Reset
Showing 20 of 128 academic articles

Elastic modulus of β-Ga2O3 nanowires measured by resonance and three-point bending techniques

Annamarija Trausa, Sven Oras, Sergei Vlassov, Mikk Antsov et al. • Beilstein Journal of Nanotechnology (2024)

Due to the recent interest in ultrawide bandgap β-Ga2O3 thin films and nanostructures for various electronics and UV device applications, it is important to understand the mechanical properties of Ga2O3 nanowires (NWs). In this work, we inv...

DOAJ Open Access (DOAJ) DOI: 10.3762/bjnano.15.58

Dendritic boron and nitrogen doped high-entropy alloy porous carbon fibers for high-efficiency hydrogen evolution reaction

Jin-Hua Liu, Jie Zheng, Mang Niu, Xuehao Li et al. • iScience (2024)

Summary: Among various electrocatalysts, high-entropy alloys (HEAs) have gained significant attention for their unique properties and excellent catalytic activity in the hydrogen evolution reaction (HER). However, the precise synthesis of H...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.isci.2024.109616

Effect of heat treatment on the microstructure and corrosion resistance of laser powder bed fusion ODS-316L

Qian Zheng, Chao Lu, Yan Yin, Xiaoli Cui et al. • Journal of Materials Research and Technology (2025)

As a candidate cladding material for fourth-generation nuclear energy systems, the microstructure and properties of oxide dispersion strengthened 316L (ODS-316L) steel are significantly affected by heat treatment (HT) processes. This paper ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2025.09.256

Laser Welding of Dissimilar Metal Joint of 6061 Al Alloy and Al Matrix Composite

Jun Dai, Banglong Yu, Wei Jiang, Hla Min Htun et al. • Advances in Materials Science and Engineering (2019)

In this paper, dissimilar metal joints of 6061 aluminum alloy and aluminum matrix composite material are investigated by laser welding. TiB2 particles were added into the lap joint. The welding process, microstructure, and the corrosion pro...

DOAJ Open Access (DOAJ) DOI: 10.1155/2019/2359841

Exact solution for bending analysis of functionally graded micro-plates based on strain gradient theory

Mohammadi Meisam, Iranmanesh Afshin, Naseralavi Seyed Sadegh, Farahmand Hamed • Science and Engineering of Composite Materials (2018)

In the present article, static analysis of thin functionally graded micro-plates, based on Kirchhoff plate theory, is investigated. Utilizing the strain gradient theory and principle of minimum total potential energy, governing equations of...

DOAJ Open Access (DOAJ) DOI: 10.1515/secm-2015-0415

Materials Science for Engineers

J.C. Anderson, K. D. Leaver, Rees D. Rawlings, Patrick S. Leevers • CRC Press eBooks (2004)

This fifth edition of a successful textbook continues to provide students with an introduction to the basic principles of materials science over a broad range of topics. The authors have revised and updated this edition to include many new ...

OPENALEX DOI: https://doi.org/10.1201/9781315272627

Effect of Welding Heat Input on Microstructure and Low-Temperature Toughness of Laser-Arc Hybrid Welded Super-Duplex Stainless-Steel Joints

Shuaimou Zhang, Liangliang Bao, Junhao Sun • Metals (2026)

This paper studies the effect of welding heat input on microstructure and low-temperature toughness of laser-arc hybrid welded (LAHW) SAF2507 super-duplex stainless-steel (SDSS) joints. Heat input was adjusted from 0.204 to 0.407 kJ/mm by c...

DOAJ Open Access (DOAJ) DOI: 10.3390/met16070787

Improvement in energy absorption properties of aluminum foams by designing pore-density distribution

Fateme Hassanli, Mohammad Hossein Paydar • Journal of Materials Research and Technology (2021)

In the present work, effect of structural design on the mechanical properties of aluminum foams was studied. Aluminum foams with a relative density in the range of 0.28–0.48 with uniform and graded pore frequency were fabricated through pow...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2021.06.073

The microwave-absorption properties and mechanism of phenyl silicone rubber/CIPs/graphene composites after thermal-aging in an elevated temperature

Xiao Yan, Jianhua Guo, Xinghua Jiang • Scientific Reports (2022)

Abstract Recently, the application and development of flexible microwave-absorption composites based on silicone rubber have gradually become a research hot spot. In this study, methyl vinyl phenyl silicone rubber (MPVQ)/carbonyl iron parti...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-022-08415-6

Fabrication and Properties of Iron-based Soft Magnetic Composites Coated with NiZnFe<sub>2</sub>O<sub>4</sub>

WU Shen, FAN Jiang-lei, LIU Jian-xiu, GAO Hong-xia et al. • Cailiao gongcheng (2017)

This paper focuses on iron-based soft magnetic composites which were synthesized by utilizing the sol-gel method prepared Ni-Zn ferrite particles as insulating compound to coat iron powder, and the influence of NiZnFe2O4 content and molding...

