Reset
Showing 20 of 33 academic articles

Why Socio-metabolic Studies are Central to Ecological Economics

Simron J Singh, Simran Talwar, Megha Shenoy • Ecology, Economy and Society – The INSEE Journal (2021)

Global material extraction has tripled since the 1970s, with more than 100 billion tonnes of materials entering the world economy each year. Only 8.6% of this is recycled, while 61% ends up as waste and emissions that is the leading cause o...

DOAJ Open Access (DOAJ) DOI: 10.37773/ees.v4i2.461

Synergetic method between materials flow and energy flow in iron and steel intelligent manufacturing

ZHENG Zhong, HUANG Shi-peng, LONG Jian-yu, GAO Xiao-qiang • 工程科学学报 (2017)

Iron and steel enterprises are facing difficult problems such as increasing inventory, excess capacity, and poor profitability. It is urgent to solve them through the development of green and intelligent manufacturing technology for iron an...

DOAJ Open Access (DOAJ) DOI: 10.13374/j.issn2095-9389.2017.01.015

Lysosome blockade induces divergent metabolic programs in macrophages and tumours for cancer immunotherapy

Jing Ma, Ruijuan Ma, Xueke Zeng, Liming Zhang et al. • Journal of Experimental & Clinical Cancer Research (2023)

Abstract Background Platinum-drugs based chemotherapy in clinic increases the potency of tumor cells to produce M2 macrophages, thus leading to poor anti-metastatic activity and immunosuppression. Lysosome metabolism is critical for cancer ...

DOAJ Open Access (DOAJ) DOI: 10.1186/s13046-023-02768-0

Phase-field models in materials science

Ingo Steinbach • Modelling and Simulation in Materials Science and Engineering (2009)

The phase-field method is reviewed against its historical and theoretical background. Starting from Van der Waals considerations on the structure of interfaces in materials the concept of the phase-field method is developed along historical...

OPENALEX DOI: https://doi.org/10.1088/0965-0393/17/7/073001

RETRACTED ARTICLE: A brief comparative examination of tangent hyperbolic hybrid nanofluid through a extending surface: numerical Keller–Box scheme

Wasim Jamshed, M. Prakash, S. Suriya Uma Devi, Rabha W. Ibrahim et al. • Scientific Reports (2021)

Abstract A novel hybrid nanofluid was explored in order to find an efficient heat-transmitting fluid to replace standard fluids and revolutionary nanofluids. By using tangent hyperbolic hybrid combination nanoliquid with non-Newtonian ethyl...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-021-03392-8

Simulation and experimental verification of the edge effect of composites on the infiltration process of RTM forming

ZHU Hongye, WANG Xiaoxu, LYU Jixiang, HAO Shulei • Xi'an Gongcheng Daxue xuebao (2025)

To study the influence of edge effects on the resin filling flow pattern in the RTM process of composite materials, the finite element software PAM-RTM was used to simulate and analyze the impregnation process of the blade preforms in RTM.B...

DOAJ Open Access (DOAJ) DOI: 10.13338/j.issn.1674-649x.2025.04.002

Analysis of methods for accounting cargo vehicles in traffic flow of a regulated crossroad

V. V. Donchenko, A. N. Shumskiy • Вестник СибАДИ (2023)

Introduction. The formation of a ‘cargo frame’ around large cities leads to a change in the composition of the traffic flow on bypass roads, and an increase in the total traffic flow of trucks of various categories. In addition, the active ...

DOAJ Open Access (DOAJ) DOI: 10.26518/2071-7296-2023-20-2-218-229

Effects of Titanate Coupling Agent on Engineering Properties of Asphalt Binders and Mixtures Incorporating LLDPE-CaCO3 Pellet

Mohd Rosli Mohd Hasan, Zhanping You, Mohd Khairul Idham Mohd Satar, Muhammad Naqiuddin Mohd Warid et al. • Applied Sciences (2018)

This study was initiated to evaluate the performance of asphalt binders and mixtures incorporating linear low-density polyethylene- calcium carbonate (LLDPE-CaCO3) pellet, either with or without titanate coupling agent. The detailed manufac...

DOAJ Open Access (DOAJ) DOI: 10.3390/app8071029

Fractal aggregates in geophysics

Paul Meakin • Reviews of Geophysics (1991)

The combination of small particles to form larger structures is important in a broad range of natural processes, including the flocculation of organic and mineral particles in rivers, estuaries, and the open sea, the growth of smoke particl...

OPENALEX DOI: https://doi.org/10.1029/91rg00688

Green’s functions for geophysics: a review

Ernian Pan • Reports on Progress in Physics (2019)

The Green's function (GF) method, which makes use of GFs, is an important and elegant tool for solving a given boundary-value problem for the differential equation from a real engineering or physical field. Under a concentrated source, the ...

