Home »
Academic Articles & Research Papers
Showing 11 of 11 academic articles
Komissarchuk Olga, Xu Zhengbin, Hao Hai • China Foundry
(2014)
Porous aluminum alloys produced by the metal-gas eutectic method or GASAR process need to be performed under a certain pressure of hydrogen, and to carry over melt to a tailor-made apparatus that ensures directional solidification. Hydrogen...
DOAJ
Open Access (DOAJ)
Miaomiao Wang, Xing Ming, Qiao Wang, Hongyao Ding et al. • Journal of Materials Research and Technology
(2024)
Magnesium potassium phosphate cement-based (MKPC) coating is regarded as an attractive green coating that improves the corrosion resistance of metals. Unfortunately, practical use remains challenging owing to the rapid solidification and ha...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2024.11.220
Ayyappan M, Muthiah A • Materials Research Express
(2026)
In this paper, melting and solidification characteristics of composite PCM filled inside the shell and tube heat exchanger were investigated experimentally. ZnO nanoparticles (NPs) were synthesized using the sol–gel method. Myristic acid (M...
DOAJ
Open Access (DOAJ)
DOI: 10.1088/2053-1591/ae44e7
Jose Luiz Boldrini, Cristina Lucia Dias Vaz • Electronic Journal of Differential Equations
(2003)
We study the existence and regularity of weak solutions of a phase field type model for pure material solidification in presence of natural convection. We assume that the non-stationary solidification process occurs in a two dimensional bou...
DOAJ
Open Access (DOAJ)
Yue Zhang, Jun Xiao, Juhua Liang, Wei Pei et al. • Journal of Materials Research and Technology
(2022)
Super austenitic stainless steel (SASS) was prepared by non-consumable vacuum arc melting for the first time. The effects of rare earth (RE) elements on its solidification microstructure and segregation behavior were investigated. The σ pha...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2022.04.120
William F. Smith (1993)
1 Introduction to Materials Science and Engineering 2 Atomic Structure and Bonding 3 Crystal and Amorphous Structures in Materials 4 Solidification, Crystalline Imperfections 5 Thermally Activated Processes and Diffusion in Solids 6 Mechani...
OPENALEX
Van Vlack, H Lawrence (1959)
1. Introduction to Materials Science and Engineering. Materials and Civilization. Materials and Engineering. Structure/Properties/Performance. Types of Materials. Summary. Key Words. Practice Problems. Test Problems. 2. Atomic Bonding and C...
OPENALEX
Alaaldeen Abdallah, András Roósz, Arnold Rónaföldi, Zsolt Veres • Crystals
(2024)
During the solidification process, microstructures are affected by the experimental conditions, the thermophysical characteristics of the alloy, and the type of grain-refining particles. Unidirectional solidification experiments were perfor...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/cryst14070638
Lei Zhang, Yiru Huang, Leiming Yan, Jinghao Ge et al. • Advanced Intelligent Systems
(2024)
Making computers automatically extract latent scientific knowledge from literature is highly desired for future materials and chemical research in the artificial intelligence era. Herein, the natural language processing (NLP)‐based machine ...
DOAJ
Open Access (DOAJ)
DOI: 10.1002/aisy.202300678
Johannes L. Otto, Lukas M. Sauer, Malte Brink, Thorge Schaum et al. • Materials & Design
(2023)
Nickel-based filler metals are frequently used in high temperature vacuum diffusion brazing for austenitic stainless-steel joints when components are subjected to high static or dynamic loads, corrosive environments and elevated temperature...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.matdes.2023.112401
Cuixia Liu, Meng Meng, Xian Luo • Metals
(2025)
Based on the innovative mode driven by “data + artificial intelligence”, in this study, three methods, namely Gaussian noise (GAUSS Noise), the Generative Adversarial Network (GAN), and the optimized Generative Adversarial Network (GANPro),...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/met15070733