Reset
Showing 12 of 12 academic articles

Characterization of thermally treated polypropylene powders with wide sintering window for powder bed fusion of polymers

Xiaodi Gong, Xia Gao, Ning Yu, Daijun Zhang et al. • Polymer Testing (2021)

One key issue restricting semi-crystalline polymers to be widely applied in powder bed fusion (PBF) of polymers is lack of good powder processability, especially a wide sintering window. In this work, a thermal treatment method with mixed d...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.polymertesting.2021.107078

Introduction to Nuclear Engineering

Supathorn Phongikaroon • CRC Press eBooks (2023)

Introduction to Nuclear Engineering serves as an accompanying study guide for a complete, introductory single-semester course in nuclear engineering. It is structured for general class use, alongside fundamental nuclear physics and engineer...

OPENALEX DOI: https://doi.org/10.1201/9781003272588

A First-principles analysis of Structural, Electronic, Elastic, and vacant properties of BCC, FCC and HCP tungsten at different electronic temperatures

X.B. Ye, B.C. Pan • Nuclear Materials and Energy (2023)

Since tungsten (W) was considered as the most promising plasma facing materials (PFMs) in fusion reactors, there has been extensive research on the physical performance of W-PFMs. It is found that under the extreme conditions in a fusion re...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.nme.2023.101447

Survey of Hybrid Cloud Workflow Scheduling

LIU Peng, LIU Bo, ZHOU Na-qin, PENG Xin-yi, LIN Wei-wei • Jisuanji kexue (2022)

In the context of data explosion,traditional cloud computing is faced with the dilemma of insufficient local cloud resources and high expansion cost.However,the newly emerging hybrid cloud combining resource-rich public cloud and data-sensi...

DOAJ Open Access (DOAJ) DOI: 10.11896/jsjkx.210300303

Magnetic field reconstruction from proton radiography via physics-guided out-of-distribution filtering

Chun-Sung Jao, Chiung-Yin Chang, Kun-Han Lee, Hsiao-Hsuan Lin et al. • APL Machine Learning (2026)

Reconstructing multidimensional vector fields from path-integrated projection data is a fundamental challenge in high-energy-density physics, particularly when experimental sources exhibit spectral broadening and shot-to-shot jitter. We pre...

DOAJ Open Access (DOAJ) DOI: 10.1063/5.0331075

Effect of heat treatment on the microstructure and corrosion resistance of laser powder bed fusion ODS-316L

Qian Zheng, Chao Lu, Yan Yin, Xiaoli Cui et al. • Journal of Materials Research and Technology (2025)

As a candidate cladding material for fourth-generation nuclear energy systems, the microstructure and properties of oxide dispersion strengthened 316L (ODS-316L) steel are significantly affected by heat treatment (HT) processes. This paper ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2025.09.256

QG-WRN: A Quantum-Enhanced Graph Convolutional Wide Residual Network for ASD Diagnosis via Neuroimaging Sensing Technology

Nanting Huang, Xiaoyu Li, Xin Yang, Li Xie et al. • Sensors (2026)

The pathological mechanism of autism spectrum disorder (ASD) exhibits dual heterogeneity: abnormal local energy metabolism and brain-wide high-order topological failure. To synergistically characterize these complex signals captured by adva...

DOAJ Open Access (DOAJ) DOI: 10.3390/s26133997

Intelligent Distribution-Network Fault Handling via Cross-Modal Semantic Fusion and Knowledge-Graph Reasoning

Fangzhou Liu, Yang Zhao, Jiqiao Chen, Ting Luo • EAI Endorsed Transactions on Energy Web (2026)

Power distribution network fault handling imposes stringent requirements on both response timeliness and decision reliability. The high penetration of distributed renewable generation, the widespread deployment of power-electronic devices, ...

DOAJ Open Access (DOAJ) DOI: 10.4108/ew.13683

AI-driven data fusion modeling for enhanced prediction of mixed-mode I/III fracture toughness

Anantaya Timtong, Atthaphon Ariyarit, Wanwanut Boongsood, Prasert Aengchuan et al. • Results in Engineering (2024)

This research evaluates the use of artificial intelligence to enhance the accuracy of predictions for mixed-mode I/III fracture toughness in polymethyl methacrylate . Traditionally, assessing fracture toughness relies heavily on destructive...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.rineng.2024.103289