Reset
Showing 20 of 46 academic articles

Study of the corrosion properties of powder rolled Ti–6Al–4V alloy applied in the biomedical implants

Mandlenkosi G.R. Mahlobo, Lethu Chikosha, Peter A. Olubambi • Journal of Materials Research and Technology (2022)

Great efforts have been made in fabricating Ti–6Al–4V alloys that can be used in the biomedical implants industry. The increasing interest in using fabricated Ti–6Al–4V alloys in industrial applications is mainly due to the properties of al...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2022.04.004

Soft x-ray high-harmonic generation in an anti-resonant hollow core fiber driven by a 3 μm ultrafast laser

D. Morrill, W. Hettel, D. Carlson, B. Shearer et al. • APL Photonics (2025)

High-harmonic upconversion driven by a mid-infrared femtosecond laser can generate coherent soft x-ray beams in a tabletop-scale setup. Here, we report on a compact ytterbium-pumped optical parametric chirped pulse amplifier (OPCPA) laser s...

DOAJ Open Access (DOAJ) DOI: 10.1063/5.0292771

Investigation of the Structural, Electrical, and Optical Properties of the Nano-Scale GZO Thin Films on Glass and Flexible Polyimide Substrates

Fang-Hsing Wang, Kun-Neng Chen, Chao-Ming Hsu, Min-Chu Liu et al. • Nanomaterials (2016)

In this study, Ga2O3-doped ZnO (GZO) thin films were deposited on glass and flexible polyimide (PI) substrates at room temperature (300 K), 373 K, and 473 K by the radio frequency (RF) magnetron sputtering method. After finding the depositi...

DOAJ Open Access (DOAJ) DOI: 10.3390/nano6050088

Effect of Corrosion Product Films Induced by Tensile Stress on P110 Casing Steels Induced in CO2 Environment

Yangzhong Jing, Shuliang Wang, Yuyao Chen, Mingyu Bao et al. • International Journal of Electrochemical Science (2018)

Corrosion product films were formed on P110 casing steels by high-temperature and high-pressure autoclave in a CO2 environment induced by tensile stress. The effects of applied tensile stress on the protection characteristics and electroche...

DOAJ Open Access (DOAJ) DOI: 10.20964/2018.08.21

Properties of aniline or O-phenylenediamine/YBCO hybrid materials

LIN Shan, YUAN Hong-mei, WANG Dong, CHEN Shu-qing et al. • Cailiao gongcheng (2021)

YBa2Cu3O7-δ(YBCO) bulk material prepared by high temperature solid state reaction was milled and dispersed through ultrasonic process in ethanol to prepare nanoscale YBCO/ethanol sol. Then it was mixed with aniline or O-phenylenediamine and...

DOAJ Open Access (DOAJ) DOI: 10.11868/j.issn.1001-4381.2019.000902

High-temperature Infrared Transmission of Free-standing Diamond Films

HEI Li-fu, YAN Xiong-bo, ZHU Rui-hua, CHEN Liang-xian et al. • Cailiao gongcheng (2017)

The combination of low absorption and extreme mechanical and thermal properties make diamond a compelling choice for some more extreme far infrared (8-12 μm) window applications. The optical properties of CVD diamond at elevated temperature...

DOAJ Open Access (DOAJ) DOI: 10.11868/j.issn.1001-4381.2016.000792

Extraction of nano-crystalline cellulose for development of aerogel: Structural, morphological and antibacterial analysis

Yash Vishnoi, Alok Kumar Trivedi, M.K. Gupta, Harinder Singh et al. • Heliyon (2024)

In the present decades, nanocellulose has been very popular in the field of nanotechnology and is receiving much attention from researchers because of its advantageous physicochemical properties, high aspect ratio, and high specific strengt...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.heliyon.2023.e23846

Altered electrochemical properties of iron oxide nanoparticles by carbon enhance molecular biocompatibility through discrepant atomic interaction

S.K. Verma, A. Thirumurugan, P.K. Panda, P. Patel et al. • Materials Today Bio (2021)

Recent advancement in nanotechnology seeks exploration of new techniques for improvement in the molecular, chemical, and biological properties of nanoparticles. In this study, carbon modification of octahedral-shaped magnetic nanoparticles ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.mtbio.2021.100131

Preparation, Characterization and Mimetic Activities of Fe2O3 and Fe3O4 Nanoparticles as Catalase and Peroxidase

Alaa Majeed, Rashed Rasheed • Journal of Applied Sciences and Nanotechnology (2022)

Different iron oxide nanoparticles (Fe3O4 and Fe2O3) were prepared by the sol-gel method (titration). The prepared nanoparticles were heated at 90 and 400°C. The morphology surface and structures were characterized by Fourier Transform Infr...

DOAJ Open Access (DOAJ) DOI: 10.53293/jasn.2022.4574.1127

Study of the Effect of Laser Energy on the Structural and Optical Properties of TiO2 NPs Prepared by PLAL Technique

Israa Hasan, Khawla Khashan, Aseel Hadi • Journal of Applied Sciences and Nanotechnology (2022)

Titanium dioxide nanoparticles were produced in this work by laser ablation of a high purity titanium objective immersed in distilled water. Optical and structural properties of the obtained TiO2 NPs using a Q-switched Nd: YAG laser of 1064...

