Reset
Showing 14 of 14 academic articles

Use of Experimental Design to Evaluate the Effect of the Incorporation of Quartzite Residues in Ceramic Mass for Porcelain Tile Production

Karina Ruiz Silva, Liszandra Fernanda Araújo Campos, Lisiane Navarro de Lima Santana • Materials Research (2018)

The potential of using quartzite residues in the composition of an industrial ceramic mass for porcelain tile production was investigated through experimental design. Chemical, physical and microstructural analyses were accomplished to unde...

DOAJ Open Access (DOAJ) DOI: 10.1590/1980-5373-mr-2018-0388

Materials science of concrete

Jan P. Skalny, Sidney Mindess, Francis Young • American Ceramic Society eBooks (1989)

Prediction of a Portland Cement's Properties from its Chemical and Mineralogical Compositon. Tricalcium Silicate Hydration: A Historical Overview. Thermodynamics of Hydration Reactions. Tricalcium Silicate Hydration: A Historical Overview. ...

OPENALEX

Materials for Total Hip Joint Prostheses: Biaxial Flexural Strength of Two Ceramic Systems

Bojana TABAKOVA, Ivanka KALIMANOVA, Ina YANKOVA, Hristiana NIKOLOVA • The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science (2010)

Total hip joint replacement is one of the most successful orthopaedic surgeries in the last decade. Essential part of total hip joint prostheses is the mobile joint “hemispherical head - hemispherical cup”. Functional properties and durabil...

DOAJ Open Access (DOAJ)

Investigation of Microstructure and Mechanical Behavior of Nanomodified Cement-Based Materials

Spyridoula G. Farmaki, Dimitrios A. Exarchos, Vasileios Dracopoulos, Anastasios Gkotzamanis et al. • Applied Mechanics (2026)

Recent advances in nanotechnology have highlighted the transformative potential of carbon-based nanomaterials, such as carbon nanofibers, carbon nanotubes, and graphene, in cementitious systems. These materials have shown a remarkable abili...

DOAJ Open Access (DOAJ) DOI: 10.3390/applmech7010013

Effects of adding bamboo fiber on various aspects of concrete performance: A state-of-the-art review

Longping Yan, Muwang Wei, Lei Huang, Huawei Li et al. • KSCE Journal of Civil Engineering (2026)

This review systematically examines the role of bamboo fiber (BF) in enhancing the performance of cement-based composites, with a particular focus on workability, mechanical properties, durability, and sustainability. BF, as a renewable and...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.kscej.2026.100676

Non- Linear FE Modeling of Two-Way Reinforced Concrete Slab of NSC, HSC and LWC under Concentrated Load

Shatha S. Kareem, Shaimaa T. Sakin, Mohammad Z. Yousif • Journal of Engineering and Sustainable Development (2013)

This paper presents the numerical study to simulate the behavior six specimens of two-way RC slab of normal strength concrete (NSC), high strength concrete (HSC) and light weight concrete (LWC) with two steel ratio of 0.005 and 0.002 under ...

DOAJ Open Access (DOAJ)

Flexural Behaviour of Corroded RC Beams Strengthened with CFRCM: Refined Modelling, Parametric Analysis, and Design Assessment

Chaoqun Zeng, Jing-Pu Tang, Liangliang Wei, Miaochang Zhu et al. • Buildings (2026)

Reinforced concrete (RC) beams strengthened with carbon-fabric-reinforced cementitious matrix (CFRCM) systems have shown potential for restoring flexural performance, yet their effectiveness under different corrosion levels remains insuffic...

DOAJ Open Access (DOAJ) DOI: 10.3390/buildings16020377

Tribological and flexural characterization of dissimilar AA2024-T3/AA6082-T6 friction stir welded joints

Paritosh Mishra, Brijesh Prasad, Sunil Chamoli, Ibrahim M. Alarifi • Journal of Materials Research and Technology (2026)

The escalating demand for lightweight, high-strength structures in the aerospace and automotive sectors necessitates robust joining technologies for dissimilar aluminium alloys. This study systematically investigates the effects of friction...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2026.08.256

Effect of Accelerated Weathering on Color and Physico-mechanical Properties of Wood-plastic Composites with Nano Titanium Dioxide

Seyyed Khalil HosseiniHashemi, Ahad Rahimi, Nadir Ayrilmis • BioResources (2024)

Polypropylene (PP) with black locust wood flour and maleic grafted polypropylene were used to prepare wood plastic composites (WPC) by injection molding. The effect of the addition of nano titanium oxide (nano TiO2) on the properties of the...

DOAJ Open Access (DOAJ)

A study on the flexural behaviour of lightweight concrete beams reinforced with pumice, silica fume and carbon fibers

Guledagudd Chaitali B., Praveen Kannam, Kulkarni Vinayak N. • Journal of the Mechanical Behavior of Materials (2026)

Lightweight aggregate concrete (LWAC) incorporating pumice aggregates offers a sustainable alternative to conventional concrete, enabling a reduced self-weight while maintaining adequate strength and stiffness for structural applications. T...

DOAJ Open Access (DOAJ) DOI: 10.1515/jmbm-2025-0113

A Competitive Design and Material Consideration for Fabrication of Polymer Electrolyte Membrane Fuel Cell Bipolar Plates

Noor Ul Hassan, Bahadir Tunaboylu, Ali Murat Soydan • Designs (2019)

The bipolar plate is one of the most significant components of a polymer electrolyte membrane (PEM) fuel cell, and contributes substantially to the cost structure and the weight of the stacks. A number of graphite polymer composites with di...

DOAJ Open Access (DOAJ) DOI: 10.3390/designs3010013