Reset
Showing 17 of 17 academic articles

Artificial neural network modeling of mixed convection viscoelastic hybrid nanofluid across a circular cylinder with radiation effect: Case study

Syed M. Hussain, Rahimah Mahat, Nek Muhammad Katbar, Imran Ullah et al. • Case Studies in Thermal Engineering (2023)

As a result of its use in the manufacturing and construction industries, research on the flow of nanofluid is rather well-known among academics and professionals in related fields. It is helpful for electrical equipment to utilize it for co...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.csite.2023.103487

The effect of freeze-thaw cycles on the frost resistance of energy tunnels in cold regions

Yue Guo, Chenglong Wang, Abdelmalek Bouazza, Xuanming Ding et al. • Case Studies in Thermal Engineering (2026)

Seasonal temperature fluctuations in cold regions induce freeze–thaw cycles that can significantly impact the structural safety and maintenance of tunnels. This study uses the Daban Mountain Tunnel as a case study to develop a full-scale nu...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.csite.2026.108518

Numerical Simulation of Cooling Plate Using K-Epsilon Turbulence Model to Cool Down Large-Sized Graphite/LiFePO<sub>4</sub> Battery at High C-Rates

Satyam Panchal, Krishna Gudlanarva, Manh-Kien Tran, Münür Sacit Herdem et al. • World Electric Vehicle Journal (2022)

In this paper, an analogous study of the velocity and temperature profiles inside microchannel cooling plates (with hydraulic diameter of 6 mm), placed on a large pouch-type LiFePO4 battery, is presented using both the laboratory and simula...

DOAJ Open Access (DOAJ) DOI: 10.3390/wevj13080138

Introduction to Nuclear Engineering

John R. Lamarsh, Edward Melkonian • Physics Today (1977)

(Most chapters end with References and Problems). 1. Nuclear Engineering. 2. Atomic and Nuclear Physics. Fundamental Particles. Atomic and Nuclear Structure. Atomic and Molecular Weight. Atomic and Nuclear Radii. Mass and Energy. Particle W...

OPENALEX DOI: https://doi.org/10.1063/1.3037597

A case study on morphological aspects of distinct magnetized 3D hybrid nanoparticles on fluid flow between two orthogonal rotating disks: An application of thermal energy systems

Zahra Abdelmalek, M. Zubair Akbar Qureshi, S. Bilal, Qadeer Raza et al. • Case Studies in Thermal Engineering (2021)

The consolidation power of different nanomaterials such as metallic nanoparticles and metallic-oxides nanoparticles in a new-fangled and energetic hybrid material should give rise to fascinating properties that combine the advantages of eac...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.csite.2020.100744

Conjugate mixed convection heat transfer with internal heat generation in a lid-driven enclosure with spinning solid cylinder

Md. Jisan Mahmud, Ahmed Imtiaz Rais, Md. Rakib Hossain, Sumon Saha • Heliyon (2022)

The current study investigates conjugate mixed convection heat transmission with internal heat generation in a square enclosure driven by a sliding lid and a solid cylinder with a heat-conducting surface at its center. The enclosure has a s...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.heliyon.2022.e11968

An assessment of the mathematical model for estimating of entropy optimized viscous fluid flow towards a rotating cone surface

Yong-Min Li, M. Ijaz Khan, Sohail A. Khan, Sami Ullah Khan et al. • Scientific Reports (2021)

Abstract Entropy optimization in convective viscous fluids flow due to a rotating cone is explored. Heat expression with heat source/sink and dissipation is considered. Irreversibility with binary chemical reaction is also deliberated. Nonl...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-021-89739-7

CFD Simulation of the Slot Jet Impingement Heat Transfer Process and Application to a Temperature Control System for Galvanizing Line of Metal Band

Stefano Cademartori, Carlo Cravero, Martino Marini, Davide Marsano • Applied Sciences (2021)

A CFD model to simulate the cooling technique trough slot jet impingement has been developed. Such a technique has been tested on an existing vertical galvanizing industrial line, which initially envisaged a round jet configuration, the sub...