OPENALEX Open Access DOI: https://doi.org/10.1088/1361-6633/ab1877

Hybrid Dynamic Traffic Model for Freeway Flow Analysis Using a Switched Reduced-Order Unknown-Input State Observer

Yuqi Guo, Bin Li, Matthew Daniel Christie, Zongzhi Li et al. • Sensors (2020)

This paper introduces a new methodology for reconstructing vehicle densities of freeway segments by utilizing the limited data collected by traffic-counting sensors and developing a macroscopic traffic stream model formulated as a switched ...

DOAJ Open Access (DOAJ) DOI: 10.3390/s20061609

An agent-based modeling framework for the design of a dynamic closed-loop supply chain network

Ayşegül Bozdoğan, Latife Görkemli Aykut, Neslihan Demirel • Complex & Intelligent Systems (2022)

Abstract The supply chain is a dynamic and uncertain system consisting of material, information, and fund flows between different organizations, from the acquisition of the raw materials to the delivery of the finished products to the end c...

DOAJ Open Access (DOAJ) DOI: 10.1007/s40747-022-00780-z

Highly Efficient Leaf Base Protoplast Isolation and Transient Expression Systems for Orchids and Other Important Monocot Crops

Rui Ren, Rui Ren, Jie Gao, Dongmei Yin et al. • Frontiers in Plant Science (2021)

Versatile protoplast platforms greatly facilitate the development of modern botany. However, efficient protoplast-based systems are still challenging for numerous horticultural plants and crops. Orchids are globally cultivated ornamental an...

DOAJ Open Access (DOAJ) DOI: 10.3389/fpls.2021.626015

Experimental investigation on phase change behavior of nanocomposite phase change material filled inside the shell and tube heat exchanger

Ayyappan M, Muthiah A • Materials Research Express (2026)

In this paper, melting and solidification characteristics of composite PCM filled inside the shell and tube heat exchanger were investigated experimentally. ZnO nanoparticles (NPs) were synthesized using the sol–gel method. Myristic acid (M...

DOAJ Open Access (DOAJ) DOI: 10.1088/2053-1591/ae44e7

A case study on morphological aspects of distinct magnetized 3D hybrid nanoparticles on fluid flow between two orthogonal rotating disks: An application of thermal energy systems

Zahra Abdelmalek, M. Zubair Akbar Qureshi, S. Bilal, Qadeer Raza et al. • Case Studies in Thermal Engineering (2021)

The consolidation power of different nanomaterials such as metallic nanoparticles and metallic-oxides nanoparticles in a new-fangled and energetic hybrid material should give rise to fascinating properties that combine the advantages of eac...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.csite.2020.100744

Evaluation of experimentally observed asymmetric distributions of hardness, strain and residual stress in cold drawn bars by FEM-simulation

Juliana Zottis, Carla Adriana Theis Soares Diehl, Alexandre da Silva Rocha • Journal of Materials Research and Technology (2018)

The purpose of this paper is to investigate the correlation of strain and hardness parameters in a drawing process chain of an SAE 1045 steel bar. The present work discusses the application of the experimental and numerical method of analys...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2018.01.004

Optimization of Metal Inert Gas Welding Process during Joining of Structural Steels- An Overview

Misra Ravindra Kumar, Porwal Rajesh Kumar • E3S Web of Conferences (2020)

Metal Inert Gas welding is a fast, reliable and cost effective technique for joining of different ferrous materials and steels used in the construction of large structures like Fe410WA, IS2062, SS304, AISI1040 and AISI316 etc. To obtain bet...

DOAJ Open Access (DOAJ) DOI: 10.1051/e3sconf/202018401028

Improving Minutiae Image of Latent Fingerprint Detection on Non-Porous Surface Materials under UV Light Using Sulfur Doped Carbon Quantum Dots from Magnolia Grandiflora Flower

David Nugroho, Won-Chun Oh, Saksit Chanthai, Rachadaporn Benchawattananon • Nanomaterials (2022)

In this study, carbon quantum dots (CQDs) from Magnolia Grandiflora flower as a carbon precursor were obtained using a hydrothermal method under the optimized conditions affected by various heating times (14, 16, 18, and 20 min) and various...

DOAJ Open Access (DOAJ) DOI: 10.3390/nano12193277

Existence and regularity of solutions of a phase field model for solidification with convection of pure materials in two dimensions

Jose Luiz Boldrini, Cristina Lucia Dias Vaz • Electronic Journal of Differential Equations (2003)

We study the existence and regularity of weak solutions of a phase field type model for pure material solidification in presence of natural convection. We assume that the non-stationary solidification process occurs in a two dimensional bou...

DOAJ Open Access (DOAJ)