Home »
Academic Articles & Research Papers
Showing 20 of 261 academic articles
Mohd Izrul Izwan RAMLI, Siti Farahnabilah MUHD AMLI, Norainiza SAUD, Dewi Suriyani CHE HALIN et al. • European Journal of Materials Science and Engineering
(2023)
Hot Air Solder Leveling (HASL) is one of the most commonly used surface finishes in the industry. HASL is also one of the least expensive types of PCB surface finishes available. This study aims to examine the influence on the solder joint ...
DOAJ
Open Access (DOAJ)
DOI: 10.36868/ejmse.2023.08.01.030
Fuat ERDEN, İshak KARAKAYA, Metehan ERDOĞAN • International Journal of Electrochemical Science
(2014)
Mg2Ni is a well-known hydrogen storage alloy. Most of the preparative methods for this alloy require high temperature processing of pure magnesium and nickel. The proposed method, studied in this work, involves the production of Mg2Ni alloy...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/S1452-3981(23)10915-1
Yi Yu, Ran Peng, Zihe Chen, Li Yu et al. • Advanced Intelligent Systems
(2021)
Soft robots, intelligent structures built up of smart soft materials, are capable of being programmed to perform delicate work. Recently, plenty of biomimetic soft robots with functionalities of grasping, sensing, searching, and transportin...
DOAJ
Open Access (DOAJ)
DOI: 10.1002/aisy.202100012
ZHANG Sen, LIU Yi, SU Xiaolei, LI Yunyu et al. • Xi'an Gongcheng Daxue xuebao
(2022)
In order to improve the microwave absorption performance of TiC powder, TiC/Ni composite powder was prepared by coating nickel particles with mass fraction of 10%, 20% and 30% on the surface of TiC by typical coarsening and sensitizing elec...
DOAJ
Open Access (DOAJ)
DOI: 10.13338/j.issn.1674-649x.2022.01.005
Jon Mikel Sanchez, Iban Vicario, Joseba Albizuri, Teresa Guraya et al. • Journal of Materials Research and Technology
(2019)
Guided by CALPHAD modeling, low-density and multiphase three novel High Entropy Alloys (HEAs), Al40Cu15Cr15Fe15Si15, Al65Cu5Cr5Si15Mn5Ti5 and Al60Cu10Fe10Cr5Mn5Ni5Mg5 were produced by large scale vacuum die casting. A mixture of simple and ...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2018.06.010
Minglong Kang, Li Zhou, Yunlai Deng, Jinqin Lei • Advances in Materials Science and Engineering
(2021)
Multilayer brazeable aluminum alloy sheet is prone to collapse during high-temperature brazing process. The sagging resistance of the aluminum composite sheet needs to be further improved for quality control. Effects of annealing and rate o...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2021/6625548
Milton Ohring • Elsevier eBooks
(2002)
OPENALEX
DOI: https://doi.org/10.1016/b978-012524975-1/50004-5
• Elsevier eBooks
(1974)
OPENALEX
DOI: https://doi.org/10.1016/b978-0-12-587802-9.50001-5
William D. Callister, David G. Rethwisch (2007)
Chapter 1 - Introduction. 1.1 Historical Perspective 1.2 Materials Science and Engineering 1.3 Why Study Materials Science and Engineering? 1.4 Classification of Materials Materials of Importance-Carbonated Beverage Containers 1.5 Advanced ...
OPENALEX
National Research Council • National Academies Press eBooks
(1999)
OPENALEX
DOI: https://doi.org/10.17226/9718
José Miguel Aguilera, Peter J. Lillford • Springer eBooks
(2007)
OPENALEX
DOI: https://doi.org/10.1007/978-0-387-71947-4
William F. Smith (1993)
1 Introduction to Materials Science and Engineering 2 Atomic Structure and Bonding 3 Crystal and Amorphous Structures in Materials 4 Solidification, Crystalline Imperfections 5 Thermally Activated Processes and Diffusion in Solids 6 Mechani...
OPENALEX
Robert Wolfgang Cahn, P. Haasen, Edward J. Krämer • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde)
(1993)
OPENALEX
DOI: https://doi.org/10.1515/ijmr-1993-840206
Günter Gottstein • Springer eBooks
(2004)
OPENALEX
DOI: https://doi.org/10.1007/978-3-662-09291-0
Kaoru Ohno, Keivan Esfarjani, Yoshiyuki Kawazoe • Springer series in solid-state sciences
(1999)
There has been much progress in the computational approaches in the field of materials science during the past two decades. In particular, computer simula tion has become a very important tool in this...
OPENALEX
Open Access
DOI: https://doi.org/10.1007/978-3-642-59859-3
Ying Zhang, Ping He • Trans Tech Publications Ltd. eBooks
(2013)
The volume contains selected, peer reviewed papers from the 2012 International Conference on Advances in Materials Science and Engineering (AMSE 2012), December 9-10, 2012, Seoul, Korea. The papers are grouped as follows: Chapter 1: Materia...
OPENALEX
DOI: https://doi.org/10.4028/b-uit6cc
Michael B. Bever, C. B. Duke • Physics Today
(1987)
This major eight-volume reference work provides the first unified treatment of an important interdisciplinary field....
OPENALEX
DOI: https://doi.org/10.1063/1.2819952
William D. Callister (1985)
List of Symbols.Introduction.Atomic Structure and Interatomic Bonding.The Structure of Crystalline Solids.Imperfections in Solids.Diffusion.Mechanical Properties of Metals.Dislocations and Strengthening Mechanisms.Failure.Phase Diagrams.Pha...
OPENALEX
Publisher Kunderi Mahaboob • ADVANCED SCIENCES INDEX
(2014)
The Journal of Materials Science and Engineering is an international, scholarly, and peer-reviewed journal (print and online) published monthly by David Publishing Company, USA which was founded in 2007. It provides an international medium ...
OPENALEX
Vera von Burg, Guang Hao Low, Thomas Häner, Damian S. Steiger et al. • Physical Review Research
(2021)
The quantum computation of electronic energies can break the curse of dimensionality that plagues manyparticle quantum mechanics.It is for this reason that a universal quantum computer has the potential to fundamentally change computational...
OPENALEX
cc-by
DOI: https://doi.org/10.1103/physrevresearch.3.033055