Reset
Showing 5 of 5 academic articles

Characterization of thermally treated polypropylene powders with wide sintering window for powder bed fusion of polymers

Xiaodi Gong, Xia Gao, Ning Yu, Daijun Zhang et al. • Polymer Testing (2021)

One key issue restricting semi-crystalline polymers to be widely applied in powder bed fusion (PBF) of polymers is lack of good powder processability, especially a wide sintering window. In this work, a thermal treatment method with mixed d...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.polymertesting.2021.107078

3D Printing parameter optimisation combined with heat treatment for achieving high density and enhanced performance in refractory high-entropy alloys

Deyu Jiang, Miao Luo, Changxi Liu, Yashuo Zhang et al. • Virtual and Physical Prototyping (2025)

In this study, a Ti1.5Nb1Ta0.5Zr1Mo0.5 (TNTZM) high-entropy alloy was fabricated using laser powder bed fusion (LPBF). By integrating 63 sets of parameter trials with machine learning (ML) models, an optimised process window was identified,...

DOAJ Open Access (DOAJ) DOI: 10.1080/17452759.2025.2524524

Compression and Tensile Testing of L-PBF Ti-6Al-4V Lattice Structures with Biomimetic Porosities and Strut Geometries for Orthopedic Implants

Dimitri P. Papazoglou, Amy T. Neidhard-Doll, Margaret F. Pinnell, Dathan S. Erdahl et al. • Metals (2024)

In an effort to contribute to the ongoing development of ASTM standards for additively manufactured metal lattice specimens, particularly within the field of medicine, the compressive and tensile mechanical properties of biomimetic lattice ...

DOAJ Open Access (DOAJ) DOI: 10.3390/met14020232

Effect of heat treatment on the microstructure and corrosion resistance of laser powder bed fusion ODS-316L

Qian Zheng, Chao Lu, Yan Yin, Xiaoli Cui et al. • Journal of Materials Research and Technology (2025)

As a candidate cladding material for fourth-generation nuclear energy systems, the microstructure and properties of oxide dispersion strengthened 316L (ODS-316L) steel are significantly affected by heat treatment (HT) processes. This paper ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2025.09.256

Achieving high strength in 430 stainless steel by laser powder bed fusion: microstructure-property relationships and strengthening strategies

Junchen Li, Qiushuang Wang, Swee Leong Sing, Congwei Wang et al. • Virtual and Physical Prototyping (2026)

Conventional manufacturing of 430 ferritic stainless steel faces significant challenges, including severe work hardening, rapid tool wear, and limited strengthening via heat treatment. To overcome these limitations, this study employs laser...

DOAJ Open Access (DOAJ) DOI: 10.1080/17452759.2026.2631285