DOAJ Open Access (DOAJ) DOI: 10.3390/app11031149

Air distribution to reduce nitrogen oxide emissions in the furnace of a boiler with tangential combustion scheme

Andrey V. Gil, Kirill I. Maltsev, Nikita V. Abramov, Stanislav A. Puzyrev et al. • Известия Томского политехнического университета: Инжиниринг георесурсов (2024)

Relevance. Determined by the importance of analyzing the combustion characteristics and factors affecting the emission of nitrogen oxides (NOx) in the furnace chamber of pulverized coal-fired power boiler unit when installing tertiary air n...

DOAJ Open Access (DOAJ) DOI: 10.18799/24131830/2024/12/4883

Solar heat transport analysis of Falkner Skan Casson ternary hybrid nanoparticles over a permeable wedge

Khan Mohsin, Sheheryar Shah, Amra Al Kenany, Meshal Shutaywi et al. • Discover Nano (2026)

Abstract In the modern era, energy has become a vital concern across all sectors, while efficient energy generation remains a significant challenge for scientists and engineers. To overcome this issue, researchers have developed ternary hyb...

DOAJ Open Access (DOAJ) DOI: 10.1186/s11671-026-04821-1

Towards the technological maturity of membrane distillation: the MD module performance curve

Pablo López-Porfiri, Sebastián Ramos-Paredes, Patricio Núñez, Patricia Gorgojo • npj Clean Water (2023)

Abstract Membrane distillation (MD) is constantly acknowledged in the research literature as a promising technology for the future of desalination, with an increasing number of studies reported year after year. However, real MD applications...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41545-023-00234-0

Rarefied Reactive Gas Flows over Simple and Complex Geometries Using an Open-Source DSMC Solver

Rodrigo Cassineli Palharini, João Luiz F. Azevedo, Diego Vera Sepúlveda • Aerospace (2025)

During atmospheric reentry, a significant number of chemical reactions are produced inside the high-temperature shock wave formed upstream of the spacecraft. Chemical reactions can significantly alter the flowfield structure surrounding the...

DOAJ Open Access (DOAJ) DOI: 10.3390/aerospace12080651

Atomic heat transfer in nanoscale contacts mediated by van der Waals interactions

Seunghoe Koo, Jaehee Park, Junki Jung, Hyo Jae Yoon et al. • Communications Materials (2026)

Abstract Van der Waals-interfacial heat transfer is a key element in thermal problems in atomic-scale devices including quantum computing devices, solid-state batteries, and solar power generation devices. However, its characterization rema...

DOAJ Open Access (DOAJ) DOI: 10.1038/s43246-026-01197-8

Effect of Heated Wall Corrugation on Thermal Performance in an L-Shaped Vented Cavity Crossed by Metal Foam Saturated with Copper–Water Nanofluid

Luma F. Ali, Hussein Togun, Abdellatif M. Sadeq • Computation (2025)

Practical applications such as solar power energy systems, electronic cooling, and the convective drying of vented enclosures require continuous developments to enhance fluid and heat flow. Numerous studies have investigated the enhancement...

DOAJ Open Access (DOAJ) DOI: 10.3390/computation13090218

Evaluation of Indoor Thermal Environments Using a Novel Predicted Mean Vote Model Based on Artificial Neural Networks

Xiaosai Duan, Suihuai Yu, Jianjie Chu, Dengkai Chen et al. • Buildings (2022)

The assessment of indoor thermal environments is crucial to achieving thermal comfort and energy efficiency. However, the inaccurate evaluation and strong nonlinear variations of thermal comfort parameters limit engineering designs. Therefo...

DOAJ Open Access (DOAJ) DOI: 10.3390/buildings12111880

Comprehensive framework of machine learning and deep learning architectures with metaheuristic optimization for high-fidelity prediction of nanofluid specific heat capacity

Priya Mathur, Dheeraj Kumar, Farhan Sheth, Hammad Shaikh et al. • Scientific Reports (2025)

Abstract Accurately predicting the specific heat capacity of nanofluids is critical for optimizing their performance in engineering and industrial applications. This study explores twelve machine learning and deep learning models using conv...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-025-28268-z

AI-heat transfer analysis of casson fluid in uniformly heated enclosure with semi heated baffle

Khalil Ur Rehman, Wasfi Shatanawi, Lok Yian Yian • International Journal of Thermofluids (2025)

The heat transfer in Casson fluid with natural convection claims various applications namely thermal regulation in biological systems, solar collectors, polymer processing, and geothermal applications to mention just a few. Owing to such mo...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.ijft.2025.101148