Reset
Showing 15 of 15 academic articles

Study of the corrosion properties of powder rolled Ti–6Al–4V alloy applied in the biomedical implants

Mandlenkosi G.R. Mahlobo, Lethu Chikosha, Peter A. Olubambi • Journal of Materials Research and Technology (2022)

Great efforts have been made in fabricating Ti–6Al–4V alloys that can be used in the biomedical implants industry. The increasing interest in using fabricated Ti–6Al–4V alloys in industrial applications is mainly due to the properties of al...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2022.04.004

A Probabilistic Fatigue Strength Assessment in AlSi-Cast Material by a Layer-Based Approach

Matthias Oberreiter, Stefan Fladischer, Michael Stoschka, Martin Leitner • Metals (2022)

An advanced lightweight design in cast aluminium alloys features complexly shaped geometries with strongly varying local casting process conditions. This affects the local microstructure in terms of porosity grade and secondary dendrite arm...

DOAJ Open Access (DOAJ) DOI: 10.3390/met12050784

Effects of electron beam welding on the microstructure and impact properties of three reconstituted steels

HU Minglei, HU Bin, ZHANG Wei, LIU Xiaoou et al. • Fenmo yejin jishu (2025)

Specimen reconstitution technology is important for the in-service safety of reactor pressure vessels (RPVs) in nuclear power plants. To verify the feasibility of electron beam welding for the restructured specimens, the electron beam weldi...

DOAJ Open Access (DOAJ) DOI: 10.19591/j.cnki.cn11-1974/tf.2024070004

Effect of Prior Rolling on Microstructures and Property of Diffusion-Bonded Mg/Al Alloy

Yunlong Ding, Jialian Shi, Dongying Ju • Advances in Materials Science and Engineering (2019)

In this study, magnesium alloy AZ91, which was cast by double roll casting system, was rolled by a rolling mill. Then, rolled magnesium alloy and magnesium alloy without being rolled were, respectively, welded with aluminum alloy 6061 by di...

DOAJ Open Access (DOAJ) DOI: 10.1155/2019/4535984

Investigation of Microstructure and Mechanical Behavior of Nanomodified Cement-Based Materials

Spyridoula G. Farmaki, Dimitrios A. Exarchos, Vasileios Dracopoulos, Anastasios Gkotzamanis et al. • Applied Mechanics (2026)

Recent advances in nanotechnology have highlighted the transformative potential of carbon-based nanomaterials, such as carbon nanofibers, carbon nanotubes, and graphene, in cementitious systems. These materials have shown a remarkable abili...

DOAJ Open Access (DOAJ) DOI: 10.3390/applmech7010013

Impact of biomass ash content on biocomposite properties

Xianhui Zhao, Oluwafemi Oyedeji, Erin Webb, Sanjita Wasti et al. • Composites Part C: Open Access (2022)

Owing to its low cost and sustainable nature, lignocellulosic biomass has been utilized for reinforcing polymers, but it is crucial to understand the impact of high-ash concentrations in biomass on composite strength and processing. Biomass...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jcomc.2022.100319

Feasibility of Residual Stress Nondestructive Estimation Using the Nonlinear Property of Critical Refraction Longitudinal Wave

Yu-Hua Zhang, Xin-Xin Li, Xiang-Hong Wang, Zhen-Feng Huang et al. • Advances in Materials Science and Engineering (2017)

Residual stress has significant influence on the performance of mechanical components, and the nondestructive estimation of residual stress is always a difficult problem. This study applies the relative nonlinear coefficient of critical ref...

DOAJ Open Access (DOAJ) DOI: 10.1155/2017/6274054

Review of Supramolecular Oleogel Lubricants

Lei Wei, Minghui Xiong, Haoye Wang, Yuelin Chen et al. • Gels (2026)

Supramolecular oleogel lubricants construct a three-dimensional network structure within base oils through gelator-mediated non-covalent interactions, such as hydrogen bonding, van der Waals forces, and π–π stacking. These materials demonst...

DOAJ Open Access (DOAJ) DOI: 10.3390/gels12040338

Tribological and flexural characterization of dissimilar AA2024-T3/AA6082-T6 friction stir welded joints

Paritosh Mishra, Brijesh Prasad, Sunil Chamoli, Ibrahim M. Alarifi • Journal of Materials Research and Technology (2026)

The escalating demand for lightweight, high-strength structures in the aerospace and automotive sectors necessitates robust joining technologies for dissimilar aluminium alloys. This study systematically investigates the effects of friction...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2026.08.256

Achieving high strength in 430 stainless steel by laser powder bed fusion: microstructure-property relationships and strengthening strategies

Junchen Li, Qiushuang Wang, Swee Leong Sing, Congwei Wang et al. • Virtual and Physical Prototyping (2026)

Conventional manufacturing of 430 ferritic stainless steel faces significant challenges, including severe work hardening, rapid tool wear, and limited strengthening via heat treatment. To overcome these limitations, this study employs laser...

DOAJ Open Access (DOAJ) DOI: 10.1080/17452759.2026.2631285

A 2D and 3D segmentation-based microstructure study on the role of brittle phases in diffusion brazed AISI 304L/NiCrSiFeMoB joints

Johannes L. Otto, Lukas M. Sauer, Malte Brink, Thorge Schaum et al. • Materials & Design (2023)

Nickel-based filler metals are frequently used in high temperature vacuum diffusion brazing for austenitic stainless-steel joints when components are subjected to high static or dynamic loads, corrosive environments and elevated temperature...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.matdes.2023.112401

Artificial Neural Network (ANN) Approach to Predict Tensile Properties of Longitudinally Placed Fiber Reinforced Polymeric Composites including Interphase

Sagar Chokshi, Piyush Gohil, Vijay Parmar, Vijaykumar Chaudhary • Mechanics of Advanced Composite Structures (2025)

Machine Learning has become prevalent nowadays for predicting data on the mechanical properties of various materials and is widely used in various polymeric applications. In the present study, Artificial Neural Network (ANN), a computationa...

DOAJ Open Access (DOAJ) DOI: 10.22075/macs.2024.33874.1664

A Double Sky-Hook Algorithm for Improving Road-Holding Property in Semi-Active Suspension Systems for Application to In-Wheel Motor

Seunghoon Woo, Donghoon Shin • Applied Sciences (2021)

This paper presents a double sky-hook algorithm for controlling semi-active suspension systems in order to improve road-holding property for application in an in-wheel motor. The main disadvantage of the in-wheel motor is the increase in un...

DOAJ Open Access (DOAJ) DOI: 10.3390/app11198912