Reset
Showing 20 of 43 academic articles

Study of the corrosion properties of powder rolled Ti–6Al–4V alloy applied in the biomedical implants

Mandlenkosi G.R. Mahlobo, Lethu Chikosha, Peter A. Olubambi • Journal of Materials Research and Technology (2022)

Great efforts have been made in fabricating Ti–6Al–4V alloys that can be used in the biomedical implants industry. The increasing interest in using fabricated Ti–6Al–4V alloys in industrial applications is mainly due to the properties of al...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2022.04.004

Advances in genetics

M. Demerec, Ernst W. Caspari, John Marion Thoday, John G. Scandalios et al. • Advances in genetics (1947)

Advances in Genetics provides the latest information on the rapidly evolving field of genetics, presenting new medical breakthroughs that are occurring as a result of advances in our knowledge of the topic. The book continually publishes im...

OPENALEX

Research progress of automated ultrasonic imaging detection technology for complex aircraft components

CHEN Yao, XIONG Zhenghui, LUO Junwei, WANG Hanyang et al. • Journal of Aeronautical Materials (2025)

Traditional ultrasonic automated non-destructive testing is a great challenge in the inspection of aviation components with complex surfaces. Complex surfaces can interfere with the formation of the focus in the sound beam,and the waveform ...

DOAJ Open Access (DOAJ) DOI: 10.11868/j.issn.1005-5053.2024.000173

Effect of Prior Rolling on Microstructures and Property of Diffusion-Bonded Mg/Al Alloy

Yunlong Ding, Jialian Shi, Dongying Ju • Advances in Materials Science and Engineering (2019)

In this study, magnesium alloy AZ91, which was cast by double roll casting system, was rolled by a rolling mill. Then, rolled magnesium alloy and magnesium alloy without being rolled were, respectively, welded with aluminum alloy 6061 by di...

DOAJ Open Access (DOAJ) DOI: 10.1155/2019/4535984

Morphological dependent Indium incorporation in InGaN/GaN multiple quantum wells structure grown on 4° misoriented sapphire substrate

Teng Jiang, Shengrui Xu, Jincheng Zhang, Peixian Li et al. • AIP Advances (2016)

The epitaxial layers of InGaN/GaN MQWs structure were grown on both planar and vicinal sapphire substrates by metal organic chemical vapor deposition. By comparing the epitaxial layers grown on planar substrate, the sample grown on 4° misor...

DOAJ Open Access (DOAJ) DOI: 10.1063/1.4944862

Preparation, Characterization and Mimetic Activities of Fe2O3 and Fe3O4 Nanoparticles as Catalase and Peroxidase

Alaa Majeed, Rashed Rasheed • Journal of Applied Sciences and Nanotechnology (2022)

Different iron oxide nanoparticles (Fe3O4 and Fe2O3) were prepared by the sol-gel method (titration). The prepared nanoparticles were heated at 90 and 400°C. The morphology surface and structures were characterized by Fourier Transform Infr...

DOAJ Open Access (DOAJ) DOI: 10.53293/jasn.2022.4574.1127

The Water-Based Synthesis of Platinum Nanoparticles Using KrF Excimer Laser Ablation

Oana Andreea Lazar, Călin Constantin Moise, Anastas Savov Nikolov, Laura-Bianca Enache et al. • Nanomaterials (2022)

Our work presents, for the first time, a comprehensive study of the synthesis of fully metallic platinum nanoparticles (Pt-NPs) involving the ablation process in double distilled water using a KrF excimer laser. To obtain detailed informati...

DOAJ Open Access (DOAJ) DOI: 10.3390/nano12030348

Analytical Chemistry Methods of Estimating the Original Firing Temperature of Bricks from a 19th Century Convent in the Philippines: Perspective of a Southeast Asian Country | Mga Pamamaraan ng Mapanuring-Kimika sa Pagtantya ng Orihinal na Temperatura ng Pagsunog sa Ladrilyo Mula sa Isang Ika-19 na Siglong Kumbento sa Pilipinas: Pananaw ng Isang Bansa sa Timog-Silangang Asya

Jan-Michael Cayme • SPAFA Journal (2021)

Countries in Southeast Asia have a unique and diverse culture due to its varied ethnic groups having different traditions and beliefs. The process of manufacturing building materials such as brick masonry is one aspect where this distinctiv...

DOAJ Open Access (DOAJ) DOI: 10.26721/spafajournal.2021.5.651

La citerne el-Nabih à Alexandrie: un exemple d'utilisation de la photogrammétrie, de la lasergrammétrie et du modèle 3D sur un chantier de fouille archéologique

Laurent Borel • Revue Française de Photogrammétrie et de Télédétection (2014)

Parmi les grands réservoirs publics de la fin de la période médiévale, que compte encore la ville d'Alexandrie, l'un d'entre eux fait l'objet d'une étude architecturale et archéologique approfondie. Entreprise en 2003 par le Centre d'Études...

DOAJ Open Access (DOAJ) DOI: 10.52638/rfpt.2013.43

Green synthesis of silver nanoparticles using terrestrial fern (Gleichenia Pectinata (Willd.) C. Presl.): characterization and antimicrobial studies

Abiola Grace Femi-Adepoju, Adewumi Oluwasogo Dada, Kabir Opeyemi Otun, Adeyinka Olufemi Adepoju et al. • Heliyon (2019)

Novel silver nanoparticles from Gleichenia Pectinata (Willd.) C. Presl. was synthesized. A combination of spectroscopic and microscopic techniques were utilized to characterize the newly synthesized Gleichenia Pectinata Silver Nanoparticles...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.heliyon.2019.e01543

Characterization of thermally treated polypropylene powders with wide sintering window for powder bed fusion of polymers

Xiaodi Gong, Xia Gao, Ning Yu, Daijun Zhang et al. • Polymer Testing (2021)

One key issue restricting semi-crystalline polymers to be widely applied in powder bed fusion (PBF) of polymers is lack of good powder processability, especially a wide sintering window. In this work, a thermal treatment method with mixed d...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.polymertesting.2021.107078

3D Printing parameter optimisation combined with heat treatment for achieving high density and enhanced performance in refractory high-entropy alloys

Deyu Jiang, Miao Luo, Changxi Liu, Yashuo Zhang et al. • Virtual and Physical Prototyping (2025)

In this study, a Ti1.5Nb1Ta0.5Zr1Mo0.5 (TNTZM) high-entropy alloy was fabricated using laser powder bed fusion (LPBF). By integrating 63 sets of parameter trials with machine learning (ML) models, an optimised process window was identified,...

DOAJ Open Access (DOAJ) DOI: 10.1080/17452759.2025.2524524