Reset
Showing 20 of 20 academic articles

Equilibrial service composition model in Cloud manufacturing (ESCM) based on non-cooperative and cooperative game theory for healthcare service equipping

Ehsan Vaziri Goudarzi, Mahmoud Houshmand, Omid Fatahi Valilai, Vahidreza Ghezavati et al. • PeerJ Computer Science (2021)

Industry 4.0 is the digitalization of the manufacturing systems based on Information and Communication Technologies (ICT) for developing a manufacturing system to gain efficiency and improve productivity. Cloud Manufacturing (CM) is a parad...

DOAJ Open Access (DOAJ) DOI: 10.7717/peerj-cs.410

Impact of biomass ash content on biocomposite properties

Xianhui Zhao, Oluwafemi Oyedeji, Erin Webb, Sanjita Wasti et al. • Composites Part C: Open Access (2022)

Owing to its low cost and sustainable nature, lignocellulosic biomass has been utilized for reinforcing polymers, but it is crucial to understand the impact of high-ash concentrations in biomass on composite strength and processing. Biomass...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jcomc.2022.100319

Effects of Titanate Coupling Agent on Engineering Properties of Asphalt Binders and Mixtures Incorporating LLDPE-CaCO3 Pellet

Mohd Rosli Mohd Hasan, Zhanping You, Mohd Khairul Idham Mohd Satar, Muhammad Naqiuddin Mohd Warid et al. • Applied Sciences (2018)

This study was initiated to evaluate the performance of asphalt binders and mixtures incorporating linear low-density polyethylene- calcium carbonate (LLDPE-CaCO3) pellet, either with or without titanate coupling agent. The detailed manufac...

DOAJ Open Access (DOAJ) DOI: 10.3390/app8071029

Graphene Oxide and Reduced Derivatives, as Powder or Film Scaffolds, Differentially Promote Dopaminergic Neuron Differentiation and Survival

Noela Rodriguez-Losada, Noela Rodriguez-Losada, Rune Wendelbob, M. Carmen Ocaña et al. • Frontiers in Neuroscience (2020)

Emerging scaffold structures made of carbon nanomaterials, such as graphene oxide (GO) have shown efficient bioconjugation with common biomolecules. Previous studies described that GO promotes the differentiation of neural stem cells and ma...

DOAJ Open Access (DOAJ) DOI: 10.3389/fnins.2020.570409

Misalignment-modulated magnetoelastic transduction for field-tunable stiffness in chain-like magnetorheological elastomers: a Green-function-weighted traction-transfer framework

ShuLei Sun, Kesheng Zhang, Shunke Zhang, Ning Tian et al. • Materials Research Express (2026)

Magnetorheological elastomers (MREs) are field-responsive composites whose stiffness can be tuned by a magnetic field. In chain-like MREs, strong local magnetic interactions and Maxwell tractions do not necessarily translate into a measurab...

DOAJ Open Access (DOAJ) DOI: 10.1088/2053-1591/aeb47a

3D Printing parameter optimisation combined with heat treatment for achieving high density and enhanced performance in refractory high-entropy alloys

Deyu Jiang, Miao Luo, Changxi Liu, Yashuo Zhang et al. • Virtual and Physical Prototyping (2025)

In this study, a Ti1.5Nb1Ta0.5Zr1Mo0.5 (TNTZM) high-entropy alloy was fabricated using laser powder bed fusion (LPBF). By integrating 63 sets of parameter trials with machine learning (ML) models, an optimised process window was identified,...

DOAJ Open Access (DOAJ) DOI: 10.1080/17452759.2025.2524524

Physical Properties of Modified Polyphenylene Oxide as a Composite Material for Hydrogen Fuel Cell Stack Enclosure Suitable for Injection Molding

Soo-Lim Lee, Bong-Ju Kim, Seon-Bong Lee • Machines (2022)

There is an increasing need for securing development technology for suitable materials to obtain more productive and lightweight automobile parts, including hydrogen fuel cell stack enclosures. Due to the poor moldability of Poly-Phenylene ...

