Reset
Showing 20 of 165 academic articles

Recipes for spinbased quantum computing

Verónica Cerletti, W. A. Coish, Oliver Gywat, Daniel Loss • Nanotechnology (2005)

Abstract. Technological growth in the electronics industry has historically been measured by the number of transistors that can be crammed onto a single microchip. Unfortunately, all good things must come to an end; spectacular growth in th...

OPENALEX Open Access DOI: https://doi.org/10.1088/0957-4484/16/4/r01

Quantum computing: A taxonomy, systematic review and future directions

Sukhpal Singh Gill, Adarsh Kumar, Harvinder Singh, Manmeet Singh et al. • Software Practice and Experience (2021)

Abstract Quantum computing (QC) is an emerging paradigm with the potential to offer significant computational advantage over conventional classical computing by exploiting quantum‐mechanical principles such as entanglement and superposition...

OPENALEX Open Access DOI: https://doi.org/10.1002/spe.3039

Verdi: a framework for implementing and formally verifying distributed systems

James R. Wilcox, Doug Woos, Pavel Panchekha, Zachary Tatlock et al. • ACM SIGPLAN Conference on Programming Language Design and Implementation (PLDI) (2015)

Distributed systems are difficult to implement correctly because they must handle both concurrency and failures: machines may crash at arbitrary points and networks may reorder, drop, or duplicate packets. Further, their behavior is often t...

OPENALEX Open Access DOI: https://doi.org/10.1145/2737924.2737958

A design method for booster motor of brake-by-wire system based on intelligent electric vehicle

Bumin Meng, Zhengzhao Zhou, Congyue Zhang, Feifan Yang • Green Energy and Intelligent Transportation (2023)

ABSTRACT: The brake-by-wire (BBW) system is an essential part of the intelligent electric vehicle, which is determination of the braking safety and recovery efficiency. To design a safe and efficient booster motor, the design of booster mot...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.geits.2023.100110

Advances in Materials Science and Engineering

Ying Zhang, Ping He • Trans Tech Publications Ltd. eBooks (2013)

The volume contains selected, peer reviewed papers from the 2012 International Conference on Advances in Materials Science and Engineering (AMSE 2012), December 9-10, 2012, Seoul, Korea. The papers are grouped as follows: Chapter 1: Materia...

OPENALEX DOI: https://doi.org/10.4028/b-uit6cc

Quantum computing with defects

Justin R. Weber, William F. Koehl, Joel Basile Varley, Anderson Janotti et al. • Proceedings of the National Academy of Sciences (2010)

Identifying and designing physical systems for use as qubits, the basic units of quantum information, are critical steps in the development of a quantum computer. Among the possibilities in the solid state, a defect in diamond known as the ...

OPENALEX Open Access DOI: https://doi.org/10.1073/pnas.1003052107 PMC: 2889300

Dendritic boron and nitrogen doped high-entropy alloy porous carbon fibers for high-efficiency hydrogen evolution reaction

Jin-Hua Liu, Jie Zheng, Mang Niu, Xuehao Li et al. • iScience (2024)

Summary: Among various electrocatalysts, high-entropy alloys (HEAs) have gained significant attention for their unique properties and excellent catalytic activity in the hydrogen evolution reaction (HER). However, the precise synthesis of H...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.isci.2024.109616

Simulation Study on Mechanical Characteristics of Rock Bolt in Rock Mass with Bedding Separation Based on the Nonlinear Bond Slip Relationship

Ning Li, Zhigang Du, Fuqiang Gao, Fuzhou Qi et al. • Geofluids (2022)

The mechanical equation on the mechanical characteristics of rock bolt in rock mass with bedding separation is established, based on the bond slip relationship of anchoring interface by the load transfer method. The validity of the numerica...

DOAJ Open Access (DOAJ) DOI: 10.1155/2022/5279884

Data Mining Techniques for Predictive Maintenance in Manufacturing Industries a Comprehensive Review

Chinthamu Narender, Ashish, P Mathiyalagan, B Devananda Rao et al. • ITM Web of Conferences (2025)

Predictive maintenance (PdM) is one of the major methods used in modern manufacturing to realize downtime minimization, lower the cost of maintenance and maximize machine service life by analyzing the collected data using data mining method...

DOAJ Open Access (DOAJ) DOI: 10.1051/itmconf/20257605012

Deep Learning and Autonomous Vehicles: Strategic Themes, Applications, and Research Agenda Using SciMAT and Content-Centric Analysis, a Systematic Review

Fábio Eid Morooka, Adalberto Manoel Junior, Tiago F. A. C. Sigahi, Jefferson de Souza Pinto et al. • Machine Learning and Knowledge Extraction (2023)

Applications of deep learning (DL) in autonomous vehicle (AV) projects have gained increasing interest from both researchers and companies. This has caused a rapid expansion of scientific production on DL-AV in recent years, encouraging res...

DOAJ Open Access (DOAJ) DOI: 10.3390/make5030041

Practical Vulnerability-Information-Sharing Architecture for Automotive Security-Risk Analysis

Yousik Lee, Samuel Woo, Yunkeun Song, Jungho Lee et al. • IEEE Access (2020)

Emerging trends that are shaping the future of the automotive industry include electrification, autonomous driving, sharing, and connectivity, and these trends keep changing annually. Thus, the automotive industry is shifting from mechanica...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2020.3004661

Materials Science for Engineers

J.C. Anderson, K. D. Leaver, Rees D. Rawlings, Patrick S. Leevers • CRC Press eBooks (2004)

This fifth edition of a successful textbook continues to provide students with an introduction to the basic principles of materials science over a broad range of topics. The authors have revised and updated this edition to include many new ...

OPENALEX DOI: https://doi.org/10.1201/9781315272627

Improvement in energy absorption properties of aluminum foams by designing pore-density distribution

Fateme Hassanli, Mohammad Hossein Paydar • Journal of Materials Research and Technology (2021)

In the present work, effect of structural design on the mechanical properties of aluminum foams was studied. Aluminum foams with a relative density in the range of 0.28–0.48 with uniform and graded pore frequency were fabricated through pow...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2021.06.073

Phase formations and microstructures of Ti20Zr15Hf15Ni35Cu15 high-entropy shape memory alloy under different aging conditions

Yen-Ting Chang, Ming-Hao Lee, Ming-Wen Chu, Chih-Hsuan Chen • Materials Today Advances (2022)

The microstructures and phase formations of Ti20Zr15Hf15Ni35Cu15 high entropy shape memory alloy (HESMA) under different aging conditions were investigated in this study. At aging temperatures below 500 °C, a large amount of the H-phase for...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.mtadv.2022.100223

Dynamic characteristics of a high-speed shaft-bearing-helical gear transmission system based on full-degree-of-freedom dynamics

Xuezhong Fu, Yutong Fu, Xiaotao Yang, Yuanxing Huang et al. • Engineering Science and Technology, an International Journal (2026)

To accurately evaluate the dynamic characteristics of helical gear transmission systems under high-speed operating conditions and to address the problem that the lumped parameter model fails to accurately reflect the system’s dynamic perfor...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jestch.2026.102360

Perceived Intensity and Discrimination Ability for Lingual Electrotactile Stimulation Depends on Location and Orientation of Electrodes

Leslie M. Stone-Roy, Joel Moritz Jr., Philip Turk, John D. Williams • Frontiers in Human Neuroscience (2017)

Malfunctioning sensory systems can severely impact quality of life and repair is not always possible. One solution, called sensory substitution, is to use another sensory system to bring lost information to the brain. This approach often in...

DOAJ Open Access (DOAJ) DOI: 10.3389/fnhum.2017.00186