DOAJ Open Access (DOAJ) DOI: 10.53293/jasn.2021.3600.1031

Improved production of titanate nanotubes by hydrothermal method for adsorption of organic dyes

Ayman H. Zaki, Sara Adel, Mahmoud M. Abd El-hafiez, Ahmed A. Abdel-Khalek • Beni-Suef University Journal of Basic and Applied Sciences (2021)

Abstract Background Increasing the yield of nanomaterials using the same reactor size and fixing most of the reactants and conditions will greatly improve the production process by saving time, energy and efforts. Titanate nanotubes are mai...

DOAJ Open Access (DOAJ) DOI: 10.1186/s43088-021-00175-y

Synergistic heterojunction effects in Ag3PO4/SnO2 nanocomposites: a photocatalytic study on isoproturon degradation

Rishi Ram, Bhawna, Sanjeev Kumar, Akanksha Gupta et al. • Frontiers in Bioengineering and Biotechnology (2025)

IntroductionPesticides such as isoproturon are widely employed and represent a considerable environmental concern. The development of sustainable and efficient degrading techniques is crucial. Photocatalytic degradation employing semiconduc...

DOAJ Open Access (DOAJ) DOI: 10.3389/fbioe.2025.1458965

Recent advances in the Biosynthesis of Zirconium Oxide Nanoparticles and their Biological Applications

Salam S Alsharari, Muneefah A. Alenezi, Mona S. Al Tami, Mohammed Soliman • مجلة بغداد للعلوم (2023)

A critical milestone in nano-biotechnology is establishing reliable and ecological friendly methods for fabricating metal oxide NPs. Because of their great biodegradable, electrical, mechanical, and optical qualities, zirconia NPs (ZrO2NPs)...

DOAJ Open Access (DOAJ) DOI: 10.21123/bsj.2022.7055

Green synthesis of silver nanoparticles using terrestrial fern (Gleichenia Pectinata (Willd.) C. Presl.): characterization and antimicrobial studies

Abiola Grace Femi-Adepoju, Adewumi Oluwasogo Dada, Kabir Opeyemi Otun, Adeyinka Olufemi Adepoju et al. • Heliyon (2019)

Novel silver nanoparticles from Gleichenia Pectinata (Willd.) C. Presl. was synthesized. A combination of spectroscopic and microscopic techniques were utilized to characterize the newly synthesized Gleichenia Pectinata Silver Nanoparticles...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.heliyon.2019.e01543

New hydroperoxylated and 20,24-epoxylated dammarane triterpenes from the rot roots of Panax notoginseng

Jia-Huan Shang, Wen-Jie Sun, Hong-Tao Zhu, Dong Wang et al. • Journal of Ginseng Research (2020)

Background: Root rot is a serious destructive disease of Panax notoginseng, a famous cultivated araliaceous herb called Sanqi or Tianqi in Southwest China. Methods: The chemical substances of Sanqi rot roots were explored by chromatographic...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jgr.2019.01.008

Uranyl Nitrates: By-Products of the Synthetic Experiments or Key Indicators of the Reaction Progress?

Vladislav V. Gurzhiy, Olga S. Tyumentseva, Ilya V. Kornyakov • Crystals (2020)

Six novel uranyl nitrate compounds K3[(UO2)(NO3)Cl3](NO3) (1, 2), α-Cs2[(UO2)(NO3)Cl3] (3), [(UO2)(NO3)2(H2O)2][(CH3NH3)2(NO3)2] (4), Cs2[(UO2)(NO3)4] (5), and [(UO2)2(OH)2(NO3)2(H2O)3](H2O) (6) have been prepared from aqueous solutions. Th...

DOAJ Open Access (DOAJ) DOI: 10.3390/cryst10121122

Characterization of thermally treated polypropylene powders with wide sintering window for powder bed fusion of polymers

Xiaodi Gong, Xia Gao, Ning Yu, Daijun Zhang et al. • Polymer Testing (2021)

One key issue restricting semi-crystalline polymers to be widely applied in powder bed fusion (PBF) of polymers is lack of good powder processability, especially a wide sintering window. In this work, a thermal treatment method with mixed d...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.polymertesting.2021.107078

The Effect of Time on the Activation of Bayah Natural Zeolite for Application of Palm Oil Shell Pyrolysis

Endang Suhendi, Teguh Kurniawan, Adian Yoga Pradana, Vicky Zayan Giffari • Bulletin of Chemical Reaction Engineering & Catalysis (2021)

Oil palm shell (OPS) constitutes 60% of the waste generated during the processing of palm oil. However, OPS can potentially be converted into energy and chemicals through pyrolysis. The purpose of this study is to determine and analyse the ...

DOAJ Open Access (DOAJ) DOI: 10.9767/bcrec.16.3.10313.588-600

Volcanic Pozzolan from the Phlegraean Fields in the Structural Mortars of the Roman Temple of Nora (Sardinia)

Simone Dilaria, Caterina Previato, Jacopo Bonetto, Michele Secco et al. • Heritage (2023)

In this paper, we discuss the presence of volcanic pozzolans in the structural mortars of the Roman Temple of Nora in Sardinia (3rd c. AD), represented by pyroclastic rocks (pumices and tuffs) employed as coarse and fine aggregates. The pro...

DOAJ Open Access (DOAJ) DOI: 10.3390/heritage6010030