Reset
Showing 20 of 33 academic articles

Study on Contact Force and Vibration Characteristics of Composite Cylindrical Roller Bearing

Tie Qu, Qiang Bian, Guang Zeng, Chunjiang Zhao et al. • International Journal of Rotating Machinery (2022)

The composite cylindrical roller is composed of a hollow cylindrical roller and a filler body and is a new type of structure roller bearing. In order to explore the influence of different parameters on the contact characteristics and vibrat...

DOAJ Open Access (DOAJ) DOI: 10.1155/2022/7590924

Alterations in Hip and Knee Joint Contact Force Waveforms and Orientation Induced by Gait Modifications: A Case Study

Laura Rathmair, Willi Koller, Clara Egner, Kevin Kitir et al. • Current Issues in Sport Science (2026)

Introduction & Purpose Idiopathic torsional deformities of lower limb bones can affect a patient’s gait pattern and joint health, while their cause remains unidentified (Koller et al., 2026). Abnormal joint loadings and the progression of ...

DOAJ Open Access (DOAJ) DOI: 10.36950/2026.5ciss011

Finite element analysis on the near field properties of metallic cavities with atomic sharpness

Qiyuan Dai, Liang Ma, Li Li, Guangjun Tian • Results in Physics (2023)

Using finite element calculations, we investigated the near field properties of two types of commonly used metal nanostructures (a tip-substrate model representing a scanning tunneling microscope type setup (TS) and a nanoparticle-on-mirror...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.rinp.2023.106360

Numerical investigation of corroded middle‐high strength pipeline subjected to combined internal pressure and axial compressive loading

Linlin Lu, Lecai Liang • Energy Science & Engineering (2021)

Abstract Buried oil and gas pipelines may face the threat of geological disasters such as landslides, faults, and floods. However, long‐term buried oil and gas pipelines often have corrosion defects, which bring greater challenges to the sa...

DOAJ Open Access (DOAJ) DOI: 10.1002/ese3.830

Behavior study of the steel plate girder with a cellular honeycomb web

Haider K. AMMASH, Noora N. SHAFFAF • Przegląd Naukowy Inżynieria i Kształtowanie Środowiska (2023)

Based on the experimental test results of the authors, this investigation is concerned with the finite element analysis to examine and compare the load values and failure modes of the authors’ results. This research was conducted using the ...

DOAJ Open Access (DOAJ) DOI: 10.22630/srees.4743

Flexural Behaviour of Corroded RC Beams Strengthened with CFRCM: Refined Modelling, Parametric Analysis, and Design Assessment

Chaoqun Zeng, Jing-Pu Tang, Liangliang Wei, Miaochang Zhu et al. • Buildings (2026)

Reinforced concrete (RC) beams strengthened with carbon-fabric-reinforced cementitious matrix (CFRCM) systems have shown potential for restoring flexural performance, yet their effectiveness under different corrosion levels remains insuffic...

DOAJ Open Access (DOAJ) DOI: 10.3390/buildings16020377

Investigation of Defect Effects on Adhesively Bonded Joint Strength Using Cohesive Zone Modeling

Majid Jamal-Omidi, Mohammad Reza Mohammadi Suki • Journal of Mechanical Engineering (2018)

In this paper, effects of the defect in an adhesively bonded joint have been investigated using cohesive zone modeling. Consequently, a 3D finite element model of a single lap-joint is constructed and validated with experiments. Strength pr...

DOAJ Open Access (DOAJ) DOI: 10.2478/scjme-2018-0023

Fluid-Solid Interaction Analysis of a Flow Passing Cylinder Based on Variational Mode Decomposition

Zuo Yaju, Fang Mingkun, Zhu Di, Lu Jiahao et al. • E3S Web of Conferences (2024)

The fluid-structure interaction problem of cylindrical flow around the cylinder is a classic problem, especially in many fields such as energy engineering, fluid dynamics, engineering structure, energy utilization and development, and envir...

DOAJ Open Access (DOAJ) DOI: 10.1051/e3sconf/202452001017

Study of a constrained finite element elbow prosthesis: the influence of the implant placement

Lorenzo Nalbone, Francesco Monac, Luca Nalbone, Tommaso Ingrassia et al. • Journal of Orthopaedics and Traumatology (2023)

Abstract Background The functional results of total elbow arthroplasty (TEA) are controversial and the medium- to long-term revision rates are relatively high. The aim of the present study was to analyze the stresses of TEA in its classic c...

DOAJ Open Access (DOAJ) DOI: 10.1186/s10195-023-00690-x

Computational analysis of visible frequency plasmonic properties of graphene on wide band gap heterostructures

Muhammad Qamar, Ghulam Abbas, Meiyong Liao, Satoshi Koizumi et al. • Scientific Reports (2026)

Abstract Control over plasmonic properties and local electric field enhancement has become an essential aspect of many modern technologies. Here we investigate these phenomena in graphene / hexagonal boron nitride (G/h-BN) heterostructures ...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-026-40039-y

The Thermomechanical Finite Element Analysis of 3003-H14 Plates Joined by the GMAW Process

Maribel Hernández, Ricardo R. Ambriz, Christian García, David Jaramillo • Metals (2020)

The gas metal arc welding (GMAW) process was used to weld 3003-H14 plates under restricted and unrestricted thermal expansion. Experimental and numerical analysis were conducted to determine the relation between weld thermal cycles and resi...

DOAJ Open Access (DOAJ) DOI: 10.3390/met10060708

Field Observations and Failure Analysis of an Excavation Damaged Zone in the Horonobe Underground Research Laboratory

Kazuhei AOYAGI, Eiichi ISHII, Tsuyoshi ISHIDA • Journal of MMIJ (2017)

In the construction of a deep underground facility, the hydromechanical properties of the rock mass around an underground opening are changed significantly due to stress redistribution. This zone is called an excavation damaged zone (EDZ). ...

DOAJ Open Access (DOAJ) DOI: 10.2473/journalofmmij.133.25

Numerical Modal Analysis of Vibrations in a Three-Phase Linear Switched Reluctance Actuator

José Salvado, Maria do Rosário Calado, António Espírito Santo, Anna Guerman • Modelling and Simulation in Engineering (2017)

This paper addresses the problem of vibrations produced by switched reluctance actuators, focusing on the linear configuration of this type of machines, aiming at its characterization regarding the structural vibrations. The complexity of t...

DOAJ Open Access (DOAJ) DOI: 10.1155/2017/3258376