10.1103/PhysRevX.8.031086