DOAJ Open Access (DOAJ) DOI: 10.3390/machines10080625

Design, manufacturing, and performance evaluation of heat pipe with three-segmented composite wick structure

Jiu Yu, Yubo Hu, Yaoxing Peng • Case Studies in Thermal Engineering (2026)

The wick structure functions as a core component for heat pipe (HP) and stands as one of the critical factors that dictate the performance of HP. Consequently, this paper puts forward an three-segmented composite wick structure, which is ma...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.csite.2026.107724

A study on high-shear and low-pressure grinding with body-armour-like abrasive tool (BAAT) for Inconel 718 superalloys

Yebing Tian, Chengjin Tian, Sohini Chowdhury, Jinguo Han et al. • Journal of Materials Research and Technology (2023)

A novel body-armour-like abrasive tool (BAAT) was developed for the high-shear and low-pressure grinding of super alloys with an aim to reduce the ratio of normal force to tangential force. A composite process model was developed based on f...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2023.04.205

Exploring fibre addition methods and mechanical properties of fibre-reinforced 3D printed concrete: A review

Syed Bustan Fatima Warsi, Biranchi Panda, Pankaj Biswas • Developments in the Built Environment (2023)

3D Concrete Printing (3DCP) is a growing field of sustainable technology that offers an avenue for rapid industrialisation of the construction industry. Over the years, many non-structural elements have been fabricated by 3D printing, thus ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.dibe.2023.100295

Effect of chemical treatment on the mechanical and thermal performance of flax fiber reinforced aluminium 6082 laminate: a machine learning-enhanced investigation

M. Vinod, B. S. Nithyananda, Shrishail B. Sollapur, Satish Gajbhiv et al. • Scientific Reports (2026)

Abstract This work examined the role of alkaline and epoxy-based surface chemical treatments on the mechanical and thermal properties of flax fiber reinforced Aluminum Alloy 6082 hybrid Fiber Metal Laminates (FMLs), integrated with machine ...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-026-58852-w

Manufacturing of a New Generations from the Recycled AL Scrape Reinforced with AL2O3 - GNS Composite Powder by Vortex Technique for Automotive Spare Parts

Fathei Nouh, Omayma El kady, Sabry abdel aziz • International Journal of Industry and Sustainable Development (2024)

This research addresses the urgent challenges facing the materials and metallurgical industries, driving manufacturers to seek innovative solutions for material recycling. Aluminum scrape in used to manufacture a composite material with a h...

DOAJ Open Access (DOAJ) DOI: 10.21608/ijisd.2024.302067.1074

Continuous monitoring biosensors for advanced healthcare and environmental applications: challenges, material innovations and future directions

Kiran Kumar Amireddy, P. V. R. Ravindra Reddy, C. Nagendranatha Reddy, P. Prabhakar Reddy • Frontiers in Sensors (2026)

This review critically discusses the development of continuous monitoring biosensors and the technological developments that have facilitated the transition from one-off or periodic measurement sensors to longer-term, connected and autonomo...

DOAJ Open Access (DOAJ) DOI: 10.3389/fsens.2026.1968999

A Competitive Design and Material Consideration for Fabrication of Polymer Electrolyte Membrane Fuel Cell Bipolar Plates

Noor Ul Hassan, Bahadir Tunaboylu, Ali Murat Soydan • Designs (2019)

The bipolar plate is one of the most significant components of a polymer electrolyte membrane (PEM) fuel cell, and contributes substantially to the cost structure and the weight of the stacks. A number of graphite polymer composites with di...

DOAJ Open Access (DOAJ) DOI: 10.3390/designs3010013

Manufacturing of Hierarchical (Nano-)Composite Structures: Numerical and Experimental Perspectives

Hatim Alotaibi, Constantinos Soutis, Masoud Jabbari • Applied Sciences (2026)

Thermoset polymer nanocomposites have considerable potential to improve the functionality and optimise the performance of composite structures. Such a nanocomposite generally consists of a modified polymer matrix (continuous phase) containi...

DOAJ Open Access (DOAJ) DOI: 10.3390/app162010379

Bio-Template Synthesis of V<sub>2</sub>O<sub>3</sub>@Carbonized Dictyophora Composites for Advanced Aqueous Zinc-Ion Batteries

Wei Zhou, Guilin Zeng, Haotian Jin, Shaohua Jiang et al. • Molecules (2023)

In terms of new-generation energy-storing devices, aqueous zinc-ion batteries (AZIBs) are becoming the prime candidates because of their inexpensive nature, inherent safety, environmental benignity and abundant resources. Nevertheless, due ...

DOAJ Open Access (DOAJ) DOI: 10.3390/molecules28052147