DOAJ Open Access (DOAJ) DOI: 10.11868/j.issn.1001-4381.2016.001428

Achieving high strength in 430 stainless steel by laser powder bed fusion: microstructure-property relationships and strengthening strategies

Junchen Li, Qiushuang Wang, Swee Leong Sing, Congwei Wang et al. • Virtual and Physical Prototyping (2026)

Conventional manufacturing of 430 ferritic stainless steel faces significant challenges, including severe work hardening, rapid tool wear, and limited strengthening via heat treatment. To overcome these limitations, this study employs laser...

DOAJ Open Access (DOAJ) DOI: 10.1080/17452759.2026.2631285

Manufacturing of Hierarchical (Nano-)Composite Structures: Numerical and Experimental Perspectives

Hatim Alotaibi, Constantinos Soutis, Masoud Jabbari • Applied Sciences (2026)

Thermoset polymer nanocomposites have considerable potential to improve the functionality and optimise the performance of composite structures. Such a nanocomposite generally consists of a modified polymer matrix (continuous phase) containi...

DOAJ Open Access (DOAJ) DOI: 10.3390/app162010379

Microstructure-based variational deep material networks for robust uncertainty quantification in materials digital twins

Andreas E. Robertson, Samuel B. Inman, Ashley T. Lenau, Ricardo A. Lebensohn et al. • npj Computational Materials (2026)

Abstract Aleatoric uncertainties – irremovable variability in microstructure morphology, constituent behavior, and processing conditions – pose a major challenge to developing uncertainty-robust digital twins. We introduce the Variational D...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41524-026-02054-5

Large datasets of water vapor sorption, mass diffusion immersed in water, hygroscopic expansion and mechanical properties of flax fibre/shape memory epoxy hygromorph composites

Qinyu Li, Rujie Sun, Antoine Le Duigou, Jianglong Guo et al. • Data in Brief (2022)

This data article presents four experimental sets of results related to flax fibre composites with epoxy shape memory polymer matrix: water vapor absorption, mass diffusion immersed in water, hygroscopic expansion, mechanical properties. Th...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.dib.2022.108367

DualSight: multi-stage instance segmentation framework for improved precision

Stephen Price, Kiran Judd, Kyle Tsaknopoulos, Rodica Neamtu et al. • Scientific Reports (2025)

Abstract Powder properties, particularly their morphology (which includes size, shape, surface roughness, etc.), play a critical role in the quality of cold spray additively manufactured materials. A change in feedstock powder morphology ca...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-025-09642-3

Potential of machine learning approaches for predicting mechanical properties of spruce wood in the transverse direction

Shuoye Chen, Rei Shiina, Kazushi Nakai, Tatsuya Awano et al. • Journal of Wood Science (2023)

Abstract To predict the mechanical properties of wood in the transverse direction, this study used machine learning to extract the anatomical features of wood from cross-sectional stereograms. Specimens with different orientations of the ra...

DOAJ Open Access (DOAJ) DOI: 10.1186/s10086-023-02096-z

Determining the Optimum Layer Combination for Cross-Laminated Timber Panels According to Timber Strength Classes Using Artificial Neural Networks

Engin Derya Gezer, Abdullah Uğur Birinci, Aydın Demir, Hasan Öztürk et al. • BioResources (2024)

The primary aim of this work was to determine the effects of production parameters, such as wood species and timber strength classes, on some mechanical properties of cross-laminated timber (CLT) panels using artificial neural network (ANN)...

DOAJ Open Access (DOAJ)

A 2D and 3D segmentation-based microstructure study on the role of brittle phases in diffusion brazed AISI 304L/NiCrSiFeMoB joints

Johannes L. Otto, Lukas M. Sauer, Malte Brink, Thorge Schaum et al. • Materials & Design (2023)

Nickel-based filler metals are frequently used in high temperature vacuum diffusion brazing for austenitic stainless-steel joints when components are subjected to high static or dynamic loads, corrosive environments and elevated temperature...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.matdes.2023.112401

Machine learning unifies the modeling of materials and molecules

Albert P. Bartók, Sandip De, Carl R. Poelking, Noam Bernstein et al. • Science Advances (2017)

Determining the stability of molecules and condensed phases is the cornerstone of atomistic modeling, underpinning our understanding of chemical and materials properties and transformations. We show that a machine-learning model, based on a...

OPENALEX cc-by-nc DOI: https://doi.org/10.1126/sciadv.1701816 PMC: 5729016