Reset
Showing 18 of 18 academic articles

Experimental study on the factors influencing performance and emissions of hydrogen internal combustion engines

Wu Taoyang, Liu Jixu, Wu Chunling, Jing Xiaojun et al. • E3S Web of Conferences (2024)

Hydrogen internal combustion engines (H2-ICEs) have advantages such as clean combustion and zero carbon emissions, and have become one of the important technical routes for decarbonization in the internal combustion engine industry. In this...

DOAJ Open Access (DOAJ) DOI: 10.1051/e3sconf/202452201009

EFFECT OF COVID-19 ON PSYCHOSOCIAL BEHAVIOUR OF AUTOMOBILE WORKERS PERFORMANCE - AN ERGONOMIC STUDY

Syam Babu Bokka, Anil Kumar Birru, Amandeep Kaur, Netai Chandr Dey et al. • Proceedings on Engineering Sciences (2024)

The COVID-19 lockdown has had a significant negative impact on the automotive industry, particularly on the small and medium-sized businesses and daily wage workers who rely on autonagar industrial area as their main source of income. Emplo...

DOAJ Open Access (DOAJ) DOI: 10.24874/PES.SI.25.03b.010

Investigation of the Friction Performance of G3000 (Variant), GG20, and GG15 (High Carbon) Cast Brake Discs Using the SAE J2522 Procedure

Talha İkbal Çığır, Melih Hakan Samur, Mevlüt Yasin Igdeli • International Journal of Automotive Science and Technology (2025)

This study compares the friction performance of three commonly used cast brake disc materials in the automotive industry: the G3000 variant, GG20, and GG15 (high carbon content). Samples were tested on an inertia dynamometer following the S...

DOAJ Open Access (DOAJ) DOI: 10.30939/ijastech..1811564

A study on the Joule-Thomson effect of during filling hydrogen in high pressure tank

Ji-Qiang Li, Yan Chen, Yong Biao Ma, Jeong-Tae Kwon et al. • Case Studies in Thermal Engineering (2023)

With the development of the hydrogen fuel cell automobile industry, higher requirements are put forward for the construction of hydrogen energy infrastructure, the matching of parameters and the control strategy of hydrogen filling rate in ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.csite.2022.102678

CSR and CEO’s Moral Reasoning in the Automotive Industry in the Era of COVID-19

Beatriz Garcia-Ortega, Javier Galan-Cubillo, Blanca de-Miguel-Molina • SAGE Open (2022)

This paper assesses whether and to which extent the COVID-19 pandemic, which represents a scenario of high moral intensity, is influencing the moral reasoning of top CEOs (chief executive officers) in the paradigmatic case of the automotive...

DOAJ Open Access (DOAJ) DOI: 10.1177/21582440221097377

Analysis and optimal design of low frequency road noise based on new energy MPV vehicle

BIN Shibo; XIE Yunhe; ZHENG Weiguang; WEI Shangjun; GAO Ting; LIU Xuewen • Nantong Daxue xuebao. Ziran kexue ban (2025)

Low-frequency road noise is a primary contributor to in-cabin noise and directly affects overall vehicle comfort. With the rapid development of electric vehicles, this issue has attracted increasing attention from the automotive industry. T...

DOAJ Open Access (DOAJ) DOI: 10.12194/j.ntu.20240724001

Manufacturing of a New Generations from the Recycled AL Scrape Reinforced with AL2O3 - GNS Composite Powder by Vortex Technique for Automotive Spare Parts

Fathei Nouh, Omayma El kady, Sabry abdel aziz • International Journal of Industry and Sustainable Development (2024)

This research addresses the urgent challenges facing the materials and metallurgical industries, driving manufacturers to seek innovative solutions for material recycling. Aluminum scrape in used to manufacture a composite material with a h...

DOAJ Open Access (DOAJ) DOI: 10.21608/ijisd.2024.302067.1074

Industry quantum computing applications

Andreas Bayerstadler, Guillaume Becquin, Julia Binder, Thierry Botter et al. • EPJ Quantum Technology (2021)

Abstract Quantum computing promises to overcome computational limitations with better and faster solutions for optimization, simulation, and machine learning problems. Europe and Germany are in the process of successfully establishing resea...

OPENALEX cc-by DOI: https://doi.org/10.1140/epjqt/s40507-021-00114-x

Challenges in automotive software engineering

Manfred Broy • ACM/IEEE International Conference on Software Engineering: Companion Proceedings (ICSE-Companion) (2006)

The amount of software in cars grows exponentially. Driving forces of this development are cheaper and more powerful hardware and the demand for innovations by new functions. The rapid increase of software and software based functionality b...

OPENALEX DOI: https://doi.org/10.1145/1134285.1134292

Practical Vulnerability-Information-Sharing Architecture for Automotive Security-Risk Analysis

Yousik Lee, Samuel Woo, Yunkeun Song, Jungho Lee et al. • IEEE Access (2020)

Emerging trends that are shaping the future of the automotive industry include electrification, autonomous driving, sharing, and connectivity, and these trends keep changing annually. Thus, the automotive industry is shifting from mechanica...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2020.3004661

THE APPLICATION OF SOLAR ENERGY IN ROMANIA’S AUTOMOTIVE FIELD

Alexandra COROIAN, Larisa IVASCU, Timea CISMA, Mihai ARDELEAN et al. • Annals: Series on engineering sciences (Academy of Romanian Scientists) (2024)

Romania's automotive sector is experiencing an evolution towards sustainable transport, with an increasing interest in incorporating solar power technology into vehicles. This article examines the present state of solar power use in Roman...

DOAJ Open Access (DOAJ) DOI: 10.56082/ANNALSARSCIENG.2024.2.41

Edge AI for Industrial Visual Inspection: YOLOv8-Based Visual Conformity Detection Using Raspberry Pi

Marcelo T. Okano, William Aparecido Celestino Lopes, Sergio Miele Ruggero, Oduvaldo Vendrametto et al. • Algorithms (2025)

This paper presents a lightweight and cost-effective computer vision solution for automated industrial inspection using You Only Look Once (YOLO) v8 models deployed on embedded systems. The YOLOv8 Nano model, trained for 200 epochs, achieve...

DOAJ Open Access (DOAJ) DOI: 10.3390/a18080510

Compilation of training datasets for use of convolutional neural networks supporting automatic inspection processes in industry 4.0 based electronic manufacturing

A. I. M. Schwebig, A. I. M. Schwebig, R. Tutsch • Journal of Sensors and Sensor Systems (2020)

Ensuring the highest quality standards at competitive prices is one of the greatest challenges in the manufacture of electronic products. The identification of flaws has the uppermost priority in the field of automotive electronics, particu...

DOAJ Open Access (DOAJ) DOI: 10.5194/jsss-9-167-2020

A Survey on Deep Learning for Steering Angle Prediction in Autonomous Vehicles

Usman Manzo Gidado, Haruna Chiroma, Nahla Aljojo, Saidu Abubakar et al. • IEEE Access (2020)

Steering angle prediction is critical in the control of Autonomous Vehicles (AVs) and has attracted the attention of researchers, manufacturers, and insurance companies in the automotive industry. Different Deep Learning (DL) architectures ...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2020.3017883